• 대한치과기공학회지
• /
• 제39권2호
• /
• pp.93-99
• /
• 2017

Purpose: With the development of digital dental technology, we are manufacturing prosthetic crown in various ways. However, the wax-up method that makes existing prosthetic crown is also used steadily. Thus, we will compare the shape of the crown designed with wax-up and the crown designed with CAD. Methods: Sculpt the crown with wax-up on the model to 10 dental technicians. The same model was used to design the crown CAD. Measure the size of the sculpted crown. The shapes were compared in three dimensions. Results: As a result, we could observe a difference in size and shape in crown designed with wax - up crown and crown. Conclusion: These results suggest that there are differences according to the method of carving crown and the method of processing.

• 대한치과기공학회지
• /
• 제24권1호
• /
• pp.107-126
• /
• 2002

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I am using compound method of wax bite technique and cone technique. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for mandible molar occlusion. The results of the study were as follows; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of mandible first premolar is appeared V form. 6. The development groove of mandible second premolar is appeared Y form. 7, The development groove of mandible first molar is appeared M form. 8. The development groove of mandible second molar is W form. 9. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 10. The buccal, lingual groove of molar is formed parallel with direction of teeth arrangement.

• 대한치과기공학회지
• /
• 제21권1호
• /
• pp.97-114
• /
• 1999

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for maxillary molar occlusion. The results of the study were as follows ; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of Maxillary premolar is appeared V form. 6. The development groove of Maxillary molar is appeared W form. 7. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 8. I was knew that the lingual groove and stuart's groove of molar runs parallel with oblique ridge. 9. The buccal groove of molar is formed parallel with direction of teeth arrangement.

• The Journal of Advanced Prosthodontics
• /
• 제14권4호
• /
• pp.203-211
• /
• 2022

PURPOSE. The aim of this study was to introduce rating criteria to evaluate student performance in a newly developed, digital wax-up preclinical program for computer-aided design (CAD) of full-coverage crowns and preliminarily investigate the reliability and internal consistency of the rating system. MATERIALS AND METHODS. This study, conducted in 2017, enrolled 47 fifth-year dental students of Okayama University Dental School. Digital wax-up training included a fundamental practice using computer graphics (CG), multipurpose CAD software programs, and an advanced practice to execute a digital wax-up of the right mandibular second molar (#47). Each student's digital wax-up work (stereolithography data) was evaluated by two instructors using seven qualitative criteria. The total qualitative score (0-90) of the criteria was calculated. The total volumetric discrepancy between each student's digital wax-up work and a reference prepared by an instructor was automatically measured by the CAD software. The inter-rater reliability of each criterion was analyzed using a weighted kappa index. The relationship between the total volume discrepancy and the total qualitative score was analyzed using Spearman's correlation. RESULTS. The weighted kappa values for the seven qualitative criteria ranged from 0.62 - 0.93. The total qualitative score and the total volumetric discrepancy were negatively correlated (ρ = -0.27, P = .09, respectively); however, this was not statistically significant. CONCLUSION. The established qualitative criteria to evaluate students' work showed sufficiently high inter-rater reliability; however, the digitally measured volumetric discrepancy could not sufficiently predict the total qualitative score.

• 한국가스학회지
• /
• 제18권4호
• /
• pp.63-67
• /
• 2014

Fischer-Tropsch 합성은 주로 긴 carbon 사슬을 가지고 있는 높은 점도의 왁스를 product로 생산한다. 촉매 고정층 반응기를 이용하여 Fischer-Tropsch 합성을 수행할 경우, 왁스는 촉매입자의 표면에서 생산되어 촉매입자 표면에 흡착되어 있다. 이런 왁스의 hold-up 현상이 반응기 전체의 압력강하는 증가시키고 내부 흐름을 막는 문제를 일으킨다. 따라서 반응기 내부에 왁스가 hold-up되는 현상에 대한 모델링을 통해 왁스 hold-up 현상을 최소화 할 수 있는 반응기 및 촉매 입자의 크기를 결정하는 설계 과정이 필요하다. 본 연구에서는 왁스가 hold-up된 촉매 입자와 기체 흐름 사이의 대류 물질 전달 실험 모델을 이용하여 반응기 구조 및 운전 조건을 고려할 수 있는 반응기 내부 왁스 hold-up 모델을 개발하였다. 개발된 모델은 실험 데이터를 제공한 Knochen의 연구 결과와 비교하여 모델의 우수성을 검증하였다. 이 모델을 이용하여 반응기의 길이와 단면이 반응기 내부 왁스 hold-up 현상에 어떻게 영향을 미칠 수 있는지 분석해 보았다.

