DOI QR코드

DOI QR Code

Design and Parametric Study on Discone Antenna for Broadband RF Test Chamber

  • Oh, Soon-Soo (Dept. of Electronics Engineering, Chosun University) ;
  • Kim, In-Ryeol (Dept. of Electronics Engineering, Chosun University) ;
  • Choi, Dong-Geun (National Radio Research Agency) ;
  • Park, Wook-Ki (Incheon Economy Industry Information Technopark, Future Industrial Technology Center)
  • Received : 2016.10.24
  • Accepted : 2016.12.26
  • Published : 2016.12.30

Abstract

This paper discusses the characteristics and effects of dielectric inner-supports on discone antenna for broadband RF test chamber, and the verification has been performed by simulation. Several design parameters such as the thickness of the gap support, the position of the side support, and the thickness of the side support has been analyzed. The thickness of the gap support affected the reflection coefficient. An effect of the offset of the side support from the center was slight below 3 GHz and significant above 3 GHz. The thickness of the side support did not affect the reflection coefficient or the gain much. The performance of the fabricated discone antenna was in good agreement with the simulated results. This investigation of a dielectric support effects could be used to design a commercial discone antenna for broadband RF test chamber, focusing on electrical performance and mechanical stability.

Keywords

References

  1. Lei L., Lu J., Jiang Y., Shen X. S., Li Y., Zhong Z., and Lin C.(2016), "Stochastic Delay Analysis for Train Control Services in Next-Generation High-Speed Railway Communications System," IEEE Transactions on Intelligent Transportation Systems, vol. 17, no. 1, pp. 48-64. https://doi.org/10.1109/TITS.2015.2450751
  2. Song, J. W., Kim B. H., Jeong R. G., and Kwak K. S.(2012), "Spatial Coding using Data Information and Antenna Selection Technique in MIMO System," The Journal of The Korea Institute of Intelligent Transport Systems, vol. 11, no. 6, pp. 81-88. https://doi.org/10.12815/kits.2012.11.6.081
  3. Ahn S. K., Jeong G. T., Lee H. C. and Kwak K. S.(2014), "A 4-port MIMO Antenna for LTE Femtocell using Cross Decoupler," The Journal of The Korea Institute of Intelligent Transport Systems, vol. 13, no. 2, pp. 50-56. https://doi.org/10.12815/kits.2014.13.2.050
  4. Vogt-Ardatjew R., van de Beek S., and Leferink F.(2012), "Wide-band antennas for reverberation chambers," in International Symposium on Electromagnetic Compatibility, Pittsburg, USA.
  5. Raimundo X., Salous S., and Nasr K.(2012), " UWB MIMO measurements in reverberation chamber and indoor environment," in Proc. Int. Symp. Signals, Systems, and Electronics, Potsdam, Germany.
  6. Volakis J.(2007), Antenna Engineering Handbook, McGraw-Hill, pp. 408-416.
  7. Stutzman W. L. and Thiele G. A.(1998), Antenna Theory and Design, John Wiley & Sons, pp. 243-245.
  8. Kraus J. D. and Marhefka R. J. (2002), Antennas for all Applications, McGraw-Hill, p. 638.
  9. Kandoian A. G.(1946), "Three new antenna types and their applications," Proc. IRE, vol. 34, pp. 70W-75W.
  10. Persson K., Gustafsson M., Kristensson G., and Widenberg B.(2014), "Radome diagnostics- Source reconstruction of phase objects with an equivalent currents approach," IEEE Trans. on Antennas and Propagation, vol. 62, no. 4, 2041-2051. https://doi.org/10.1109/TAP.2014.2298534
  11. High-Frequency Structure Simulator (HFSS), ANSYS.