• 한국인쇄학회지
• /
• 제19권2호
• /
• pp.58-67
• /
• 2001

Gamut mapping is a technique that acts on cross-media color reproduction to transform a color between devices for the purpose of enhancing the appearance or preserving the appearance of an image. Gamut mapping essentially produces color conversion error which depends the gamut mapping method, source and destination devices, and sample points for gamut modeling. For color space conversion between monitor colors and printer colors, empirical representation using sample measurements is currently widely utilized. Color samples are uniformly selected in the device space such as CMY or RGB, represented as color patches, and then measured. However, in the case of printer, these color samples are not evenly distributed inside the printer gamut and the color conversion error is increased. Accordingly, this paper introduces a equally distributed color sampling method in CIELAB space, a device- independent color space, to reduce color conversion error, and the performance is analyzed via color space conversion experiments using tetrahedral interpolation.

• 한국광학회지
• /
• 제12권1호
• /
• pp.40-47
• /
• 2001

초고속 디지털 광통신용 $1.55{\mu}m$ InGaAsP/InGaAsP MQW 광흡수 변조기에서 각종 구조변수들이 광흡수변조기 성능에 미치는 영향을 체계적으로 조사분석하였다. 일반적으로 행하여지는 양자우물 수 $N_w$, 양자우물 두께 $t_w$, detuning 양 $\Delta\lambda$, 소자길이 L과 같은 구조 파라미터들에 더불어 본 연구에서 새롭게 제안한 SCH 영역내에 n형으로 도핑된 길이 $t_n$가 소자 성능에 미치는 영향을 해석하였다 이를 통해 소자길이 L=$100{\mu}m$의 광흡수변조기에서 구동 전압 $V_{\alpha}$=0~-2V 영역에서 동작하고 기초흡수 -1.5dB 이하, -1V에서 -2.92dB 및 -2V에서 -10.0dB 이상의 소광비를 주는 우수한 성능을 갖는 초고속 광흡수 변조기 설계가 가능하였다.

• 한국인터넷방송통신학회논문지
• /
• 제10권4호
• /
• pp.83-90
• /
• 2010

본 논문에서는 촉감 처리기술의 특징인 VR기술과 햅틱디바이스인 Omni를 이용하여 VR공간에서 멀티 터치 포인터에 어류객체의 촉감을 제시하는 모델을 제안하고 가능성을 실험하였다. 본 실험을 위하여 Matlab/Simulink와 Handshake사의 proSENSE Virtual Touch Toolbox을 프로그래밍 툴로 사용하였고, 3D로 모델링 된 물고기 객체들의 자연스런 움직임을 묘사하기 위해 x, y, z축 각각의 움직임을 표현하는데 필요한 함수들을 사용하였다. 이러한 움직임들은 2명의 사용자가 각각 제어하는 멀티 포인트에 사실적인 물리 작용을 제공한다. 실험결과 3D 객체의 외형을 촉감만으로 인지하는 것과 숨 쉬는 상태를 촉감으로 느낄 수 있게 하는 것이 잘 표현되었고, 두 개의 멀티 포인터를 활용함으로 VR공간에서의 다중참여를 통한 게임이나 콘텐츠 개발이 가능함을 확인할 수 있었다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권3호
• /
• pp.164-168
• /
• 2016

A low insertion-loss, high-isolation switch based on single pole double throw (SPDT) for a 2.4GHz Bluetooth low-energy transceiver is presented in this paper. In order to increase isolation, the body floating technique is implemented. Based on characteristics whereby the ratio of the sizes of the shunt and the series transistors significantly affect the performance of the switches, the device sizes are optimized. A simple matching network is also designed to enhance the insertion loss. Thus, the SPDT switch has high isolation and low insertion loss without increasing the complexity of the circuit. The proposed SPDT is designed and simulated in a complementary metal-oxide semiconductor 65nm process. The switch has a $530{\mu}m{\times}270{\mu}m$ area and achieves 0.9dB, 1.78dB insertion loss and 40dB, 41dB isolation of transmission, reception modes, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권7호
• /
• pp.2972-2991
• /
• 2016

WLAN is the best choice in the place where complex network is hard to set up. Intelligent terminals are more and more assembled in some areas now. However, according to IEEE 802.11n/802.11ac, the access-point (AP) can only serve one user at a single frequency channel. The spectrum efficiency urgently needs to be improved. In theory, AP with multi-antenna can serve multiple users if these users do not interfere with each other. In this paper, we propose a user clustering scheme that could achieve multi-user selection through the mutual cooperation among users. We focus on two points, one is to achieve multi-user communication with multiple antennas technique at a single frequency channel, and the other one is to use a way of distributed users' collaboration to determine the multi-user selection for user clustering. Firstly, we use the CSMA/CA protocol to select the first user, and then we set this user as a source node using users' cooperation to search other proper users. With the help of the users' broadcast cooperation, we can search and select other appropriate user (while the number of access users is limited by the number of antennas in AP) to access AP with the first user simultaneously. In the network node searching, we propose a maximum degree energy routing searching algorithm, which uses the shortest time and traverses as many users as possible. We carried out the necessary analysis and simulation to prove the feasibility of the scheme. We hope this work may provide a new idea for the solution of the multiple access problem.

