• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.915-921
• /
• 2005

Accurate and reliable tracking system is essential for the central train control system. There are two systems widely being used. one is the fixed block system which utilizes the track circuit for the detection of train position. the other is the moving block system which has the advantage over the former since it enables shorter radio signal for the train position detection. In this paper a new algorithm is proposed which uses signal's phase difference of arrival to detect the train position. Experimental verification of the algorithm is presented in the paper.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 제6회 파동 및 레이저 학술발표회 Prodeedings of 6th Conference on Waves and Lasers
• /
• pp.121-125
• /
• 1991

A basic coherent optical transmission was demonstrated using FSK modulation and heterodyne detection scheme. Optical frequency of DFB LD light source at the transmitter side was stabilized with Fabry Perot etalon and bias feedback circuit. A tunable external cavity LD was used as a local oscillator at the receiver. Heterodyned output signal at IF frequency of 2GHz was measured and discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.146-148
• /
• 1997

This paper investigates the position sensorless control of switched reluctance motor. The system consists of the position detection circuit by the new phase detection algorithm, digital logic commutator, PLL for speed control and 4-phase inverter. The performances in the proposed system are verified through the experiment.

• 한국철도학회논문집
• /
• 제13권5호
• /
• pp.500-503
• /
• 2010

지금까지 궤도회로는 레일을 전기회로의 일부로 사용하여 열차의 위치 검지용으로만 사용하였으나 철도차량이 고속화 되면서, 지상신호의 한계를 극복하기 위하여 차상신호시스템의 사용이 일반화 되어가고 있다. 궤도회로의 전원은 직류나 고전압 임펄스를 사용하던 방식에서 가청주파수를 사용하는 고주파 교류궤도회로의 사용이 일반화 되고 있다. 철도도상도 환경과 궤도의 유지보수성 개선을 위하여 철근콘크리트 도상의 사용이 증대되고 있다. 철근 콘크리트 도상에서 고주파 교류궤도회로를 사용할 경우 도상의 내구성 향상을 위하여 사용되는 수많은 격자모양의 철근들로 인하여 전기적 절연에 의한 누설전류가 아닌 자기결합에 의한 손실로 인한 궤도정수의 변화를 초래할 수 있다. 본 논문은 철근콘크리트도상에서 AF(Audio Frequency)궤도회로를 사용하였을 경우 도상 철근에 의한 궤도회로신호의 영향과 손실을 시뮬레이션을 통하여 알아보고 이를 방지할 수 있는 방안을 제시하였다.

• 전력전자학회논문지
• /
• 제18권3호
• /
• pp.217-224
• /
• 2013

This paper presents a diagnostic method for a sparse matrix converter that detects faults in any single switch or a pair of switches. The sparse matrix converter is functionally equivalent to the standard matrix converter but has a reduced number of switches. The proposed diagnostic method is based in the measurement of input and output currents. The currents have respective characteristic according to the location of faulty switches. This method not only detects the switches of open-circuit fault but identifies the location of the faulty switching devices without complicated calculations. The simulation and experimental results verify that, based on the proposed method, the fault of sparse matrix converter can be easily and fast detected.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술대회 논문집 전문대학교육위원
• /
• pp.113-116
• /
• 2003

BiCMOS circuit consist of CMOS part which constructs logic function, and bipolar part which drives output load. In this paper, proposes a method for efficiently generating test pattern which detect faults in BiCMOS circuits. In proposed method, BiCMOS circuit is divided into pull-up part and pull-down part, using structural property of BiCMOS circuit, and we generate test pattern using set theory for efficiently detecting faults which occured each divided blocks.

• 전기학회논문지P
• /
• 제53권1호
• /
• pp.22-27
• /
• 2004

BiCMOS circuit consist of CMOS part which constructs logic function, and bipolar part which drives output load. In BiCMOS circuits, transistor stuck-open faults exhibit delay faults in addition to sequential behavior. In this paper, proposes a method for efficiently generating test pattern which detect stuck-open in BiCMOS circuits. In proposed method, BiCMOS circuit is divided into pull-up part and pull-down part, using structural property of BiCMOS circuit, and we generate test pattern using set theory for efficiently detecting faults which occured each divided blocks.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권1호
• /
• pp.23-30
• /
• 2016

We report a STT-MRAM write-scheme, in which the length of the write-pulse is determined dynamically by sensing the status of MTJ cells. The proposed scheme can reduce the power consumption by eliminating unnecessary writing current after the switching has occurred. We also propose a reference cell design, which is optimized for the use in write-circuits. The performance of the proposed circuit was verified by SPICE level simulations of the circuit implemented in a $0.13{\mu}m$ CMOS process.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1099-1100
• /
• 2008

In this paper, we would like to introduce a simple and low cost wired pointing device by using a electromagnetic induction. A number of patents of Wacom describe electronic drawing devices or styluses. The movement of the stylus over a tablet is traced electronically and used applied to a resonant circuit in the stylus. Electromagnetic radiation emitted by the resonant circuit is detected by a sensing mechanism and location processing is used to locate the stylus. In this research, difference coil principle is used to detect the emitted radiation of the resonant circuit in the pen. This detection device shows good performance to detect the location of the pen on the tablet.

• 동력기계공학회지
• /
• 제3권2호
• /
• pp.64-69
• /
• 1999

The paper shows a result for development of BLDC motor drive by using a resolver as position detection sensor. The developed drive use a method detecting rotor position based on HSI interrupt function of microprocessor without a specialized counting circuit. The algorithm generating three-phase PWM wave to change switching voltage and current is realized based on single chip microprocessor. The PWM generating part and position counting circuit are realized by software technique without usage of conventional analogue circuit or object-oriented chips. So the drive system become compact. The effectiveness of the developed drive is verified by experimented results of speed response for step reference input.