• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.213-213
• /
• 2000

This study was performed to investigate types and formation mechanism of cracks in two Al alloy welds, A5083 and A7NO1 spot-welded by pulse Nd: YAG laser, using SEM, EPMA and Micro-XRD. In the weld zone, three types of crack were observed: center line crack($C_{C}$), diagonal crack($C_{D}$), and U shape crack($C_{U}$). Also, HAZ crack($C_{H}$), was observed in the HAZ region, furthermore, mixing crack($C_{M}$), consisting of diagonal crack and HAZ crack was observed.White film was formed at the hot crack region in the fractured surface after it was immersed to 10%NaOH water. In the case of A5083 alloy, white films in C crack and $C_D crack region were composed of low melting phases, Fe₂Si$Al_8$ and eutectic phases, Mg₂Al₃ and Mg₂Si. Such films observed near HAZ crack were also consist of eutectic Mg₂Al₃. In the case of A7N01 alloy, eutectic phases of CuAl₂, $Mg_{32}$ (Al,Zn) ₃, MgZn₂, Al₂CuMg and Mg₂Si were observed in the whitely etched films near $C_{C}$ crack and $C_{D}$ crack regions. The formation of liquid films was due to the segregation of Mg, Si, Fe in the case of A5083 alloy and Zn, Mg, Cu, Si in the case of A7N01 aooly, respectively.The $C_{D}$ and $C_{C}$ cracks were regarded as a result of the occurrence of tensile strain during the welding process. The formation of $C_{M}$ crack is likely to be due to the presence of liquid film at the grain boundary near the fusion line in the base metal as well as in the weld fusion zone during solidification. The $C_{U}$ crack is considered a result of the collapsed keyhole through incomplete closure during rapid solidification. (Received October 7, 1999)

• 한국컴퓨터산업학회논문지
• /
• 제8권2호
• /
• pp.103-106
• /
• 2007

동영상 데이터베이스 시스템을 구축하려면 동영상의 샷 경계 검출이 먼저 이루어져야 한다. 그러나 이 과정이 자동화되지 않아 많은 시간과 노력이 필요하다. 샷 경계 검출 알고리즘은 많이 연구되고 있으나 영상 편집시 사용된 편집 효과의 발전에 의하여 완벽한 검출은 매우 어려운 실정이다. 따라서 정확한 샷 경계를 얻기 위해서는 수작업에 의한 검증과 수정이 꼭 필요하다. 시공간 슬라이스는 영상의 내용 변화를 요약한 한 장의 이미지이다. 편집 효과는 수직선, 사선, 곡선, 점진적 색상의 변화 등 시각적으로 인지 가능한 형태로 시공간 슬라이스에 표현된다. 따라서 영상을 재생시키지 않고도 시공간 슬라이스의 변화만으로 샷 경계를 쉽고 빠르게 찾아낼 수 있다. 이 논문에서 제안하고 구현한 시스템은 시공간 슬라이스 상에서 오검출 키 프레임을 삭제할 수 있으며 미검출 된 키 프레임을 생성할 수 있도록 하였다.

• 한국의상디자인학회지
• /
• 제23권1호
• /
• pp.129-142
• /
• 2021

This study aims to identify the perception of New-Hanbok one-piece dresses that female consumers have purchased and to analyze the design preference based on design types and brands. Analysis was conducted on New-Hanbok brand websites, and additional research was carried out through a survey of 402 women in their 20s and older. The survey consisted of 36 questions, which were divided into categories including pattern, color, material, and recognition of the one-piece dress. The research results are as follows. First, the preferred design form of the New-Hanbok one-piece dress was long length, medium fit, princess line, round git, rectangular git, regular width git, V neckline, regular width dongjeong, front closing with a wide overlap of the chest are a, narrow goreum, a skirt part with moderate crease spacing and number of pleats, A-line skirt silhouette, long and narrow sleeves, diagonal shoulder line, and a cuff at the end of each sleeve. Second, the preferred colors of the New-Hanbok one-piece dress were bright, neutral, or light and were predominately monochromatic Third, the preferred fabric conveyed a contemporary atmosphere through its print pattern. The most favored fabric material was cotton. Through this study, more systematic design development research should be carried out focusing on the current situation and identifying problems, thereby improving traditional culture.

• 한국CDE학회논문집
• /
• 제9권2호
• /
• pp.93-101
• /
• 2004

In mechanical design, optimization procedures have mostly been implemented solely by CAE codes combined by optimization routine, in which the model is built, analyzed and optimized. In the complex geometries, however, CAD is indispensable tool for the efficient and accurate modeling. This paper presents a method to carry out optimization, in which CAD and CAE are used for modeling and analysis respectively and integrated in an optimization routine. Application Programming Interface (API) function is exploited to automate CAD modeling, which enables direct access to CAD. The advantage of this method is that the user can create very complex object in Parametric and automated way, which is impossible in CAE codes. Unigraphics and ANSYS are adopted as CAD and CAE tools. In ANSYS, automated analysis is done using codes made by a script language, APDL(ANSYS Parametric Design Language). Optimization is conducted by VisualDOC and IDESIGN respectively. As an illustrative example, a mold design problem is studied, which is to minimize temperature deviation over a diagonal line of the surface of the mold in contact with hot glass.

