• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4A
• /
• pp.324-329
• /
• 2009

In this paper, a novel Snowflake-shaped microstrip patch antenna for application in the WLAN(5.2/5.8GHz) band is designed and fabricated. The size of antenna is $21.2{\times}16mm^2$ and substrate is used Taconic-RF30. To obtain sufficient bandwidth in Return loss <-10dB and dual resonance characteristic, the Short-pin is inserted on the patch and the coaxial probe source is used. The measured results of fabricated antenna show 220MHz and 135MHz bandwidth in Return loss <-10dB referenced to the WLAN(5.2/5.8GHz) band. The measured antenna gain is $4.7{\sim}6.9dBi$ in the WLAN(5.2/5.8GHz) band. The experimental 3-dB beam width in I-plane and H-plane are $73.2^{\circ}/82.75^{\circ}$ for 5.1500Hz, $74.56^{\circ}/83.63^{\circ}$ for 5.3500Hz, and $86.24^{\circ}/85.15^{\circ}$ for 5.7850Hz, respectively.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.45-52
• /
• 2015

Fiber-reinforced polymer (FRP) has been generally accepted by civil engineers as an alternative for steel reinforcing bars (rebar) due to its advantageous specific tensile strength and non-corrosiveness. Even though some glass fiber reinforced polymer (GFRP) rebars are available on a market, GFRP is still somewhat uncompetitive over steel rebar due to their high cost and relatively low elastic modulus, and brittle failure characteristic. If the price of component materials of GFRP rebar is not reduced, it would be another solution to increase the performance of each material to the highest degree. The tensile strength generally decreases with increasing diameter of FRP rebar. One of the reasons is that only fibers except for fibers in center resist the external force due to the lack of force transfer and the deformation of only outer fibers by gripping system. Eliminating fibers in the center, which do not play an aimed role fully, are helpful to reduce the price and finally FRP rebar would be optimized over the price. In this study, the effect of the hollow section in a cross-section of a GFRP rebar was investigated. A GFRP rebar with 19 mm diameter was selected and an analysis was performed for the tensile test results. Parameter was the ratio of hollow section over solid cross-section. Four kinds of hollow sections were planned. A total of 27 specimens, six specimens for each hollow section and three specimens with a solid cross-section were manufactured and tested. The change by the ratio of hollow section over solid cross-section was analyzed and an optimized cross-section design was proposed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.9-14
• /
• 2020

Four developed patents have applied for a new type of Composite Cyclone Scrubber followed by the previous research (Cho and Kim, 2017), including dust reducing fan with filters. Regarding target installation and maintenance cost, 64% reduction for investment costs (6.2 billion won vs. 17 billion won) compared to existing road pollution reduction system, while social benefit costs increase by 43% compared to existing road pollution reduction measures (72.6 billion won vs. 50.8 billion won). The composition of the device is an air blower type spiral guide vane, and an injection pressure collecting dust efficiency. A nozzle varies Injection angle and contact range, spray liquid species (waterworks, salty water). The proposed patent tests are circulation water Time-by-Time Spray and collected 41.4% more increased micro dust since the sprayed water meets contaminated gas due to the 45° degree colliding, which is 141% increased conventional dust collector. (Ratio of collection over 85%). As regards the source of collection liquid, circulated rainwater and well water, we expect a huge amount of energy and economically saved eco-friendly system in our patent. Finally, the guided vane and metal filter reduced over 90% micro-dust, while sprayed water cleans the vane and filters, resultantly minimizing the maintenance budget. The preliminary evaluations of the developed design make it possible to reduce not only cheaper maintenance budget due to the characteristic water spraying but the cost of water comes from mainly rain and underground.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.6
• /
• pp.533-538
• /
• 2013

The damage caused by Recent frequently occurring locality torrential rains is increasing rapidly. In case of densely populated metropolitan area, casualties and property damage is a serious due to landslides and debris flows and floods. Therefore, the importance of predictions about the torrential is increasing. Precipitation characteristic of the bad weather in Korea is divided into typhoons and torrential rains. This seems to vary depending on the duration and area. Rainfall is difficult to predict because regional precipitation is large volatility and nonlinear. In this paper, Very short-term precipitation forecasting pattern model is implemented using KLAPS data used by Korea Meteorological Administration. we designed very short term precipitation forecasting pattern model using GA-based RBFNNs. the structural and parametric values such as the number of Inputs, polynomial type,number of fcm cluster, and fuzzification coefficient are optimized by GA optimization algorithm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.841-847
• /
• 2014

