• 펄프종이기술
• /
• 제36권3호
• /
• pp.15-34
• /
• 2004

Diverse benefits such as reduction of fresh water consumption and effluent discharge, efficient use of raw materials and energy savings can be obtained by papermaking system closure. Closure of papermaking processes, however, causes many problems including reduction of the efficiency of additives, decrease of retention and dewatering, felt plugging, poor Paper quality, generation of slime and odor, poor vacuum efficiency, etc, and it has been recognized that accumulation of Inorganic and organic substances in the process white water is the prime cause of these problems. Therefore, technological developments for preventing accumulation of these detrimental substances are urgently required for Implementing papermaking system closure. Understanding of the accumulation phenomena of the inorganic and organic substances in the papermaking process white water is prerequisite for papermaking system closure. In this study a process simulation method was used to analyze the accumulation phenomena of anionic starch In the process white water as the closure level of a fine paper making process is increased. A pilot paper machine was used as a model process. Starch adsorption and desorption models were developed based on the concept of starch adsorption ratio, which was not considered in previous studies. Steady state simulation studies were carried out based on this model using a commercial simulator. In steady state simulation, the variation of dissolved starch concentration in each process unit was monitored as a function of white water usage for wire shower. The result of the steady state simulation showed that dissolved starch concentration and its increase ratio in Process units increased as white water usage ratio for wire shower increased.

• Carbon letters
• /
• 제28권
• /
• pp.87-95
• /
• 2018

This study examined the influence of operating parameters on the electrosorptive recovery system of lithium ions from aqueous solutions using a spinel-type lithium manganese oxide adsorbent electrode and investigated the electrosorption kinetics and isotherms. The results revealed that the electrosorption data of lithium ions from the lithium containing aqueous solution were well-fitted to the Langmuir isotherm at electrical potentials lower than -0.4 V and to the Freundlich isotherm at electrical potentials higher than -0.4 V. This result may due to the formation of a thicker electrical double layer on the surface of the electrode at higher electrical potentials. The results showed that the electrosorption reached equilibrium within 200 min under an electrical potential of -1.0 V, and the pseudo-second-order kinetic model was correlated with the experimental data. Moreover, the adsorption of lithium ions was dependent on pH and temperature, and the results indicate that higher pH values and lower temperatures are more suitable for the electrosorptive adsorption of lithium ions from aqueous solutions. Thermodynamic results showed that the calculated activation energy of $22.61kJ\;mol^{-1}$ during the electrosorption of lithium ions onto the adsorbent electrode was primarily controlled by a physical adsorption process. The recovery of adsorbed lithium ions from the adsorbent electrode reached the desorption equilibrium within 200 min under reverse electrical potential of 3.5 V.

• BMB Reports
• /
• 제38권5호
• /
• pp.545-549
• /
• 2005

Acidithiobacillus ferrooxidans is one of the most important bacterium used in bioleaching, and can utilize $Fe^{2+}$ or sulphide as energy source. Growth curves for Acidithiobacillus ferrooxidans under phosphate starvation and normal condition have been tested, showing lag, logarithmic, stationary and aging phases as seen in other bacteria. The logarithmic phases were from 10 to 32 hours for Acidithiobacillus ferrooxidans cultivated with normal cultivating condition and from 20 to 60 hrs for Acidithiobacillus ferrooxidans cultivated phosphate starvation. Differences of protein patterns of Acidithiobacillus ferrooxidans growing in case of normal or phosphate starvation were separately investigated after cultivation at $30^{\circ}C$ by the analysis of two-dimensional gel electrophoresis (2-DE), matrix-assisted laser desorption/ionization (MALDI)-Mass spectrometry. There were total 6 protein spots identified, which were Recombination protein recA, RNA helicase, AP2 domain-containing transcription factor, NADH dehydrogenase I chain D, Hyothetical protein PF1669, and Transaldolase STY3758. From the 6 identified protein spots, 3 proteins were found to be decreased in expression at the cultivating condition of phosphate starvation, while another three upregulated.

