Browse > Article

A Study on the Polishing Moving Type and the Cutting Characteristics of Magnetic Polished Tool  

Jung, Sung-Yong (창원대학교 기계공학과 대학원)
Yang, Sun-Cheul (㈜ 윈 트)
Jung, Yoon-Gyo (국립창원대학교 기계공학과)
Publication Information
Journal of the Korean Society for Precision Engineering / v.25, no.2, 2008 , pp. 28-34 More about this Journal
Abstract
Recently, with the development of high speed machining technology for difficult-cutting materials, to improve the cutting performance of cutting tool, fine surface finish of complex shape tools using magnetic polishing technology is in high demand. This study is, therefore, discussed and compared the cutting characteristics of polished tools by the adopted various magnetic polishing moving types a point of view the cutting forces and the tool life. Moreover, the practicality of magnetic polished tools in the wide range cutting conditions is investigated. From obtained results, It is confirmed that the CW(clockwise) revolution and oscillation type as the polishing moving type is proper and magnetic polished tool shows the excellence in high cutting speed range.
Keywords
Magnetic polishing; Cutting force; Surface roughness; Flank wear;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Yamaguchi, H. and Shinmura, T., 'Development of an Internal Magnetic Abrasive Finishing Process for Nonferromagnetic Complex Shaped Tubes,' International Journal of the JSME, Vol. 44, No. 1, pp. 275-281, 2001   DOI
2 Lee, S. J., Lim J. H. and Cho, D. W., 'EKF Localization and Mapping by Using Consistent Sonar Feature with Given Minimum Landmarks,' SICE-ICASE International Joint Conference, pp. 2606-2611, 2006
3 Cho, J. R., Yang, S. C. and Jung, Y. G., 'A Study on the Improvement of Performance for High Speed Cutting Tool using Magnetic Fluid Polishing Techinque,' Transaction of KSMTE, Vol. 15, No. 1, pp. 32-38, 2006   과학기술학회마을
4 Jha, S. and Jain, V. K., 'Modeling and simulation of surface roughness in magnetorheological abrasive flow(MRAFF)process,' Wear, Vol. 261, Issues 7-8, pp. 856-866, 2006   DOI   ScienceOn
5 Kim, J. D. and Choi, M. S., 'Development of the Magnetic-Electrolytic-Abrasive-Polishing(MEAP)(2nd),' Journal of the KSMTE, Vol. 4, No. 3, pp. 31-38, 1995
6 Nam, M. H., 'Performance Characteristics of Seat Damper Using MR Fluid,' Journal of the KSMTE, Vol. 9, No. 5, pp. 127-134, 2000
7 Wang, D., Shinmura, T. and Yamaguchi, H., Study of magnetic field assisted mechanochemical polishing process for inner surface of Si$_{3}$N$_{4}$ ceramic components Finishing characteristics under wet finishing using distilled water,' International Journal of Machine Tool & Manufacture, Vol. 44, Issue 14, pp. 1547-1553, 2004   DOI   ScienceOn
8 Wang, Y. and Hu, D., 'Study on the inner surface finishing of tubing by magnetic abrasive finishing,' International Journal of Machine Tool & Manufacture, Vol. 45, Issue 1, pp. 43-49, 2005   DOI   ScienceOn