• Structural Engineering and Mechanics
• /
• 제75권3호
• /
• pp.389-399
• /
• 2020

An infill wall made of high-performance fiber-reinforced cementitious composites (HPFRCC) was utilized in this study to strengthen the reinforced concrete (RC) frame structures that had not been designed for seismic loads. The seismic performance of the RC frame structures strengthened by the HPFRCC infill walls was investigated through the experimental tests, and the test results showed that they have improved strength and deformation capabilities compared to that strengthened by the RC infill wall. A simple numerical modeling method, called the modified longitudinal and diagonal line element model (LDLEM), was introduced to consider the seismic strengthening effect of the infill walls, in which a section aggregator approach was also utilized to reflect the effect of shear in the column members of the RC frames. The proposed model showed accurate estimations on the strength, stiffness, and failure modes of the test specimens strengthened by the infill walls with and without fibers.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.866-869
• /
• 2004

A carbon nanotube field emission display(CNT FED) panel with a 2 inch diagonal size was fabricated by using a screen printing of a prepared photo-sensitive CNT paste and vacuum in-line sealing technology. After a surface treatment of the patterned CNT, only the carbon nanotube tips are uniformly exposed on the surface. The diameter of the exposed CNTs are usually about 20nm. The sealing temperature of the panel was around 390 $^{\circ}C$ and the vacuum level was obtained with $1.4{\times}10^{-5}$torr at the sealing. The field emission properties of the diode type CNT FED panel were characterized Now, we are developing a triode type CNT FED with a self-aligned gate-emitter structure.

• 복식
• /
• 제56권7호
• /
• pp.152-166
• /
• 2006

The purpose of this study was to make patterns for lingerie look after examining expressive characteristics and constructive elements of lingerie look. As underwear became outerwear, position of wearing, materials, and details had changed, and the phenomenon to expose one's body has increased. The constructive elements found in the lingerie look were classified into silhouette, fastening, dart, and cutting line. Many of corset looks revealed cutting lines such as diagonal, perpendicular, and horizon. Brassiere look used perpendicular rutting lines or horizontal cutting lines passing through the bust point in order to highlight the volume by adding darts. There were styles Of chemise looks that used princess lines or separately added a brassier on the breast. Based on the examination of the elements, a total of four apparel works were created, including one flat pattern and three draping patterns. With new infra-apparel designs and patterns, this study was able to artificially highlight the body and express the beauty of costume through revelation of body. In addition, it explored the possibility that the phenomenon that underwear becomes outerwear may be a new idea of dress designing.

• 한국전기전자재료학회논문지
• /
• 제24권5호
• /
• pp.374-380
• /
• 2011

In this paper a printing process for patterning electrodes on large area substrate was developed by combining screen printing with reverse off-set printing. Ag ink was uniformly coated by screen printing. And then etching resist (ER) was patterned in the Ag film by reverse off-set printing, and then the non-desired Ag film was etched off by etchant. Finally, the ER was stripped-off to obtain the final Ag patterns. We extracted the suitable conditions of reverse Using the process we successfully fabricated gate electrodes and scan bus lines of OTFT-backplane used for e-paper, in which the diagonal size was 6 inch, the resolution $320{\times}240$, the minimum line width 30 um, and sheet resistance 1 ${\Omega}/{\Box}$.

• 전기학회논문지P
• /
• 제63권3호
• /
• pp.200-205
• /
• 2014

In this paper, 5.8GHz band $4{\times}4$ Butler matrix is designed using easily accessible commercial $90^{\circ}$ hybrid coupler and semirigid coaxial cable as a transmission line. This Butler matrix is very flexible to changes of antenna system specification like a frequency band because $90^{\circ}$ hybrid coupler changing is all to do. The result of design is the distance of $2{\times}2$ array antenna element is $\sqrt{2}{\lambda}/4$, the 4 beam directions are diagonal of array antenna and phase shifter is not necessary. The beam width is roughly $25^{\circ}$ narrower because of array antenna geometry and the side lobe is about 10dB higher partially than theoretical beam pattern. But the overall beam pattern is similar with theoretical beam. This Butler matrix can be applied to switching beam antenna of 5.8GHz band Wi-Fi and WAVE system.

• 로봇학회논문지
• /
• 제5권4호
• /
• pp.359-366
• /
• 2010

This study proposes the design method for the robot rotation arm which the end effector that is connected in end of the arm keeps parallel motion even though the robot arm rotates. So far, most robot arm rotates together the end effector when the arm rotates. For this, this study proposes the mechanism that the arm is linked to each 4 parallel link so that rotation is possible by 4 pins, and the rotation arm connects 2 joints of diagonal line direction to a link in each 4 joint for rotation, and designs so that can change length of the link. For verification of design, this study targeted that develop the rotation arm for medical examination that use in ophthalmology. It is important that a medical robot offers comport to patient and design compactly so that medical examination and treatment space may can be defined enough. It is designed so that all drive elements may be positioned on interior of the arm and optimization of design for main parts was carried out in this study for this. The robot arm which is developed in this study manufactured to use by medical phoropter arm, and got good result by an experiment. The robot rotation arm which is proposed in this study is judged to contribute very effectively in case use of a medical robot arm for medical examination and treatment, also the robot arm which the end effector that is connected in the end of the arm needs to keep parallel motion. And, the robot arm which is developed in this study made an application as license.