• 한국항공우주학회지
• /
• 제43권7호
• /
• pp.601-608
• /
• 2015

유연날개의 공력 및 구조 설계값을 설계 변수로 하여 정적 상태에서의 정적 공탄성해석 및 최적화를 수행하였다. 정적 공탄성해석과 최적화를 위해 상용 해석소프트웨어들이 연계된 강건한 다분야 최적설계 시스템을 개발하였다. 최적화 설계변수로는 가로세로비, 테이퍼비, 후퇴각과 날개 위아래 스킨 두께를 설정하였다. 전역적 다목적 최적화를 위해 실수기반 적응영역 다목적 유전자 알고리즘을 적용하였으며 계산시간을 줄이기 위해 메타모델로 서포트벡터회귀 기법을 적용하였다. 유연날개에 대한 파레토 결과 분석을 통해 최대 항속시간과 최소 중량에 대한 최적 결과를 확인하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권2호
• /
• pp.150-158
• /
• 2017

Purpose: The RAM objective is a very important factor that has a great effect on the improvement of the operation ration during the operation maintenance and the reduction of the life cycle cost. It is used as a design criterion during the system development, and its sufficiency should be evaluated during its test evaluation. Method: This study analyzed the cases related to RAM objective setting and suggested the improvement measures. Result: The base data for RAM objective is OMS/MP, which needs to be drawn up under the supervision of the requirement military, and a high-accuracy operating availability should be set through ALDT calculation which reflects the military logistics support environment. In addition, data collection necessary for RAM objective and RAM analysis should be made by supplementing the input data of DELIIS. Conclusion: This study suggests improvement of RAM objective considering for the weapon system.

• 한국광학회지
• /
• 제34권6호
• /
• pp.248-260
• /
• 2023

낮은 NA의 굴절형 대물렌즈와 반사형 focal reducer로 구성된 NA 0.5의 굴절-반사 대물렌즈를 설계하였다. 굴절형 대물렌즈로는 NA 0.25인 Lister 대물렌즈가 사용되고, 반사형 focal reducer는 구면수차, 코마, 비점수차가 보정된 2구면경계가 사용되었다. 설계된 굴절-반사 대물렌즈는 높은 NA를 가졌음에도 18 mm의 긴 작동거리와 NA 0.25의 Lister 대물렌즈보다 개선된 결상성능을 가지고 있다.

• 제어로봇시스템학회논문지
• /
• 제7권10호
• /
• pp.812-818
• /
• 2001

This paper proposes an optimum design method of structural and control systems, taking a 2-D truss structure as an example. The structure is supposed to be subjected to initial static loads and disturbances. For the structure, a FEM model is formed, and using modal transformation, the equation of motion is transformed into that of modal coordinates in order to reduce the D.O.F. of the FEM model. The structure is controlled by an output feedback $H^$\infty$$ controller to suppress the effect of the disturbances. The design variables of the simultaneous optimal design of control-structure systems are the cross sectional areas of truss members. The structural objective function is the structural weight. The control objective function is the $H^$\infty$$ norm, that is, the performance index of control. The second structural objective function is the energy of the response related to the initial state, which is derived from the time integration of the quadratic form of the state in the closed-loop system. In a numerical example, simulations have been carried out. Through the consideration of structural weight and $H^$\infty$$ norm, an advantage of the simultaneous optimum design of structural and control systems is shown. Moreover, while the optimized performance index of control is almost kept, we can acquire better design of structural strength.

• 한국철도학회논문집
• /
• 제13권2호
• /
• pp.222-228
• /
• 2010

전기 기관차 중수선 시설과 같이 복잡한 시스템의 설계 변수와 중요 변수 최적화는 수리적인 형태로 분석하는 것이 매우 어려운 작업이 된다. 본 논문에서는 메타 모델의 개념을 시뮬레이션 근사 모델에 적용하여 설계 변수와 중요 변수의 최적화를 수행하였다. 시뮬레이션 설계를 위하여 Critical Path 분석과 민감도 분석 수행하여 설계 변수와 실험 횟수를 줄이기 위하여 노력을 하였다. 시뮬레이션 분석은 다 목적 비선형 계획법을 구성한 후 파레토 최적해 집합을 산출하여 설계자에게 다중 대안의 해 집합을 제시하여 실제 시스템의 적용에 대한 유동성을 제공하려고 노력하였다. 본 논문에서 제시 된 기법은 열차 중수선 시설의 설계 및 분석에 있어서 시뮬레이션과 메타 모델을 이용한 하나의 방법으로 이용이 가능 할 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2666-2671
• /
• 2007

This work presents microchannel heat sink shape optimization procedure using Kriging method. Design variables relating to microchannel width, depth and fin width are selected, and thermal resistance has been taken as objective function. Design points are selected through a three-level fractional factorial design of sampling method. Navier-Stokes and energy equations for laminar flow and conjugate heat transfer are solved at these design points using a finite volume solver. Solutions are carefully validated with experimental results. Using the numerically evaluated objective function, a surrogate model (Kriging) is constructed and optimum point is searched by sequential quadratic programming. The process of shape optimization greatly improves the thermal performance of microchannel heat sink under constant pumping power.

• 한국기계가공학회지
• /
• 제7권3호
• /
• pp.3-11
• /
• 2008

Robust design pioneered by Dr. G. Taguchi has been applied to versatile engineering problems for improving quality. Since 1980s, the Taguchi method has been introduced to numerical optimization, complementing the deficiencies of deterministic optimization, which is often called the robust optimization. In this study, the robust optimization strategy is proposed by considering the robustness of objective and constraint functions. The statistics of responses in the functions are surrogated by kriging models. In addition, objective and/or constraint function is represented by the probability of success, thus facilitating robust optimization. The mathematical problem and the two-bar design problem are investigated to show the validity of the proposed method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권7호
• /
• pp.891-898
• /
• 2011

The present work was conducted to get the best geometric information for the optimum design of the complex heat exchanger. The objective function for optimal design was expressed as a combination of pressure drop and heat transfer rate. The geometric parameters for the variables of louver pitch and height, tube width, etc., were limited to ranges set by manufacturing conditions. The optimum geometric parameters were calculated by using empirical correlations and theory. The sensitivity of the parameters and optimum values are shown and discussed. The weighting factor in the objective function is important in the selection of the louver fin-tube heat exchanger.

• 대한교통학회지
• /
• 제6권1호
• /
• pp.5-16
• /
• 1988

Development is given to an optimal network design method using continuous design variables. Modified Hooke-and-Jeeves algorithm is implemented in order to solve nonlinear programming problem which is approximately equivalent to the real network design problem with system efficiency crieteria and improvement cost as objective function. the method was tested for various forms of initial solution, and dimensions of initial step size of link improvements. At each searching point of evaluating the objective function, a link flow problem was solved with user equilibrium principles using the Frank-Wolfe algorithm. The results obtained are quite promising interms fo numbers of evaluation, and the speed of convergence. Suggestions are given to selections of efficient initial solution, initial step size and convergence criteria. An approximate method is also suggested for reducing computation time.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.438-444
• /
• 2001

The objective of this study is to provide a simple methodology to find optimum processing conditions to fabricate sub-micron structured DVD-RAM substrates with superb optical and geometrical properties. It was found that the birefringence, which is regarded as one of the most important optical properties for an optical disk, was very sensitive to the mold wall temperature history. Also, the integrity of the replication, represented by the land-groove structure and the radial tilt were influenced by the mold temperature and the compression pressure. A set of optimum conditions were obtained by applying Design of Experiment and the objective functions composed of three different objectives.