• Environmental Engineering Research
• /
• v.24 no.1
• /
• pp.24-30
• /
• 2019

The present study explores the applicability of response surface methodology (RSM) in conjunction with central composite design (CCD) matrix to statistically optimize ettringite crystallization process for the removal of sulphate from landfill leachate. A three factor-five coded level CCD with 20 runs, was performed to estimate the best fitted model. The RSM results indicated that the fitted quadratic regression model could be appropriate to predict sulfate removal efficiency. The pH was identified as the most dominant parameter affecting sulphate removal. 61.6% of maximum sulphate removal efficiency was obtained at pH of 11.06 for a 1.87 of $Ca/SO_4$ and 0.51 of $Al/SO_4$ molar ratios. The operating cost for ettringite crystallization at optimized conditions was calculated to be 0.52 $/$m^3$. The significance of independent variables and their interactions were tested by analysis of variance. Scanning electron microscope (SEM) and SEM coupled with energy dispersive X-Ray spectroscopy results confirmed the formation of ettringite crystal and were used to describe its morphology features.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.3
• /
• pp.271-279
• /
• 2021

Ultrasound-assisted extraction (UAE) conditions, including extraction time, extraction temperature, and ethanol concentration, were optimized to increase the total flavonoid content (TFC), tyrosinase inhibitory activity (TIA), and collagenase inhibitory activity (CIA) of Spirulina platensis through central composite design (CCD). For the optimization of the three dependent variables, a quadratic regression model was derived from 17 experimental sets for the simultaneous maximization of TFC, TIA, and CIA. The predicted optimal UAE conditions were 44.0 min of extraction time, 82.8℃ of extraction temperature, and 96.0% of ethanol concentration. Under these conditions, 0.93 mg QE/g DM of TFC, 81.9% of CIA, and 92.1% of TIA were predicted. The CCD-based UAE optimization enabled an increase in TFC, CIA, and TIA, thereby confirming that the S. platensis extract can be used in the development of a cosmetic material with skin whitening and anti-wrinkle effects.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.9
• /
• pp.103-109
• /
• 2007

LCD (Liquid Crystal Display) is widely used electronic product. It needs too many processes such as PECVD (Plasma Enhanced Vapor Deposition), Sputtering, Photo-lithography, Dry etch. Each process is important but inspection process is more important because most companies emphasis on the six sigma. Recently, LCD inspection system is composed with inlet, inspector, outlet air pads. LCD is inspected on air pad which is shooting air from air hole. This paper studies on pad design of air bearing for LCD inspection to minimize LCD fluctuation. This design is able to reduce fluctuation and then satisfies CCD inspectional range. Also inspection pad needs to adequate stable area.

• Journal of Astronomy and Space Sciences
• /
• v.12 no.1
• /
• pp.54-65
• /
• 1995

We present a design study for a remote sensing camera system which can be operated in multi-channel mode simultaneously with several bandpass filters. The camera control electronics is based on the multiplexed driving concept, which can provide a variety of flexibility for system control parameters and its individual optimisation. The design can also be applied to any system with linear sensors or frame sensors according to its functional requirements. The system design parameters have been examined, including modification of driving waveforms for different types of sensors, waveforms for low-nosie readout circuit in analog chain, and synchronisation with other signal processing.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.167-170
• /
• 2000

Recently the sub-micron structured substrates of 0.74 ${mu}ell$ track pitch and 800 $\AA$groove depth are required for DVD-RAM and the track pitch is expected to be narrower as the need for the information storage density is getting higher. For the accurate replication of the land-groove structure in the stamper to the plastic substrates it is important to control the injection -compression molding process such that the integrity of the replication for the land-groove structure is maximized. in the present study polycarbonate substrates were fabricated by injection comression molding and the land-groove structure regarded as one of mold temperature and the compression pressure on the integrity of the replication were examined experimentally. An efficient design methodology using the response surface method (RSM) the central composite design(CCD) technique and the analysis-of-variance (ANOVA) was developed to obtain the optimum processing conditions which maximize the integrity of the replication with a limited number of experiments.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.965-970
• /
• 2015