• 공업화학
• /
• 제27권3호
• /
• pp.265-269
• /
• 2016

수소가 청정 에너지 원으로서의 중요성이 증가하면서 수소의 생산원인 암모니아 기체가 큰 주목을 받고 있다. 그러나 암모니아가 금속을 잘 부식시키고 유독성을 가지고 있기 때문에 암모니아의 저장과 운반을 가능하게 하는 흡착제의 연구가 다각도로 진행되고 있다. 이 중 공유결합 유기구조 물질(covalent organic framework)의 하나인 COF-10은 붕소를 포함한 큰 기공을 가진 물질이다. 암모니아 흡착과정에서 COF-10의 구조 안에 있는 붕소는 루이스 산으로 작용하여 암모니아와 강한 결합을 한다. 본 논문에서는 이러한 COF-10을 합성하여 BET, XRD, FT-IR을 통해 구조를 확인한다. 또한 TPD와 등온 흡착 실험을 통해 실제 암모니아의 흡착능력에 대한 분석을 진행하였다. COF-10는 9.79 mmol/g으로 우수한 암모니아 흡착 능력을 보였으며 암모니아 흡착제로서 활용 가능할 것으로 사료된다.

• 공업화학
• /
• 제19권6호
• /
• pp.680-684
• /
• 2008

Silica sand 내에서의 메탄 하이드레이트($CH_4$ hydrate)의 형성과 분해는 $7.0^{\circ}C$의 온도에서 실험되었다. Silica sand 내에서 형성되는 메탄 하이드레이트의 형성 및 분해 특성을 연구하기 위해 새로운 반응기를 제작하였다. Silica sand bed 내에서 메탄하이드레이트의 형성과 분해되는 동안의 온도변화에 대한 연구를 위해 반응기 내의 주입한 silica sand 높이에 따라 열전대의 위치를 다르게 설치하여 실험하였다. 반응기 내에 가해지는 압력과 온도는 메탄 하이드레이트의 형성과 분해를 발생시키는 요인이다. 메탄 하이드레이트 형성을 위한 가스 흡착곡선과 분해실험을 위한 가스 발생곡선은 실험데이터로부터 결정되었다. 8 MPa의 압력에서 $7.0^{\circ}C$의 온도에서 메탄 하이드레이트 형성 실험을 수행한 결과 70%의 메탄이 하이드레이트로 전환됨을 알 수 있었다. 형성된 메탄 하이드레이트의 분해에 의한 메탄의 회수율은 82%였다.

• Mass Spectrometry Letters
• /
• 제2권2호
• /
• pp.49-52
• /
• 2011

Competitive binding of $C_{60}$ and $C_{70}$ to meso-substituted porphyrins was studied by mass spectrometry (MS). Electrospray ionization MS was employed to acquire the mass spectra of 1 : 1 porphyrin-fullerene complexes formed in a mixture of mesosubstituted porphyrin and fullerite to determine the ratio of complexes between $C_{60}$ and $C_{70}$. Matrix-free laser desorption ionization MS was used to obtain the mass spectra of fullerite to measure the mole fraction of $C_{60}$ and $C_{70}$. The binding constant ratio ($K_{70}$/$K_{60}$) was determined from the mass spectral data. The difference in standard Gibbs free energy change, ${\Delta}({\Delta}G^o)_{70-60}$, for the competitive binding of $C_{60}$ and $C_{70}$ was calculated from $K_{70}$/$K_{60}$. Of the five porphyrins, tetraphenyl, tetra(4-pyridyl), tetra(4-carboxyphenyl), tetra(3,5-di-tert-butylphenyl), and tetra(pentafluorophenyl) porphyrins, the first three non-bulky porphyrins yield negative values of ${\Delta}({\Delta}G^o)_{70-60}$, whereas the other two bulky porphyrins result in positive values of ${\Delta}({\Delta}G^o)_{70-60}$. This result indicates that $C_{70}$ binding to porphyrin is thermodynamically favored over $C_{60}$ binding in non-bulky porphyrins, but disfavored in bulky ones. It also suggests that the binding mode of $C_{70}$is different between non-bulky and bulky porphyrins, which is in line with previous experimental findings of the "side-on" binding to non-bulky porphyrins and the $C_{60}$-like "end-on" binding to bulky porphyrins.

