• Journal of Animal Science and Technology
• /
• v.64 no.3
• /
• pp.564-573
• /
• 2022

In this study, considering the difficulties for all farms to convert farm styles to animal welfare-based housing, an experiment was performed to observe the changes in the behavior and welfare of sows when the slat floor was changed to a collective breeding ground. Twenty-eight sows used in this study were between the second and fifth parities to minimize the influence of parity. Using a flats floor cover, the flattening rates were treated as 0%, 20%, 30%, 40%, and 50%. Data collection was the behavior of sows visually observed using a camera (e.g., standing, lying, fighting and excessive biting behaviors, and abnormal behaviors) and the animal welfare level measured through field visits. Lying behavior was found to be higher (p < 0.01) as the flattening rate increased, and sows lying on the slatted cover also increased as the flattening rate increased (p < 0.01). Fighting behavior wasincreased when the flattening rate was increased to 20%, and chewing behavior was increased (p < 0.05) as the flattening rate increased. The animal welfare level of sows, 'good feeding', it was found that all treatment groups for body condition score and water were good at 100 (p < 0.05). 'Good housing' was the maximum value (100) in each treatment group. As the percentage of floor increased, the minimum good housing was increased from 78 in 0% flattening rate to 96 in 50% flattening rate. The maximum (100) 'good health' was achieved in the 0% and 20% flattening rates, and it was 98, 98, and 99 in the 30%, 50%, and 40% flattening rate, respectively. 'Appropriate behavior' score was significantly lower than that of other paremeters, but when the flattening ratio was 0% and 20%, the maximum and minimum values were 10. At 40% and 50%, the maximum values were 39 and 49, respectively, and the minimum values were analyzed as 19 for both 40% and 50%. These results will be used as basic data about sow welfare for farmers to successfully transition to group housing and flat floors.

• Journal of Embryo Transfer
• /
• v.13 no.2
• /
• pp.173-178
• /
• 1998

The objective of this study was to evaluate the embryonic development ability and the appearance of blastocysts of bovine in vitro fertilized oocytes cultured in different culture media, and also to evaluate survival rate after thawing of frozen embryos by using 1.5 or 1.8M ethylene glycol(EG) with sucrose or trehalose. Fertilized oocytes were divided into three groups; i ) monolayer of cumulus /granulosa cell prepared by TGM 199+5% calf serum(TGM199), ii)GRlaa+5% CS, iii)SOF+5% CS, and they were cultured after insemination for 9 days, at 39˚C, under 5% $CO_2$ in air, but SOF+5% CS was cultured at 39˚C, under 5% 02, 5% GO2, 99% N2. Blastocysts derived from GRlaa + 5% CS on day 7~8 after insemination were frozen by using 1.5M EG or 1.8M EG with/without 0.2M sucrose or O.1M trehalose. The development rate of blastocysts on day 7 after insemination in SOF+5% CS was significant higher than in TCM199 or CR1aa(P<0.05). The appearance rate of blastocysts on day 7-8 after insemination was higher than in TCM199, when fertilized oocytes were cultured in GRlas or SOF. The survival rate of frozen blastocysts after thawing tended to increase, when blastocysts were frozen by using 1.8M EG with 0.2M sucrose or O.1M trehalose. These results indicated that SOF or CRlaa media with amino acids was superior to TCM199 with monolayer in terms of blastocyst development in culturing of in vitro fertilized bovine nocytes, and sucrose or trehalose was supposed to prevent embryos from the freezing shock.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.5
• /
• pp.565-570
• /
• 2013

Physiological studies on the salinity tolerance with respect to survival rate and body composition changes of the abalone Haliotis discus hannai were conducted by rapidly changing the salinity in an indoor rearing system. The survival rate of the control (35 psu), 30 and 25 psu groups at $15^{\circ}C$ was 100%. The survival rate of the 20 psu group was $35{\pm}5.0%$. Survival rate of the 15 psu group was 0%. At $15^{\circ}C$ and 35, 30, 25, 20, 15 psu, the moisture contents of abalone muscle were $82.1{\pm}0.7$, $82.5{\pm}0.7$, $84.9{\pm}0.5$, $86.9{\pm}0.3$ and $86.6{\pm}0.4%$, respectively. Crude lipid contents were $0.47{\pm}0.03$, $0.47{\pm}0.03$, $0.47{\pm}0.09$, $0.77{\pm}0.09$ and $0.63{\pm}0.03%$, respectively and crude ash contents were $1.30{\pm}0.12$, $1.33{\pm}0.15$, $1.13{\pm}0.23$, $1.87{\pm}0.15$ and $1.40{\pm}0.31%$, respectively. At salinity below 20 psu, these values increased compared with the control. The general components of abalone muscles significantly increased below 20 psu, while amino acid composition showed no significant difference with salinity and water temperature.

