• Smart Structures and Systems
• /
• v.12 no.1
• /
• pp.1-22
• /
• 2013

Magnetic nanoparticle based bioseparation in microfluidics is a multiphysics phenomenon that involves interplay of various parameters. The ability to understand the dynamics of these parameters is a prerequisite for designing and developing more efficient magnetic cell/bio-particle separation systems. Therefore, in this work proof-of-concept experiments are combined with advanced numerical simulation to design and optimize the capturing process of magnetic nanoparticles responsible for efficient microfluidic bioseparation. A low cost generic microfluidic platform was developed using a novel micromolding method that can be done without a clean room techniques and at much lower cost and time. Parametric analysis using both experiments and theoretical predictions were performed. It was found that flow rate and magnetic field strength greatly influence the transport of magnetic nanoparticles in the microchannel and control the capturing efficiency. The results from mathematical model agree very well with experiments. The model further demonstrated that a 12% increase in capturing efficiency can be achieved by introducing of iron-grooved bar in the microfluidic setup that resulted in increase in magnetic field gradient. The numerical simulations were helpful in testing and optimizing key design parameters. Overall, this work demonstrated that a simple low cost experimental proof-of-concept setup can be synchronized with advanced numerical simulation not only to enhance the functional performance of magneto-fluidic capturing systems but also to efficiently design and develop microfluidic bioseparation systems for biomedical applications.

• IE interfaces
• /
• v.22 no.1
• /
• pp.95-103
• /
• 2009

During the past few years, design of experiments (DOE) has been gaining acceptance in the telecommunications research community as a mean for designing and analyzing experiments economically and efficiently. In addition, the need for introducing a systematic robust design methodology (i.e., one of the most popular DOE methodologies) to network simulations has been increasing. In this paper, we present an architecture of voice over IP (VoIP) application and the E-Model for calculating the perceived quality of service (QoS). Then, we apply the Taguchi robust design methodology to optimize the perceived QoS of VoIP application, and describe the detailed step-by-step procedures. We have used ns-2 simulator to collect experimental data in which the SN ratio, a robustness measure, is analyzed to determine an optimal design condition. The analysis shows that "initial delay time in playout buffer" is a major control factor for ensuring robust behaviors of the perceived QoS of VoIP. Finally, we verify the proposed optimal design condition using a confirmation experiment.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.983-989
• /
• 2005

Secondary batteries with high performance are essential in widespread use of modern portable devices such as cellular phones and laptop computers. High energy density, long cycle life, and safety are some of important requirements for secondary battery. To achieve such characteristics, a mixing proportion of electrolyte solution ingredients in the battery should be carefully chosen. In this paper, using statistical design of mixture experiments (DOME), we attempt to find an optimum condition of designing the secondary battery. DOME has a distinct feature in that the experimental region is represented by simplex, rather than hypercube, because the sum of blend proportions should be unity. Several designs based upon this point have been proposed for mixture experiments. Among them, an extreme vertices design is employed in this paper because there are a couple of blend constraints to be considered. In order to investigate how the mixing proportion interacts with other manufacturing factors, a fractional factorial design is also included across the extreme vertices design. As a result, we find that the blend proportion of solution ingredients has a significant effect on battery performances. By simultaneously optimizing two battery capacities, this paper proposes an optimum blend proportion according to process factor settings.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.3
• /
• pp.63-71
• /
• 2006

A downdraft gasifier was made of stainless steel for biomass gasification. Internal reactor had a 300 mm diameter and 8 air intakes. Three thermocouples were installed to measure the temperature inside the reactor. Three different biomass fuels were provided in the experiments to find out the effects of fuel conditions on gasification processes; charcoals, woodchips, and mixture of woodchip and charcoals. Two different experiments were conducted fer charcoal experiments, small and larger sizes of charcoal fuels. It took about 10 minutes after ignition to generate combustible producer gas when charcoal was f9d, but 20 or more minutes for woodchips. When the gasification was stabilized, the highest temperature was observed just below the combustion zone. The air flow rate for woodchip experiment was provided at 25% of a stoichiometric requirement of combustion, which was within the range of typical air flow rate fer woody biomass gasification. Carbon monoxide concentrations were also within the values reported in the previous studies, ranging 20 to 30% depending on fuel types. It could be seen that fuel size and heating value were very important parameters in biomass gasification. These parameters should be taken into account in operating and designing biomass gasifiers.

• Journal of Korean Elementary Science Education
• /
• v.39 no.3
• /
• pp.353-368
• /
• 2020

This study analyzed the teacher's perception for influence of behavioral characteristics of scientifically-gifted students on general students in elementary school science class. To do this, we selected the eight elementary school teachers who were conducting the regular science classes including scientifically-gifted students belonging to the gifted education institutes in Seoul and conducted individual in-depth interviews. The analysis of the results reveal that the teachers mentioned seven behavioral characteristics of scientifically-gifted students in general elementary school science classes.: 'excellent in designing and performing experiments', 'playing a leading role in experiments', 'expressing their abundant prior knowledge frequently', 'attempting their tasks with curiosity and persistence', 'displaying scientific creativity', 'often asking scientific questions in detail', and 'expressing their opinions logically'. These behavioral characteristics of scientifically-gifted students had positive effects on general students, such as 'providing them with a successful experience in conducting experiments', 'improving understanding of science class contents', 'developing scientific thinking and reflective thinking', and 'improving their students' positive experiences about science'. However, the excessive learning-driven behaviors of scientifically-gifted students had negative effects on general students, such as 'limiting opportunities for general students to participate in classes', 'conducting passive exploration centered on results', and 'causing conflicts with general students'. Educational implications of these findings are discussed.