Urban runoff models have been continuously developing with concerns for urban flood. Recently, models that be able to quantitatively analyze surface inundation caused by overflowed water from storm sewer were also developed by coupling 1-dimensional sewer model and 2-dimensional surface flow model. However, only overflowed water from storm sewer can be analyzed by the models have been developed until now. They are limited to be not able to analyze surface inundation caused by surface runoff that could not flow into the storm sewer. In order to overcome the limitation, basin-overlap method was devised adding a dummy 1-dimensional sewer layer to the model, so it can consider the efficiency of inflow to the storm sewer system. XP-SWMM 2011 is applied for urban runoff model and the flood event occurred on July 27, 2011 in basin-shaped Sadangcheon watershed is chosen for study inundation event. According to simulation results basin-overlap method reappear the observed inundation event more precisely than traditional method. This results suggest that drainage system has to be improved for reducing inundation caused by surface runoff and would be used as considerations for planning an urban basin design magnitude.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.87-96
• /
• 2015

Purpose - Several domestic telecommunication companies have made a considerable effort to continuously grow and survive, and they have strived to thrive in the midst of mature market competition. To overcome this challenging situation and to grow continuously, while still meeting customer needs that are becoming more diverse and complicated with the passage of time, extensive support for internal marketing is essential. Without such internal support, companies face serious limitations and market roadblocks. The communication industry is a high-level service industry and a basic communications industry characteristic is its significant dependence on the employees delivering the services. Therefore, entrepreneurs in the information/communications industry, as well as existing competitors, should look to satisfy external customers through critical investment in internal customers (employees). Therefore, it is important for research to examine how internal factors influence technology innovation and service quality, which are the key drivers for companies that are seeking leading market positions. Research design, data, and methodology - The purpose of this study is to analyze the relationship of technology innovation and perceived service quality with the internal marketing factors in the communication industry and to offer suitable and effective internal marketing suggestions. The independent variables of this study are internal communication, education and training, the support of the executives, reward systems, and empowerment. The dependent variables are technology innovation and perceived service quality. Utilizing these, this paper studies the influence of internal marketing factors on technology innovation and perceived service quality. Results - The study results revealed the following. First, the identified internal marketing factors have a positive effect on technology innovation. Among the five internal marketing factors, three had a significant effect on product innovation, empowerment, the support of executives, and education and training, in this order. Second, the internal marketing factors also had a positive effect on the process innovation of technology innovation. The marketing factors, the support of executives, empowerment, internal communication, and education and training, in this order, significantly affect process innovation. Third, technology innovation had a positive effect on perceived service quality. All of the five service quality factors, namely, tangibles, reliability, assurance, responsibility, and empathy, in this order, significantly affect product innovation. Additionally, tangibles, reliability, responsibility, empathy, and assurance, in this order, significantly affect process innovation. Fourth, product and process innovation significantly affect tangibles and reliability in technology innovation. To enhance tangibles and reliability, process innovation should first be enhanced. Fifth, product and process innovation significantly affect responsibility and empathy in technology innovation. To enhance the responsibility and empathy, process innovation should first be enhanced. Sixth, product and process innovation significantly affect assurance in technology innovation. To enhance the assurance, product innovation should first be enhanced. Conclusions - According to the results, a company's internal marketing factors have a positive and significant effect on technology innovation and, further, product and process innovation have a positive and significant effect on the perceived serviced quality.

• Journal of Distribution Science
• /
• v.10 no.11
• /
• pp.61-70
• /
• 2012

Purpose - The entry of Super Supermarkets (SSM), operated by large corporations, into the retail distribution market weakens the competitive power of local supermarkets (SM) and their families leading to a rapid collapse of the local-SM market. Accordingly, this is a very sensitive and urgent issue in Korean society and politics. Therefore, the government is required to take steps to activate a local-SM market and regain the loyalty of their customers. However, in spite of the urgent need of a comparative study on the advantages and competitive power of local-SM in relation to the SSM, little research has been done on this issue to date. One purpose of this study is to analyze the differences in store characteristics of the local SM and SSM, and to explore the relationships amongst various store characteristics, such as consumption emotion, relation quality, and store loyalty between store types to provide an efficient solution to activate a local-SM market. Research design, data, methodology - To analyze the differences in the evaluation of store characteristics between store types, and to test the moderator and mediator effects, data were collected from 488 customers in Seoul, Incheon,and Gyeonggi Province. The theoretical model consists of four hypotheses, and data was processed to test these using factor analysis, t-test, regression analysis, hierarchical regression, and the three step regression proposed by Baron and Kenny. Results - First, the analysis shows that local-SM customers evaluate location characteristic factors significantly higher compared to SSM customers. However, SSM customers evaluate quality of merchandise, sales promotion activities, and store environment significantly higher. Yet, there are no significant differences in the evaluation of consumption emotion, relation quality,and store loyalty between the store types. Second, the analysis of moderator effects of the store type show that sales promotion and store atmosphere factors have a significantly negative moderating effecton positive consumption emotion, while positive consumption emotion has a significantly positive moderating effect on absorption of relation quality, while there are no significant moderating effects between consumption emotion and store loyalty. Third, while both trust and absorption of relation quality are partially mediated between consumption emotion and store loyalty, only absorption is partially mediated between positive consumption emotion and store loyalty. There are no significant mediating effects of absorption between negative consumption emotion and store loyalty. Conclusions - We strongly recommend that location restrictions on entrance of SSM into local-SM market should either be further strengthened or sustained for the activation of the local store market. Government should strengthen financial support to improve the quality of merchandise, sales promotion, employee education, store environment of the local-SM by providing appropriate business consulting. Moreover, the result implies that the owners of alocal-SM should take measures to increase customers' absorption and store loyalty, such as store cleanliness, maintaining a delightful atmosphere at the store, and training employees on attitudes towards customers. As this study is restricted within Seoul, Incheon, and Gyeonggi Province, care needs to be taken in generalizing the interpretation and application to the national level.