This paper uses response surface methodology as the optimization method of torque of multi-DOF deflection type PM motor. Firstly, the application of Taguchi algorithm selects structural parameters affecting the motor torque largely which simplifies the optimization process greatly. Then, based on the central composite design (CCD), response surface equation numerical model is constructed by the finite element method. With the aid of experiment design and analysis software, the effects of the interaction among factors on the index are analyzed. The results show that the analytical method is efficient and reliable and the experimental results can be predicted by response surface functions.

• Food Science and Biotechnology
• /
• v.18 no.2
• /
• pp.442-448
• /
• 2009

In this study Bacillus subtilis PTCC 1023 was used for the production of protopectinase using soybean based media. The use of isolated soybean protein (ISP) and soybean flour resulted in similar protopectinase production and growth rates. The effect of medium composition on protopectinase production was studied using central composite design (CCD) methodology. The change in the concentration of ISP (1-7%), glucose (0-10%), and phosphate (0.1-0.3 M) was found to affect the protopectinase activity (response variable) after 24 hr of cultivation. In the range studied, ISP and glucose had a negative effect on the response variable, whereas phosphate had a positive effect. A statistically significant interaction was identified between phosphate and ISP, suggesting that correct optimization of medium formulation in this case can only be obtained using factorial design of experiments. Protopectinase activity exceeding 215 U/mL was obtained in a medium containing 4% ISP, 0.3M phosphate, and no added sugar.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.163-164
• /
• 2000

We discuss the design and fabrication of CCD or C-MOS imaging lenses with hybrid diffractive / refractive optics. The hybrid lenses are made of optical grade plastic materials. We have been able to significantly reduce the number of elements while maintaining very high optical quality. This paper describes the conception, design, fabrication and evaluation of hybrid lenses in comparison with conventional refractive lenses. The new lens has excellent optical quality, very light weight, compact size and low manufacturing cost.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.4
• /
• pp.43-48
• /
• 2015

In this study, a method for optimal design of impeller shroud for centrifugal compressor using response surface method (RSM) and multi-objective genetic algorithm (MOGA) was studied. Numerical simulation was conducted using ANSYS CFX with various configurations of shroud. Each of the design parameters was divided into 3 levels. Total 15 design points were planned by central composite design (CCD) method, which is one of the design of experiment (DOE) techniques. Response surfaces based on the results of DOE were used to find the optimal shape of impeller shroud for high aerodynamic performance. The whole process of optimization was conducted using ANSYS Design Xplorer (DX). Results showed that the isentropic efficiency, which is the main performance parameter of the centrifugal compressor, was increased 0.4% through the optimization.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.530-535
• /
• 2019

In this study, an optimization for the emulsification process with coconut oil and sugar ester was performed in conjunction with the central composite design (CCD) model of response surface methodology (RSM). Response values for the CCD model were the viscosity of the emulsion, mean droplet size, and emulsion stability index (ESI) after 7days from the reaction. On the other hand, the emulsification time, emulsification rate, and amount of emulsifier were selected as quantitative factors. According to the result of CCD, optimum conditions for the emulsification were as follows; the emulsification time of 22.63 min, emulsification speed of 6,627.41 rpm, and amount of emulsifier of 2.29 wt.%. Under these conditions, the viscosity, mean droplet size, and emulsion stability index (ESI) after 7 days from reaction were estimated as 1,707.56 cP, 1877.05 nm, and 93.23%, respectively. The comprehensive satisfaction of the CCD was indicated as 0.8848 with an average error of $1.2{\pm}0.1%$ from the experiment compared to that of the theoretical one. Overall, a very low error rate could be obtained when the central composite model was applied to the optimized coconut oil to water emulsification.