• 한국강구조학회 논문집
• /
• 제23권4호
• /
• pp.493-501
• /
• 2011

콘크리트용 앵커볼트의 설계에 $45^{\circ}$ 콘파괴 이론이 그동안 적용되어 왔으나, 2,000년 이후부터 CCD(Concrete Capacity Design) 방법이 새로운 설계법으로 도입되었다. 그러나, 본 방법은 중소형 앵커볼트에 대한 실험 결과에 근거한 관계로 앵커볼트의 직경이 50mm 이하이고 매입깊이가 635mm 이하인 경우에만 허용되고 있다. 따라서 M50 이상의 중대형 앵커볼트에 대한 합리적인 인장파괴강도식의 도출이 필요한 실정이다. 본 연구에서는 매입깊이 400~450mm의 M56 선설치 단일 앵커볼트의 콘크리트 인장파괴강도 평가를 위해 5개의 시험체에 대해 실험을 수행하였다. 그리고, 본 실험 결과와 최근의 타 실험 결과를 종합하여 매입깊이가 280~1,200mm인 중대형급 앵커볼트에 대해 현 설계기준의 인장파괴강도식의 적용성 여부를 평가하였다.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2004년도 춘계학술대회 논문집
• /
• pp.41-47
• /
• 2004

중심합성계획(central composite design: ccd)은 반응 표면이 곡면적인 특성을 나타낼때 반응 공간을 추정하기 위해 사용되는 실험계획이다. 반응공간이 2차 회귀모형으로 나타나는 경우에 반응곡면의 변화량을 알기 위해서는 변수의 수준이 3이상이 되어야하는데 ccd는 적은 횟수의 실험으로 곡면을 효과적으로 추정하기 위해 2$^{k}$ 요인실험에 추가적으로 중심점(central point)과 축점(axial point)을 표본점에 포함시키는 계획이다. 본 연구에서는 시뮬레이션 실험에서 반응변수가 2차 회귀모형으로 근사되는 경우에 cod를 이용하여 관심 성과치의 반응표면을 추정하고자 한다. 일반적인 실험에서와는 달리 시뮬레이션 실험에서는 두개의 표본점(인자 수준의 조합)에서 분석자가 공통 난수계열(common random number series)을 부여하여 시뮬레이션 시스템 요소의 변화과정을 유사하게 통제할 수 있다. 일반적으로 공통난수법(common random number method)에 의해 얻어지는 두 표본점에서의 반응변수는 서로 양의 상관관계를 가지며 대조 난수(antithetic random number)에 의한 두 반응변수는 음의 상관성을 가지는 것으로 알려졌다. 본 연구는 ccd의 표본점에 공통난수와 대조난수 법을 이용하여 회귀모형의 파라미터를 효과적으로 추정하는 방법을 조사하고 이를 (s, S) 재고관리 모형에 적용하여 그 효율성을 평가하고자 한다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.106-110
• /
• 2002

4S-Van is being developed in order to provide the spatial data rapidly and accurately. 4S-Van technique is a system for spatial data construction that is heart of 4S technique. Architecture of 4S-Van system consists of hardware integration part and post-processing part. Hardware part has GPS, INS, color CCD, camera, B/W CCD camera, infrared rays camera, and laser. Software part has GPS/INS integration algorithm, coordinate conversion, lens correction, camera orientation correction, and three dimension position production. In this paper, we suggest that adequate 4S-Van design is needed according to application environment from various test results.

• 한국안광학회지
• /
• 제13권1호
• /
• pp.31-35
• /
• 2008

목적: 본 논문은 CCTV 카메라용 렌즈 설계를 triplet형으로 광학 설계를 하였다. 방법: 초점거리를 56 mm, 유효경을 20 mm 그리고 화각을 $5^{\circ}$로 한 망원 렌즈 형태이고, 설계하고자 하는 카메라의 CCD array detector의 크기를 2/3인치로 하였다. 결과: 광학계의 성능은 ray-fan과 spot diagram 그리고 회절 광학적인 MTF를 계산하여 평가하였고, 파장은 Fraunhofer C, d 및 F-line에 대해 achromat 되었으며 MTF 값도 tangential과 sagittal MTF 모두 50 line pairs/mm의 공간 주파수에 70% 정도가 나왔다. 결론: triplet형으로 비교적 저가 보급형 감시용 목적 CCTV 카메라를 설계하였고 충분히 실용적이라 생각된다.