• Journal of the Korean Society of Radiology
• /
• v.10 no.8
• /
• pp.559-563
• /
• 2016

Recently, a barium(Ba) and an iodine(I) being studied as a conventional lead(Pb) alternatives of shielding material has excellent shieding rate, but the characteristic x-ray photons in the energy range near 30 keV line is released. In this study, with bismuth oxide(BiO) coupled barium sulfate($BaSO_4$) double layer, transmitted spectra, shieding rates and relative weighting rates were evaluated to validate the applicability of eco-friendly double layer shieding structure using monte carlo simulations as a prior study. From the evaluation results, in 0.4mm and 0.5mm thickness of BiO layers coupled with top 0.1mm-$BaSO_4$ layer, the shieding rate showed 1.9% and 3.9% higher than 0.6mm thickness of Pb single layer, respectively. In addition, the relative weight also 28% and 34.5% lower than 0.6mm-Pb in 0.4mm and 0.5mm thickness of BiO layers coupled with top 0.1mm-$BaSO_4$ layer.

• Journal of the Korean Society of Radiology
• /
• v.11 no.3
• /
• pp.171-175
• /
• 2017

In the non-destructive inspection field, we invest a lot of time and resources in developing the radiation source system to ensure the safety of the workers. However, the probability of accidents is still high. In order to prevent potential radiation accidents in advance, it is necessary to directly verify the position of the radiation source, but the research is still insufficient. In this study, we developed a monitoring system that can detect the position of the radiation source in the source guide tube in the gamma-ray irradiator. The characteristics of the radiation detector are estimated by monte carlo simulation. As a result, the radiation detector for Ir-192 gamma-ray energy was analyzed to have secondary electron equilibrium at $150{\mu}m$ regardless of the semiconductor material. Also, it is expected that the gamma ray response characteristic is the best in $HgI_2$. These results are expected to be used as a basis for determining the optimal thickness of the radiation detector located in the detection part of the future monitoring system. In addition, when developing a monitoring system based on this, radiation workers can easily recognize the danger and secure safety, as well as prevent and preemptively respond to potential radiation accidents.

• Korean Journal of Food Science and Technology
• /
• v.40 no.3
• /
• pp.283-289
• /
• 2008

This study used response surface methodology (RSM) in an effort to optimize the hot water extraction conditions of dandelion leaves in order to increase antioxidant activity in the extract. A central composite design was applied to investigate the effects of independent variables, which included the ratio of solvent to sample ($X_1$), extraction temperature ($X_2$), and extraction time ($X_3$), on dependent variables of the extracts, including soluble solid ($Y_1$), total polyphenols ($Y_2$), total flavonoid ($Y_3$), 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging ability ($Y_4$), 2,2'-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) radical scavenging ability ($Y_5$), and superoxide radical scavenging ability ($Y_6$). The estimated optimal conditions were as follows: $83.77{\pm}1.07^{\circ}C$ of the extraction temperature, $20.85{\pm}0.24 mL/g$ of solvent per sample, and $1.59{\pm}0.12$ hr of extraction time. At the optimal conditions, the predicted characteristic values were: a yield of 38.98%, a total polyphenol level of $74.28{\mu}g/mg$, a total flavonoid level of $74.00{\mu}g/mg$, a DPPH radical scavenging ability ($IC_{50}$) of 0.14 mg/mL, a ABTS radical scavenging ability ($IC_{50}$) of 3.24 mg/mL, and a superoxide radical scavenging ability ($IC_{50}$) of 2.49 mg/mL.