• KDI Journal of Economic Policy
• /
• v.44 no.3
• /
• pp.1-26
• /
• 2022

This paper analyzes the effects of the cut in the legal maximum interest rate (from 27.4% to 24%) that occurred in February of 2018 on loan interest rates, the default rates, and the loan approval rate of borrowers in the non-banking sector. We use the difference-in-difference identification strategy to estimate the effect of the cut in the legal maximum interest rate using micro-level data from a major credit-rating company. The legal maximum rate cut significantly lowers the loan interest rate and default rate of low-credit borrowers (i.e., high-credit-risk borrowers) in the non-banking sector. However, this effect is limited to borrowers who have not been excluded from the market despite the legal maximum interest rate cut. The loan approval rate of low-credit borrowers decreased significantly after the legal maximum interest rate cut. Meanwhile, the loan approval rate of high-credit and medium-credit (i.e., low credit risk and medium credit risk) borrowers increased. This implies that financial institutions in the non-banking sector should reduce the loan supply to low-credit borrowers who are no longer profitable while increasing the loan supply to high- and medium-credit borrowers.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.2
• /
• pp.116-121
• /
• 1992

The optimal extrusion process for the rate sensitive materials have been developed in this study. The preliminary designs of the die shapes have been carried out to maintain constant strain rate during extrusion and the upper bound approach has been applied to define the process variables (the die entrance velocity and the die length) including the rheology during deformation. The result for the axisymmetric extrusion process has been verified with rigid-viscoplastic finite element analysis. It has been confirmed that the optimal die has wider band of constant strain rate than the conical one does.

• Journal of Mechanical Science and Technology
• /
• v.16 no.6
• /
• pp.829-838
• /
• 2002

A constant volume combustion chamber is used to investigate the flame kernel development of gasoline air mixtures under various ignition systems, ignition energies and spark plugs. Three kinds of ignition systems are designed and assembled, and the ignition energy is controlled by the variation of the dwell time. Several kinds of spark plugs are also tested. The velocity of flame propagation is measured by a laser deflection method, and the combustion pressure is analyzed by the heat release rate and the mass fraction burnt. The results represent that as the ignition energy is increased by enlarging either dwell time or spark plug gap, the heat release rate and the mass fraction burnt are increased. The electrodes materials and shapes influence the flame kernel development by changing he transfer efficiency of electrical energy to chemical energy. The diameter of electrodes also influences the heat release rate and the burnt mass fraction.

• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.241-246
• /
• 2015

In this paper, we consider a relaying system which employs a single relay in a wireless network with distributed sources and destinations. Here, all source, destination, and relay nodes are equipped with multiple antennas. For amplify-and-forward relay systems, we confirm the achievable sum rate through a joint multiple source precoders and a single relay filter design. To this end, we propose a new linear processing scheme in terms of maximizing the sum rate performance by applying a blockwise relaying method combined with geometric programming techniques. By allowing the global channel knowledge at the source nodes, we show that this joint design problem is formulated as a standard geometric program, which can guarantees a global optimal value under the modified sum rate criterion. Simulation results show that the proposed blockwise relaying scheme with the joint power allocation method provides substantial sum rate gain compared to the conventional schemes.

• Coupled systems mechanics
• /
• v.9 no.6
• /
• pp.575-597
• /
• 2020

Equilibrium equations of a porous FG plate resting on Winkler-Pasternak foundations with various boundary conditions are derived using a new refined shear deformation theory. Different types of porosity distribution rate are considered. Governing equations are obtained including the plate-foundation interaction. This new model meets the nullity of the transverse shear stress at the upper and lower surfaces of the plate. The novel rule of mixture is proposed to describe and approximate material properties of the FG plates with different distribution case of porosity. The validity of this theory is studied by comparing some of the present results with other higher-order theories reported in the literature. Effects of variation of porosity distribution rate, boundary conditions, foundation parameter, power law index, plate aspect ratio, side-to-thickness ratio on the deflections and stresses are all discussed.

• KIEAE Journal
• /
• v.11 no.2
• /
• pp.3-8
• /
• 2011

This study was carried out for analysing the relationship of environmental factors and the reduction rate of land compensation of six urban development projects near waste landfill sites located in the Seoul metropolitan area. For a close investigation, 24 variables were selected but only 4 environmental variables were identified to have high correlation to the reduction rate of compensation. These are fine particles(PM10), bad smell, the ratio of a greening zone of land and park, and the distance in straight line from the landfill site. Two variables-PM10 and bad smell-were found to have an effect on the average reduction rate of land compensation by correlation analysis. On the other hand, the ratio of a greening zone and the distance in straight line from the landfill site have been rejected for the significance test. The result of regression analysis of six models for the search of affecting variables on the reduction rate of compensation is that PM10 and bad smell have the impact ratio of more than 0.5. But the ratio of greening zone and the distance from the landfill are not significant factors, having the impact ratio of 0.025~0.045 except one model.

• Journal of Aquaculture
• /
• v.21 no.4
• /
• pp.299-303
• /
• 2008

A 6 and 8-week feeding trial was conducted to determine optimal feeding rate for parrot fish Oplegnathus fasciatus during the low temperature season. To estimate the optimal feeding rate calculated by weight growth rate, one year (mean body weight: 62.7 g) and the two year old parrot fish (mean body weight: 344.7 g) were stocked under low water temperature conditions. The optimal feeding rates in low water temperature condition of $15^{\circ}C$ were calculated as 1.61% of body weight (90% of satiation level) for the one year of 62 g, and calculated as 0.28% of body weight (80% of satiation level) for the two years old fish.