• Journal of Astronomy and Space Sciences
• /
• 제11권1호
• /
• pp.41-52
• /
• 1994

Currently, the CCDs are widely used in astronomical observations either in direct imaging use or spectroscopic mode. However according to the recent technical advances, new large format CCDs are rapidly developed which have better performances with higher quantum efficiency and sensitivity. In many cases, some microprocessors have been adopted to deal with necessary digital logic for a CCD imaging system. This could often lack the flexibility of a system for a user for to upgrade with new devices, especially if it is a commercial product. A new design concept has been explored which could provide the opportunity to deal with any format of devices from any manufactures effectively for as tronomical purposes. Recently available PLD (Programmable Logic Devices)technology makes it possible to develop such digital circuit design, which can be integrated into a single component, instead of using micrprocessors. The design concept could dramatically increase the efficiency and flexibility of a CCD imaging system, particularly when new or large format devices are available and to upgrade the performance of a system. Some variable system control parameters can be selected by a user with a wider range of choice. The software can support such functional requirements very conveniently. This approach can be applied not only to astronomical purpose, but also to some related fields, such as remote sensing and industrial applications.

• 천문학논총
• /
• 제13권1호
• /
• pp.99-109
• /
• 1998

Korea Astronomy Observatory (KAO) recently developed a new model of CCD imaging system for astronomical purpose. This paper presents system structure and electrical circuit descriptions with the performance of the CCD imaging system. The developed system can handle astronomical image acquisition with additional functions of on-chip binning, sub-image acquisition using a SITe $1024\times1024$ CCD chip. Particularly the controller design of the system allows us great flexibility and versatility with the software system control and it is possible to cope with any format CCDs by any manufactures, in principle. The system performances are derived by mean variance test in our laboratory, which shows that the total system noise 10.5e-(R.M.S), Gain 1.9e-/ ADD, non-linearity $0.37\%$

• 제어로봇시스템학회논문지
• /
• 제19권11호
• /
• pp.991-997
• /
• 2013

In this paper, we propose a CFWC (CCD and fuzzy PID based width control) scheme to obtain the desired delivery width margin of a vertical rolling mill in hot strip process. A WMS(width measurement system) is composed of two line scan cameras, an edge detection algorithm, a glitch filter, and so on. A dynamic model of the mill is derived from a gauge meter equation in order to design the fuzzy PID controller. The controller is a self-learning structure to select the PID gains from the error and error rate of the width margin. The effectiveness of the proposed CFWC is verified from simulation results under a width disturbance of the entry in the mill. Using a field test, we show that the performance of the width control is improved by the proposed control scheme.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.329-334
• /
• 2005

Most people are using a Color-CCD-Camera in other to acquire a color image. But we are getting a color image with the Monochrome-CCD-Camera equipped for Rotation-Color-Filter in front of the camera lens. The Monochrome CCD Camera has some advantages such as the low price. In addition Rotation-Color-Filter's design is very simple. So we can make this structure easily and economically. In this paper, we described how to make a color image from Monocrome-Camera and correcting color well.

• Korean Journal of Geomatics
• /
• 제4권1호
• /
• pp.9-16
• /
• 2004

An object-oriented design was carried out for the digital photogrammetric processes. Classes were identified and implemented to develop an integrated digital photogrammetry system using a 3 dimensional self-calibration model for CCD cameras. This integrated system is deemed to be a significant progress from the conventional photogrammetric system which is a series of discrete processes. Object oriented methodology was selected for the implementation of the integrated photogrammetric system because it would be a very complex task to get the same result using a procedural programming language. Besides the simplification of development effort, object oriented methodology has further benefits of better management of program in case when updates to parts of the program are necessary. Using the classes designed in this study, a 3 dimensional self-calibration model was developed for a CCD camera. Classes for data input and image handling as well as classes for bundle adjustment were implemented. The bundle adjustment system was further enhanced with member functions to handle additional parameters for principal point coordinates and focal length, thereby, enabling the application to non-metric CCD cameras.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.186-191
• /
• 2015

Presently, rapidly changing and unstable global economic environments demand engineers. Products should be designed to increase profits by lowering costs and provide distinguished performance compared with competitors. This study aims to optimize the design of the power-transmission drive shaft. The mass is reduced as an objective function, and the stress is constrained under a constant value. To reduce the number of experiments, CCD (central composite design) and D-Optimal are used for the experimental design. RSM (response surface methodology) is employed to construct a regression model for the objective functions and constraint function. In this problem, there is only one objective function for the mass. The other objective function gives 1; thus, NSGA-II is used.