DOI QR코드

DOI QR Code

Design of Double Layer Shielding Structure using Eco-friendly Shielding Materials

친환경 차폐물질을 이용한 이중구조 차폐체의 설계

  • Park, Ji Koon (Department of Radiological Science, International University of Korea) ;
  • Choi, Il Hong (Department of Radiological Science, International University of Korea) ;
  • Park, Hyung Hoo (Department of Radiological Science, International University of Korea) ;
  • Yang, Sung Woo (Department of Radiological Science, International University of Korea) ;
  • Kim, Kyo Tae (Department of Biomedical Engineering, Inje University) ;
  • Kang, Sang Sik (Department of Radiological Science, International University of Korea)
  • 박지군 (한국국제대학교 방사선학과) ;
  • 최일홍 (한국국제대학교 방사선학과) ;
  • 박형후 (한국국제대학교 방사선학과) ;
  • 양승우 (한국국제대학교 방사선학과) ;
  • 김교태 (인제대학교 의용공학과) ;
  • 강상식 (한국국제대학교 방사선학과)
  • Received : 2015.10.15
  • Accepted : 2016.12.31
  • Published : 2016.12.31

Abstract

Recently, a barium(Ba) and an iodine(I) being studied as a conventional lead(Pb) alternatives of shielding material has excellent shieding rate, but the characteristic x-ray photons in the energy range near 30 keV line is released. In this study, with bismuth oxide(BiO) coupled barium sulfate($BaSO_4$) double layer, transmitted spectra, shieding rates and relative weighting rates were evaluated to validate the applicability of eco-friendly double layer shieding structure using monte carlo simulations as a prior study. From the evaluation results, in 0.4mm and 0.5mm thickness of BiO layers coupled with top 0.1mm-$BaSO_4$ layer, the shieding rate showed 1.9% and 3.9% higher than 0.6mm thickness of Pb single layer, respectively. In addition, the relative weight also 28% and 34.5% lower than 0.6mm-Pb in 0.4mm and 0.5mm thickness of BiO layers coupled with top 0.1mm-$BaSO_4$ layer.

최근 납의 대체물질로서 연구되고 있는 바륨(Ba)과 요오도(I) 등은 차폐능은 우수하지만, 30 keV 근처의 에너지 영역에서 특성 X선이 방출되는 문제점이 있다. 본 연구에서는 황산바륨($BaSO_4$)과 산화비스무스(BiO)로 구성된 친환경 이중차폐체의 적용가능성을 검증하기 위한 선행연구로 몬테카를로 시뮬레이션을 통해 투과스펙트럼, 차폐율 등을 평가하였다. 평가결과, 0.6mm 두께의 Pb 단일층과 비교하여 0.1 mm 두께의 $BaSO_4$ 하부층에 BiO 층의 두께가 0.4 mm 와 0.5 mm에서는 각각 차폐율이 1.9 %, 3.9 % 높은 성능을 보였다. 뿐만 아니라, 상대적인 중량 또한 각각 34.5 %, 28 % 경량화가 가능하다는 것을 알 수 있었다.

Keywords

References

  1. J. S. Song, "Study on optimal process development of radiation protection", Journal of radiation protection and research, Vol. 5, No. 2, pp. 1-11, 1994.
  2. K. T. Kim, H. J. Kim, J. H. Kim, C. H. Cho, I. H. Choi, J. K. Park, S. S. Kang, "Comparison of shielding rate of tungsten and lead in continuous x-ray energy using monte carlo simulation", Proceedings of the 2011 autumn symposium on the korean society of radiology, Vol. 5, No. 2, pp. 35-39, 2011.
  3. S. C. Kim, M. W. Park, "Development of radiation shielding sheet with environmentally-friendly materials;II: Evaluation of barum, tourmaline, silicon polymers in the radiation shielding sheet", Journal of radiological science and technology, Vol. 34, No. 2, 2011.
  4. Katoh Y, Fukushi M, Abe S, et al. "Evaluation of non-lead board as X-ray protective material", Nippon Hoshasen Gijutsu Gakkai Zasshi., Vol. 20, No. 63, pp. 428-435, 2007.
  5. Aghamiri M. R., Mortazavi S. M. J., et al. "A novel design for production of efficient flexible lead-free shields against x-ray photons in diagnostic energy range", J. of Biomed. Phys. Eng. Vol. 1(1). pp. 17-21, 2011.

Cited by

  1. 스크린 프린팅 공법을 통한 방사선 무연 차폐 시트에 관한 연구 vol.12, pp.6, 2016, https://doi.org/10.7742/jksr.2018.12.6.713
  2. 방사선 차폐시트의 적층 구조와 섬유 코팅의 융합적인 현상이 인장강도에 미치는 영향 vol.11, pp.6, 2016, https://doi.org/10.15207/jkcs.2020.11.6.083
  3. 무연 방사선 융합 차폐시트 단일 구조와 적층 구조의 비교를 통한 두께별 차폐성능 예측 vol.12, pp.1, 2016, https://doi.org/10.15207/jkcs.2021.12.1.105