• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.4
• /
• pp.102-106
• /
• 2002

Development of high speed feed drive system has been a major issue for the past few decades in machine tool industries. The reduction of the tool change time as well as rapid travel time can enhance the productivity. However, the high speed feed drive system generates more heat in nature, which leads thermal expansion that has adverse effects on the accuracy of machined parts. The detail of the model proposed is described in the paper together with the experimental methodologies using a proposed compact measurement system to examine the validity of the proposed approach. The results showed the machining accuracy could be maintained to better than $\pm$ 5$\mu\textrm{m}$ while using this sensor.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.24-30
• /
• 1999

In the automobile development, press tool design and manufacturing are very difficult and need high cost experienced workers. Therefore, we concerned ourselves in the cost down and easy manufacturing. In this research, we have developed a tool for LH/RH of the front fender, which had difficulty in forming. We have carried out the drawing analysis by Pam-stamp and CATIA modeling. Finally, we get the optimal design parameter. As a result of try out, we found out the optimal width and margin at the center line for tool design. Also, in order to get good results we have to intaglio margin in the part of the wheel house and utilize double bead on every side except corner.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.7
• /
• pp.739-745
• /
• 2014

In this paper, an evaluation of intelligent CCTV system is proposed with recording and implementation video and video DB. Videos for evaluation are recorded by dividing far, mid and near zone. Video DB has video recording information, detection area, and ground truth in XML format. A video annotation tool is proposed to make ground truth effectively in this paper. A video annotation tool writes ground truths of videos and includes evaluation comparing system alarms with ground truths.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.2
• /
• pp.95-100
• /
• 2009

Recent advances in computer technology have brought more dependence on software to railway systems. Hence, the safety assurance of the vital software running on the railway system is very critical task and yet, not many works have been done. While much efforts have been reported to improve electronic hardware's safety, not so much systematic approaches to evaluate software's safety. In this paper, we suggested an automated analysis tool for S/W change impact in railway system, and presented its result of implementation. The analysis items in the implemented tool had referred to the international standards in relation to the software for railway system, such as IEC 61508 and IEC 62279. In these international standards, 'change impact analysis' for railway system S/W has to be required mandatorily. The proposed tool can be utilized at the assessment stage and also the software development stage.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1026-1030
• /
• 2007

A linear compressor used in a refrigerator has higher energy efficiency than a reciprocating compressor. But its vibration level is still severe than others. The vibration level of linear compressor at the frequency of 60Hz is dominant since it is the exciting frequency of a motor. Experimental approach to reduce the vibration needs much effort and long period. In this paper, simulation tool to predict the vibration of the shell of the linear compressor was developed. The piston, body and shell are assumed to be rigid, while the loop pipe is flexible. The results by the developed tool showed good agreements with those by experiments.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.947-951
• /
• 1995

Cim realization for the machinery manufacturing plant has several problems such as a lack of the adaptibity for system integration of the production machines, a lack of the flexibility for the information flow and a lack of the interchangeability fot the variety of the interchange information. In the paper the development of VMD for the object oriented machine tool in Cim enviroment is accomplised. FOr this purpose VMD is constructed in PC with NT 3.51/OS enviroment by using the exculsive comunication board and PLC for the conventional CNC machine tool that VMD support is not available. And also RS232 interface between VMD and CNC's and DNC 2 comunication board supplied by FANUC for two types of CNC are used. This developed VMD is very useful for CIM construction in the shop floor having the multi-vendor CNC controllers.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.2
• /
• pp.28-34
• /
• 2008

Recently, with the development of high speed machining technology for difficult-cutting materials, to improve the cutting performance of cutting tool, fine surface finish of complex shape tools using magnetic polishing technology is in high demand. This study is, therefore, discussed and compared the cutting characteristics of polished tools by the adopted various magnetic polishing moving types a point of view the cutting forces and the tool life. Moreover, the practicality of magnetic polished tools in the wide range cutting conditions is investigated. From obtained results, It is confirmed that the CW(clockwise) revolution and oscillation type as the polishing moving type is proper and magnetic polished tool shows the excellence in high cutting speed range.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.1
• /
• pp.7-16
• /
• 2012

One distinguishing feature of BIM(Building Information Modeling) is the objectification of spatial elements independently, which makes it easy to represent spatial network. From this perspective, this study aimed to develop the spatial network analysis tool based on open BIM technologies. From the literature review, an object model of spatial network with nodes and links and a process model from construction to visualization were established. A prototype system implementing the proposed models, named SNAT(Spatial Network Analysis Tool), was developed in Java platform with using its open source packages. SNAT can create a spatial network from IFC-BIM model, calculate the indices of spatial network analysis, and visualize it with the representing types(map, graph, matrix and table).

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.3
• /
• pp.17-23
• /
• 2016

In this paper, we propose a model of the collaborative authoring tool and its implementation results. In the 'collaborative authoring and automatic distribution system,' users can create eBooks by using partial works (primary and edited sources) on the basis of copyright information registered by the primary author. The Collaborative Authoring Tool is a part of "the collaborative authoring and automatic distribution system" developed through research on "the development of key technologies of social work protection and content mashup tools" as an R&D project granted by the Korea Copyright Commission from 2013. In the collaborative authoring and automatic distribution system, authors of primary sources such as images, audio clips and video clips for eBooks can register them together with the copyright information; users can edit the primary sources to produce secondary sources and in turn register the secondary sources on the system; and users can create and distribute eBooks by using the sources registered in the system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1141-1146
• /
• 2003

We have developed the three-dimensional simulation tool for the design of deflection yoke. This tool consists of a modeler, a solver and a post-processor. The modeler easily makes models of Deflection Yoke (DY) and ferrite core (Circle, RAC and RTC) by the parameters and supports several element types (line, surface and quadrilateral). The solver calculates charge density and magnetic field of DY by boundary element method (BEM). We can simply evaluate misconvergence, distortion and inductance of DY in the post-processor, so we apply this simulation tool to 32" rectangular deflection yoke. We can conveniently implement the efficient development of DY in the future.