• Restorative Dentistry and Endodontics
• /
• v.13 no.2
• /
• pp.337-348
• /
• 1988

The purpose of this study was to examine the fracture strength and characteristics of teeth with MOD cavity preparation. Freshly extracted sound maxillary premolars were cleaned and stored in normal saline solution $37^{\circ}C$ for 72 hours before experiments. The roots of teeth were embedded in a self-curing resin, and the exposed crown were maintained in a vertical position by a modelling wax in a brass ring. The MOD cavities were prepared with No. 57 carbide bur under high speed to a depth of 2.0mm and a width of 2.0mm(Fig.1). All the prepared teeth specimens were divided into 7 groups according to the mode of cavity form and restorative materials (Table 1, 2): Group I, unpreapred, intact teeth as control Group II, prepared cavity without restoration Group III, prepared teeth restored with amalgam Group IV, prepared teeth restored with composite resin (P-10) Group V, prepared teeth with beveled enamel margins restored with composite resin (P-10) Group VI, prepared teeth restored with light-cured composite resin (P-30) Group VII, prepard teeth with beveled enamel margins restored with light-cured composite resin (P-30) After placement of restorations, all of the specimens were stored in water at $37^{\circ}C$ for 72 hours before testing. All of the specimens were tested on the Instron Universal Testing machine (No. 6025) in order to evaluate the strength of fracture. One metal ball 5.0mm in diameter contacting the specimens parallel to the occlusal surface was used to in this study (Fig. 1). The fracture characteristics of the specimens were examined with naked eye and in the scanning electron microscope (JSM-20). The results obtained from this study were as follows: 1. The mean fracture strength was the highest in group VI and that in group II was the lowest. 2. The progress of crack of teeth propagated into the pulp cavity. 3. In case of the group of the restored teeth, the crack occurred to be accompanied with cuspal fracture. 4. The crack of restored teeth was initiated along the pulpo-axial line angle of the cavity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.8
• /
• pp.1169-1174
• /
• 2005

This study was carried out to investigate the biological effect of deer's antler velvet on the testicular toxicity of rats exposed to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD ). Thirty male rats were divided into three equal groups. The control group received vehicle (DMSO/acetone/soybean oil mixture) and saline; single dose of 50 $/mu$g/kg body weight TCDD was injected intraperitoneally into the single TCDD-treated and test group. Test group received ethanol extract of antler velvet (EAV) at daily dose of 20 mg/kg body weight for 5 weeks from one week before TCDD exposure. Decrease in body weight increment was less remarkable in test group compared with that of TCDD-treated group. TCDD-induced decrease in testicular weight, microtubular diameter and Johnson's score, and lesion were significantly alleviated by the treatment of EAV. This result led us to the conclusion that antler velvet can attenuate TCDD-induced testicular toxicity in rats.

• Korean Journal of Plant Resources
• /
• v.22 no.1
• /
• pp.5-12
• /
• 2009

Seed priming is a useful technique for rapid and uniform seed germination as well as early seedling establishment. This experiment was conducted to find out the optimum condition for Sorbus alnifolia seed priming with four concentrations of four reagents in germination property and seedling growth performance. The results are summarized as follows: Percent germination (PG) varied 2.67% to 24.67%, and S. alnifolia seeds had the highest PG in the treatment that were primed in 100mM $KNO_3$ solution for 2 days. Mean germination time was the shortest in 200 mM $KNO_3$ solution for 2 days. Seed priming with $KNO_3$ solutions increased germination speed (GS) and germination performance index (GPI) compared with non-primed seeds. Especially seed primed with 100 mM $KNO_3$ solution for 2 days showed the highest GS and GPI. The highest relative growth rate (RGR) and seedling vigor index (SVI) was significantly (p<0.05) different from the control and other treatments, respectively. RGR of height (0.0071) and root collar diameter (0.0141) of seedling from primed seeds were the highest in 400 mM NaCl solution for 2 days. The highest SVI (5.43) was observed in the seedlings from seeds primed in 100 mM $KNO_3$ solution for 2 days. Consequently, the optimum reagent and concentration were $KNO_3$ and 100 mM for the effective germination and seedling growth in S. alnifolia

• Food Science and Preservation
• /
• v.8 no.3
• /
• pp.286-290
• /
• 2001

Ginger was stored in the 0.05mm and 0.08mm of PE film bags and the styrofoam box. During the ginger storage, weight losses in the PE film bags were effectively supressed than in the control bag, and storage was better in the 0.08mm PE film bag while the spoilage of ginger was higher than in 0.05mm bag. The effective storage temperature was 10$^{\circ}C$ at which was no scouting during the storage. And the perforation in the PE film bag helped the healthy ginger ratio. Single perforation of 6an diameter was good for 0.05mm film and three for 0.08mm film. When CO$_2$absorbent was added into the film bag, the spoilage and mold occurence was lowered. In the styrofoam box, the healthy ginger ratio also increased by incorporating the absorbents, but there were no great differences between activated charcoal and calcium hydroxide.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.12
• /
• pp.1380-1393
• /
• 2010