• International Journal of High-Rise Buildings
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2015

A team of researchers and practitioners were recently assembled to prepare a monograph on "Wind-Induced Motion of Tall Buildings: Designing for Habitability". This monograph presents a state-of-the-art report of occupant response to wind-induced building motion and acceptability criteria for wind-excited tall buildings. It provides background information on a range of pertinent subjects, including: ${\bullet}$ Physiological, psychological and behavioural traits of occupant response to wind-induced building motion; ${\bullet}$ A summary of investigations and findings of human response to real and simulated building motions based on field studies and motion simulator experiments; ${\bullet}$ A review of serviceability criteria to assess the acceptability of wind-induced building motion adopted by international and country-based standards organizations; ${\bullet}$ General acceptance guidelines of occupant response to wind-induced building motion based on peak acceleration thresholds; and ${\bullet}$ Mitigation strategies to reduce wind-induced building motion through structural optimization, aerodynamic treatment and vibration dissipation/absorption. This monograph is to be published by the American Society of Civil Engineers (ASCE) and equips building owners and tall building design professionals with a better understanding of the complex nature of occupant response to and acceptability of wind-induced building motion. This paper is a brief summary of the works reported in the monograph.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.1
• /
• pp.19-29
• /
• 2011

Cellular network is comprised of several base stations which serve cellular shaped service area and each base station (BS) is connected to the mobile switching center (MSC). In this paper, the configuration modeling and algorithm of a cellular mobile network with the aim of minimizing the overall cost of operation (handover) and network installation cost (cabling cost and installing cost of mobile switching center) are considered. Handover and cabling cost is one of the key considerations in designing cellular telecommunication networks. For real-world applications, this configuration study covers in an integrated framework for two major decisions: locating MSC and assigning BS to MSC. The problem is expressed in an integer programming model and a heuristic algorithm based on Lagrangian relaxation is proposed to resolve the problem. Searching for the optimum solution through exact algorithm to this problem appears to be unrealistic considering the large scale nature and NP-Completeness of the problem. The suggested algorithm computes both the bound for the objective value of the problem and the feasible solution for the problem. A Lagrangian heuristics is developed to find the feasible solution. Numerical tests are performed for the effectiveness and efficiency of the proposed heuristic algorithm. Computational experiments show that the performance of the proposed heuristics is satisfactory in the quality of the generated solution.

• Korean Institute of Interior Design Journal
• /
• no.31
• /
• pp.56-63
• /
• 2002

This study intends to prepare a system that can be used, by applying digital technique, in analyzing complexity of architectural forms that have been visualized by the correlation based on the distribution chart made in accordance with profile lines. The profile lines are derived from the edge analysis of the architectural forms, simplified based on the visual theory. For the purpose, this study was conducted in the following ways: First, problems of the existing models for the elevation analysis were examined along with formal analysis based on visual recognition to consider the profile lines derived from the forms. Secondly, in elevation analysis, profile lines were derived by digital method to measure them qualitatively. To verify the objectivity of the measured data value, a survey was conducted based on the adjective cataloging method, and the correlation of the survey result and analyzed data was analyzed to verify the validity of the derived data. Thirdly, supplementation for the problems deducted from experiments and the possibility to use it in designing were suggested. Digital method has many advantages over the conventional analyzing system in deriving precise data value by excluding subjectivity. It also allows various analytical methods in analyzing numerous data repeatedly. Diversified models and methods of analysis considering numerous factors arising in the process of designing remain assignments to research in future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.12
• /
• pp.967-975
• /
• 2013

In the design of underwater electro acoustic transducer, power factor improvement circuit is more required rather than impedance matching if the driving power amplifier has little inner resistance. Many research results have been focused on the power matching circuit designing for transferring maximum power in the wideband. There are few results in the designing study on the power factor improvement for the wide band underwater electro acoustic transducer. In this paper, we set up a new design method on the power factor improvement for the wide band electro acoustic transducer, and confirm its feasibility by the experiments.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.32
• /
• pp.243-253
• /
• 1994

Work environments have been changed with the advent of new technologies, such as computer technology. The newer technologies, the more changes in our work conditions. However, human cognitive limits can't keep up with the change of work environments. Mental workload has been an important factors in designing modem work environments such as human-computer interaction. Designing man-machine systems requires knowledge and evaluation of the human cognitive processes which control information flow workload. Futhermore, under an urgent situation, human operator may suffer the work stress, work error, and resultant deleterious work performance. To describe the work performance in the urgent work situations, with time stress and dynamic event occurence, a new concept of information density was introduced. For a series of experiments performed for this study, three independent variables(information amount system processing time, information density) were evaluated using such dependent variables as reaction time, number of error, and number of failure. The results of statistical anlysiss indicate that the amount of information effected on all of five dependent measure. Number of failure and number of secondary task score were effected by both amount of information and operational speed of system, but reaction time of secondary task were effected by both amount of information and information density.