• Transactions on Electrical and Electronic Materials
• /
• 제14권3호
• /
• pp.116-120
• /
• 2013

This paper proposes a novel RF MEMS dc-contact switch with stiff membrane on a quartz substrate. The uniqueness of this work lies in the utilization of a seesaw mechanism to restore the movable part to its rest position. The switching action is done by using separate pull-down and pull-up electrodes, and hence operation of the switch does not rely on the elastic recovery force of the membrane. One of the main problems faced by electrostatically actuated MEMS switches is the high operational voltages, which results from bending of the membrane, due to internal stress gradient. This is resolved by using a stiff and thick membrane. This membrane consists of flexible meanders, for easy movement between the two states. The device operates with an actuation voltage of 6.43 V, an insertion loss of -0.047 dB and isolation of -51.82 dB at 2 GHz.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1067-1074
• /
• 2022

An architect creates his/her design to meet owner's requirements. Floor plans, perspective drawings, and scale models are used in order for the owner to choose the design. The tools are a little helpful for communication between the architect and the owner in case the owner does not know architecture. The scale models are good, but it is hard to make scale models while design is in progress. 3D CAD is a good tool for communication, but it is time-consuming and requires high-performance computer hardware. Augmented reality is able to show 3D virtual models that are updated by the architect with smart devices such as a smart phone and a tablet PC. The owner frequently reviews the updated design anytime anywhere. This study proposes a method to use augmented reality for architectural design and construction management. The method supports the communication between the owner, the architect and the contractor to review updated designs, and to complete the building project. 3D models expressed in augmented reality are created using SketchUp with 2D drawings for building construction. An Android application implementing augmented reality is developed by Qualcomm Vuforia and Unity on smart devices. Drawings as markers and 3D models are connected in Unity. And functions that temporarily hide unnecessary parts can be implemented in C# programming language. If an owner, an architect, or a contractor looks at a smart phone on a 2D drawing, he/she can identify building elements such as 3D buildings or columns on a screen. This can help communication between them.

• 대한전자공학회논문지SD
• /
• 제40권3호
• /
• pp.1-9
• /
• 2003

본 연구에서는 1-단자 표면탄성파 공진기를 적용한 사다리형 구조 필터에 대한 전극 두께, 공진기의 반사기 하중 및 정적 정전용량비에 따른 주파수 응답특성의 고찰이 이루어졌으며, 최적화된 매개변수를 이용하여 송신 및 수신단용 RF 필터를 제작하였다. 제작된 필터는 800㎒ 대역 이동통신 시스템에 적용 가능하며, 외부회로에 의한 임피던스 정합이 필요하지 않다. 36°LiTaO₃ 압전기판 위에 Al-Cu(W 3%) 전극을 형성하여 제작하였으며, 3.8㎜×3.8㎜×1.5㎜세라믹 패키지에 실장되었다. 통과대역(25 ㎒)에서의 최소 삽입손실은 2.3 dB, 3-dB 대역폭은 약 33 ㎒, 통과대역 리플은 0.5 dB 미만이며, 약 30 dB 이상의 저지대역 감쇄를 확보할 수 있었다. 또한, 제작된 RF 필터의 내전력성 및 온도 변화에 따른 주파수 응답특성 실험을 통해 약 3.5 W의 내전력성과 -20℃∼80℃에서 최대 0.09 dB/℃의 3-dB 삽입손실 변화를 측정할 수 있었다.

• 한국전자통신학회논문지
• /
• 제7권4호
• /
• pp.867-871
• /
• 2012

본 논문에서는 폴리머 테이퍼링 도파로 영역을 포함하는 $1{\times}4$ 형태의 플라스틱 광섬유 커플러를 제안하고 구현하였다. 플라스틱 광섬유와 폴리머 사각 도파로의 접속면에서 광 누설 손실을 줄이기 위해 단면이 원형에서 구형으로 천천히 바뀐 플라스틱 광섬유를 도입하였다. 실리콘 고무로 만들어진 주형을 이용하여 소자를 제작하였다. 제작된 소자는 1.33 dB의 삽입손실과 2.2 dB의 평탄도를 보였다.

• 전기전자학회논문지
• /
• 제17권2호
• /
• pp.129-134
• /
• 2013

For the conventional power metal-oxide semiconductor field-effect transistor (MOSFET) device structure, there exists a tradeoff relationship between specific on-resistance ($R_{ON.SP}$) and breakdown voltage ($V_{BR}$). In order to overcome the tradeoff relationship, a uniform super-junction (SJ) trench metal-oxide semiconductor field-effect transistor (TMOSFET) structure is studied and designed. The structure modeling considering doping concentrations is performed, and the distributions at breakdown voltages and the electric fields in a SJ TMOSFET are analyzed. The simulations are successfully optimized by the using of the SILVACO TCAD 2D device simulator, Atlas. In this paper, the specific on-resistance of the SJ TMOSFET is successfully obtained 0.96 $m{\Omega}{\cdot}cm^2$, which is of lesser value than the required one of 1.2 $m{\Omega}{\cdot}cm^2$ at the class of 100 V and 100 A for BLDC motor.