This paper presents a design, fabrication and the test results of planar active electronically scanned array(AESA) radar prototype for airborne fighter applications using transmit/receive(T/R) module hybrid technology. LIG Nex1 developed a AESA radar prototype to obtain key technologies for airborne fighter's radar. The AESA radar prototype consists of a radiating array, T/R modules, a RF manifold, distributed power supplies, beam controllers, compact receivers with ADC(Analog-to-Digital Converter), a liquid-cooling unit, and an appropriate structure. The AESA antenna has a 590 mm-diameter, active-element area capable of containing 536 T/R modules. Each module is located to provide a triangle grid with $14.7\;mm{\times}19.5\;mm$ spacing among T/R modules. The array dissipates 1,554 watts, with a DC input of 2,310 watts when operated at the maximum transmit duty factor. The AESA radar prototype was tested on near-field chamber and the results become equal in expected beam pattern, providing the accurate and flexible control of antenna beam steering and beam shaping.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.1
• /
• pp.71-83
• /
• 2001

The purpose of this study was to compare the effects of various surface treatments by measuring removal torque on bone healing around titanium implants. 40 Screw-shaped cp titanium implants with length of 4mm, outer diameter of 3.75mm, and pitch-height of 0.5mm were used Group 1 was left as machined(control), Group 2 was blasted with $50{\mu}m\;Al_2O_3$, group 3 was blasted and etched in etching solution($NH_4OH : H_2O_2:H_2O= 1 : 1 : 5$) at $90^{\circ}C$ for 1 minute group 4 was blasted and oxidated under pure oxygen at $800^{\circ}C$. The implant surface roughness was analyzed with SEM and CLSM(Confocal Laser Scanning Microscope) and implants were placed in proximal tibial metaphysis of 10 New Zealand White rabbits. After 3 months of healing period, removal torque of each implant was measured to compare bone healing around implant. The results obtained were as follows 1. In SEM view, blasting increased the roughness of the surface, but etching of that rough surface decreased the roughness due to the removal of the tip of the peak. Oxidation also decreased the roughness due to formation of needle-like oxide grains on the implant surface. 2. The Sa value from CLSM was least in the machined group($0.47{\mu}m$), greatest in blasted group($1.25{\mu}m$), and the value decreased after etching($0.91{\mu}m$) and oxidation($0.94{\mu}m$). 3. The removal torque of etched group(24.5Ncm) was greater than that of machined group(16.7Ncm) (P<0.05), and was greatest in the oxidated group(40.3Ncm) and the blasted group(34.7Ncm).

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.3
• /
• pp.260-272
• /
• 2001

All-ceramic restorations have had a more limited life expectancy than metal ceramic restorations because of their low strength. Their relatively lower strength and resistance to fracture have restricted the use of all-ceramic crowns to anterior applications where occlusal loads are lower. But there has been increasing interest in all-ceramic restorations because patients are primarily concerned with improved esthetics. Many efforts have been made to in prove the mechanical properties of dental ceramics. This study was designed to elucidate the influence of the luting agent on the strength of the Empress 2 crown (staining technique) cemented on human teeth. Seventy extracted human permanent molar teeth were chosen. Teeth were prepared for Empress 2 crowns with milling machine on a surveyor. A dental bur was placed in the mandrel that was positioned so that the long axis of the bur was perpendicular to the surveyor base. Dimensions of the Empress 2 crown preparation were $6^{\circ}$ taper on each side, $1.5{\pm}0.1mm$ shoulder margin, and 4mm crown height. The luting cements used in this study were as follow: 1. Uncemented 2. Zinc phosphate cements (Confi-Dental) 3. Conventional glass ionomer cement : Fuji 1 (GC) 4. Resin-modified glass ionomer cements : Fuji plus (GC) 5. Adhesive cements : Panavia F (Kuralay), Variolink II (Vivadent), Choice (Bisco). Fracture test using Instron. The crowns were loaded in compressive force to evaluate the effect of these cements on the breaking strength of these all-ceramic crowns. A steel ball with a diameter of 4mm was placed on the occlusal surface and load was applied to the steel ball by a cylindrical bolt with a crosshead speed of 0.5mm per minute until fracture occurred. The fractured surface was examined using Scanning Electron Microscopic Image (SEM) to discover the correlation between fracture strength and bonding capacity. Within the limitation of this in vitro study design, the results were as follows : 1. fomentations significantly increased the fracture resistance of Empress ceramic crowns compared to control. Uncemented (206.9 N): ZPC (812.9 N): Fuji 1 (879.5 N): Fuji Plus (937.7 N): Choice (1105.4 N): Variolink II (1221.1 N): Panavia F (1445.2 N). 2. Resin luting agent, treated by a silane bond enhancing agents, yielded a significant increase in fracture resistance. In some of the Panavia F group, a fracture extended into dentin. 3. According to SEM images of fractured Empress crowns, the stronger the bond at both interfaces(crown and die), the more fracture strength was acquired.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.3
• /
• pp.362-374
• /
• 2007