• 공업화학
• /
• 제25권4호
• /
• pp.346-351
• /
• 2014

인구증가와 산업화로 인한 물의 수요 급증에 따른 제3세대 수처리 기술로써 정전기적 흡 탈착 공정에 대한 연구가 진행되고 있다. 정전기적 흡 탈착 기술의 경우, 기존에 사용되는 수처리 방법들에 비해 에너지 소비량이 적으며, 재생시에 2차 오염이 발생하지 않아 차세대 수처리 기술로 주목 받고 있다. 정전기적 흡 탈착 기술에서 이온 제거를 위한 전극 물질로는 넓은 비표면적과 높은 전도도를 갖는 탄소 전극이 주로 사용된다. 현재 다양한 탄소 물질로 이루어진 전극에 대한 연구가 수행되고 있으며, 특히 비표면적, 기공 분포에 따른 흡 탈착 연구가 활발히 진행되고 있다. 본 총설에서는 다양한 탄소 물질 및 기공 분포에 따른 영향을 분석하고, 메조기공과 마이크로기공이 조화를 이루는 최적의 조건을 제시하고자 한다.

• Korean Chemical Engineering Research
• /
• 제45권6호
• /
• pp.573-581
• /
• 2007

본 연구에서는 MEA(monoethanolamine)를 함침한 메조포러스 물질을 이용하여 이산화탄소를 회수하고자 하였다. 이를 위해 MCM-41, MCM-48 및 SBA-15의 메조포러스 물질을 제조한 후 30, 50, 70 wt%의 MEA로 함침하였다. 함침한 메조포러스 물질의 특성을 평가하기 위하여 XRD, FT-IR, SEM, BET를 이용하였다. 이산화탄소 흡탈착 실험을 수행한 결과, 흡착량은 MCM-41>MCM-48>SBA-15 순으로 나타내었다. 최대 이산화탄소 흡착량은 50 wt% MEA 함침 MCM-41으로써 $40^{\circ}C$에서 $57.1mg-CO_2/gr-sorbent$이며, 이는 MCM-41과 비교할 때 8배 높았다. 그리고 20회 반복 흡탈착 실험 결과, 반복 실험에도 일정한 흡착능을 나타내었다.

• BMB Reports
• /
• 제40권1호
• /
• pp.72-81
• /
• 2007

In order to screen the aging related proteins in human normal colon epithelia, the comparative proteomics analysis was applied to get the two-dimensional electrophoresis (2-DE) profiles with high resolution and reproducibility from normal colon epithelial tissues of young and aged people. Differential proteins between the colon epithelia of two age groups were found with PDQuest software. The thirty five differential protein-spots were identified by peptide mass fingerprint (PMF) based on matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) and database searching. Among them there are sixteen proteins which are significantly up-regulated in the colonic mucosal epithelia of young people group, which include ATP synthase beta chain, electron transfer flavoprotein alpha-subunit, catalase, glutathione peroxidase 1, annexin A2 and heat shock cognate 71 kDa protein, etc.; There are nineteen proteins which are significantly up-regulated in the colonic mucosal epithelia of aged people group, which include far upstream element-binding protein 1, nucleoside diphosphate kinase B, protein disulfide-isomerase precursor and VDAC-2, etc.. The identified differential proteins appear to be involved in metabolism, energy generation, chaperone, antioxidation, signal transduction, protein folding and apoptosis. The data will help to understand the molecular mechanisms of human colon epithelial aging.

• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2549-2554
• /
• 2009

The structures of 1,n-alkanedithiol (n = 2, 4, 6, 8, 10) self-assembled monolayers (SAMs) on a Au(111) substrate were investigated by electrochemical measurements and theoretical calculations. The results of the experimental techniques indicated that the dithiols, except n = 2, showed an upright molecular structure in the SAMs, in which alkanedithiols were bound to the Au surface via only one thiol functionality and the other one faced up to the air. The results also suggested that the formed dithiol SAMs were densely packed and highly oriented. Except ethanedithiol, which was thought to form a bilayer, the reductive desorption peak potentials of 1,n-alkanedithiol (n = 4, 6, 8, 10) SAMs were more negative than those of the corresponding monothiol ones in 0.1 M KOH solutions. This illustrates that the dithiol SAMs had higher stability than the corresponding monothiol ones. The major part of the high stability may be attributed to the van der Waals interaction among the sulfur atoms on top of the dithiol SAMs. The molecular modeling calculation showed that the structures of dithiol SAMs were similar to those of the corresponding monothiol SAMs and that all the dithiol SAMs, except ethanedithiol, were more stable than the corresponding monothiol SAMs. The calculated energy differences between dithiol and monothiol SAMs decreased with the increment of alkyl-chain length.