• 대한치과보철학회지
• /
• 제55권2호
• /
• pp.164-170
• /
• 2017

다른 보철 수복에 비하여 전치부의 수복을 위해서는 치료 계획 단계에서 환자 요구도를 반영해야 할 필요성이 증가된다. 임상 사진과 프리젠테이션 소프트웨어를 이용한 Digital Smile Design (이하 DSD)방식은 치료 계획을 효과적으로 시각화할 수 있어 환자 및 기공사과의 의사 소통이 용이하다. 본 증례에서는 기존 보철물에 대하여 심미적 불만을 갖고 있는 환자에서, 두 가지 방식으로 재수복을 진행하였다: (1) 심미 진단, 미소 설계와 의사소통을 위하여 DSD 방식을 이용하고, 임시 및 최종 보철물 제작에 전적으로 디지털 방식을 사용한 경우 (2) 미소 설계를 위해 진단 납형을 이용하고 보철물은 통법대로 제작한 경우. 이 증례에서 의사 소통의 측면에서는 DSD방식이 수월하였으나, (1)의 방법으로는 심미적 목적을 달성하지 못하여, 예지성 있는 결과를 위해서는 성공적 의사 소통 이외에도 다양한 심미 요소를 고려한 진보된 형태의 미소 설계 도구가 필요할 것으로 생각되었다.

• 대한치과보철학회지
• /
• 제53권3호
• /
• pp.244-249
• /
• 2015

최근 디지털 기술이 발달하면서 임플란트 식립 시 가이드 템플릿을 이용하는 컴퓨터 가이드 수술이 활발하게 이루어지고 있으며, 임플란트 보철시 구강스캐너를 이용하는 방법이 소개되고 있다. 가이드 템플릿의 제작방법은 크게 RP 제작 시스템과 벡터 밀링 시스템으로 나눌 수 있는데, 각각은 우수한 정확성에도 불구하고 임상적 적용에 있어 약간의 아쉬운 점을 보이고 있다. 이에 본 증례에서는 CBCT 및 구강스캐너로 획득한 디지털 영상을 이용하여 쾌속조형법으로 왁스재료의 작업모형을 제작하고 그 위에 교정용 레진으로 금속애관을 픽업해 내는 방법을 사용하여 임플란트 수술용 가이드 템플릿을 제작하여 수술에 사용하였으며, 임상적으로 임플란트 식립 및 최종보철물 제작 시 만족스러운 결과를 얻을 수 있어서 이를 보고하고자 한다.

• The Journal of Advanced Prosthodontics
• /
• 제9권6호
• /
• pp.463-469
• /
• 2017

PURPOSE. To evaluate the fit of a three-unit metal framework of fixed dental prostheses made by subtractive and additive manufacturing. MATERIALS AND METHODS. One master model of metal was fabricated. Twenty silicone impressions were made on the master die, working die of 10 poured with Type 4 stone, and working die of 10 made of scannable stone. Ten three-unit wax frameworks were fabricated by wax-up from Type IV working die. Stereolithography files of 10 three-unit frameworks were obtained using a model scanner and three-dimensional design software on a scannable working die. The three-unit wax framework was fabricated using subtractive manufacturing (SM) by applying the prepared stereolithography file, and the resin framework was fabricated by additive manufacturing (AM); both used metal alloy castings for metal frameworks. Marginal and internal gap were measured using silicone replica technique and digital microscope. Measurement data were analyzed by Kruskal-Wallis H test and Mann-Whitney U-test (${\alpha}=.05$). RESULTS. The lowest and highest gaps between premolar and molar margins were in the SM group and the AM group, respectively. There was a statistically significant difference in the marginal gap among the 3 groups (P<.001). In the marginal area where pontic was present, the largest gap was $149.39{\pm}42.30{\mu}m$ in the AM group, and the lowest gap was $24.40{\pm}11.92{\mu}m$ in the SM group. CONCLUSION. Three-unit metal frameworks made by subtractive manufacturing are clinically applicable. However, additive manufacturing requires more research to be applied clinically.

• 대한치과기공학회지
• /
• 제40권3호
• /
• pp.183-190
• /
• 2018

Purpose: The purpose of this study was to evaluated the process of model analysis, design, and production for a full mouth prosthetic rehabilitation of function, esthetics, and pronunciation. Methods: This is a case report of class III malocclusion with a severe anterior incisor occlusion and a prosthetic treatment of patient with poor occlusion of posterior teeth. A provisional restoration based on the diagnostic wax-up was applied to the patient. And then functions, esthetics, and occlusal stability were observed during 4 week tracking period. Final restorations were delivered and evaluated based on a systematic analysis, diagnosis and treatment plan. Results: We confirms that this case study obtained the satisfactory results in terms of functions and esthetics. Conclusion : If we can give the patient the continuous evaluation and progress monitoring, we expect the dentist and the dental technician to design the prosthesis successfully.

• The Journal of Advanced Prosthodontics
• /
• 제3권1호
• /
• pp.37-42
• /
• 2011

Partial edentulism has multiple implications in relation to function, esthetics and future rehabilitative treatment. This case report illustrates the management of a patient with extreme consequences of partial edentulism. The main clinical findings were unopposed remaining teeth, overeruption of the remaining teeth, loss of vertical dimension of occlusion, and significant disfigurement of the occlusal plane. Following the diagnostic procedure, a well-coordinated prosthodontic treatment involving liaison with other dental disciplines was indicated. The management involved an innovative combination of fixed and removable prostheses in conjunction with crown lengthening surgery and strategic implant placement. Series of provisional prostheses were applied to facilitate the transition to the final treatment.