Statement of problem. The intial stability for osseointegration of implant has been an interesting factor. Especially, in the case of poor bone quality or immediately loaded implant, various strategies have been developed focusing on the surface of materials to improve implant fixation to bone. The microscopic properties of implant surfaces play a major role in the osseous healing of dental implants. Purpose. The aims of this study are to perform a histologic and histomorphometric comparison of the healing characteristics of three different surfaces and the comparison of resonance frequency analysis (RFA) values measured by $Osstell^{TM}$ and perio-test values (PTV) measured by Periotest. Material and methods. A total of 24 screw titanium implants (Dentium Co., Seoul, Korea) with 6mm in length and 3.4mm in diameter, were placed in the mandible of 4 beagle dogs. Implants were divided into three groups following the surface treatment methods: Group I is machined(control group). Group II is anodically oxidized. Group III is coated 500nm in thickness with hydroxyapatite(HA) by ion beam assisted deposition(IBAD) on the anodized oxidization. Bone blocks from 2 dogs were caught after 3 weeks of covered healing and another blocks from 2 dogs after 6 weeks. RFA values and PTV were measured right after insertion and at 3 and 6weeks. Histomorphometric analysis was made with Kappa Image Base System to calculate bone-to-implant contact (BIC) and bone area inside the threads. Pearson's correlation analyses were performed to evaluate the correlation between RFA and PTV, BIC and bone area ratio of three different surfaces at 3 and 6 weeks. Results. 1) In all surface treatment methods, the RFA values decreased and the PTV values increased until 6 weeks in comparison to initial values. 2) At 3 weeks, no significant difference was found from bone-to-implant contact ratio and bone area ratio of three different surface treatment methods(P>0.05). However, at 6 weeks, different surface treatment methods showed significantly different bone-toimplant contact ratio and bone area ratio(P<0.05). 3) In the implants with the IBAD on the anodic oxidization, significant difference was found between the 3 weeks and the 6 weeks bone area ratio(P<0.05). 4) Correlation was found between the RFA values and the bone area ratio at 3 and 6 weeks with significant difference(P<0.05). Conclusions. These results indicate that the implants with the IBAD on the anodic oxidization may have a high influence on the initial stability of implant.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.4
• /
• pp.660-666
• /
• 2003

The purpose of this study was to investigate the inhibitory effect of Er:YAG laser against the intraoral acid producing bacterium of S. mutans. Bacterial pellet containing S. mutans KCTC 3065 was irradiated by Er:YAG laser having a $650\;{\mu}m$ diameter beam by non-contact mode. Irradiated parameters were 50mJ, 10Hz and exposure time were 1s, 3s, 5s, 7s, 9s respectively. We obtained the following results of relative growth rate and acid-producing ability of S. mutans by culturing for 48hrs. 1. The growth rate of S. mutans was decreased in the group of laser irradiation compared to the control group(P<0.01). 2. The growth rate at laser irradiation group of 7s, 9s irradiation time was decreased significantly compared to the laser irradiation group of 1s, 3s, 5s irradiation time, until 12 hours(P<0.05). After 24 hours, all groups of laser irradiation were not found to be statistically different in each other. 3. The acid-producing ability of S. mutans was inhibited for a certain duration by irradiation of laser. In summary, the growth rate and acid producing ability of S. mutans decreased according to laser irradiation. This effect was directly related to the amount of irradiation time. These results suggested that Er:YAG laser had an growth inhibition effect on S. mutans.

• Journal of Korean Society of Forest Science
• /
• v.95 no.6
• /
• pp.751-758
• /
• 2006

To investigate soil management practices for increasing tree growth in arid regions of China, Xinjiang poplar (Populus alba var. pyramidalis) seedlings were planted in a nursery and windbreak and were treated with fertilizers (nitrogen and phosphorus) and absorbents (artificial; K-SAM and natural: Yuho (Artemisia ordosica)) at Dengkou in Inner Mongolia. Seedling height, diameter at breast height (DBH), biomass, and nitrogen (N) and phosphorus (P) concentrations were measured 1.5 years after the treatments. Soil texture was sandy loam for nursery and clay loam for windbreak, soil pH was 8.78 for nursery and 8.51 for windbreak, and total soil N concentration was 0.06% for nursey and 0.08% for windbreak. [n general, seedling height and DBH increased in the N fertilizer treatment compared to control or other treatments both in nursery and windbreak. Also seedling growth increased after the treatments of artificial and natural absorbents in windbreak. Total above- and belowground biomass increased after the N + P treatment. Foliage N and P concentrations following N and/or P treatments were same in the nursey, however, they significantly increased in the windbreak indicating N deficiency. It appeared that N was a limiting factor for early growth of Xinjiang poplar seedlings and artificial and natural absorbents (K-SAM and Yuho) would be useful to increase seedling growth in the arid region.