• Journal of the Korean Wood Science and Technology
• /
• 제23권3호
• /
• pp.16-22
• /
• 1995

The profiles of the heating temperature in three water vat temperatures (55, 66 and 77$^{\circ}C$) and the cooling temperature under the average ambient temperature of 3$^{\circ}C$ in 4 and 10cm depths from surface at the center of veneer bolts length showed similar patterns for Japanese larch (Larix leptolepis). Dahurian larch (Larix gmelinei) and Radiata pine (Pinus radiata). The difference of these core temperatures of 10cm depth from surface varied proportionally with the increase of vat temperatures. The average heating time based on final core temperature of 6$^{\circ}C$ lower than vat temperature required about 14.5 hours in vat temperature of 55$^{\circ}C$ and 13.5 hours in vat temperature of 66and 77$^{\circ}C$. Each internal temperature of 4 and 10cm depths from surface started to decrease from the beginning of cooling and after about two hours.

• 한국의학물리학회지:의학물리
• /
• 제17권4호
• /
• pp.224-231
• /
• 2006

본 연구에서는 MCNPX 코드를 사용하여 6 MeV 전자선의 에너지분포를 계산하였다. 이를 위하여 선형가속기(ML6M; Mitsubishi, Japan)의 헤드를 모델화하였다. 전자선의 초기에너지 분포는 가우시안으로 가정하였으며, 이 때 평균에너지는 측정과 계산으로 구한 $R_{50}$과 공기중 선량프로 파일을 평가하여 결정하였다. 결정된 빔 변수를 적용하여 선형가속기 헤드속 주요 위치에서의 전자선 에너지분포를 계산하였다. 어플리케이터 출구에서의 광자에 대한 에너지분포를 이용하여 깊이선량률에서 오염광자의 영향을 분석하였다.

• 대한기계학회논문집A
• /
• 제32권1호
• /
• pp.54-62
• /
• 2008

In this paper the fretting wear of press-fitted specimens subjected to a cyclic bending load was simulated using finite element analysis and numerical method. The amount of microslip and contact variable at press-fitted and bending load condition in a press-fitted shaft was analysed by applying finite element method. With the finite element analysis result, a numerical approach was applied to predict fretting wear based on modified Archard's equation and updating the change of contact pressure caused by local wear with influence function method. The predicted wear profiles of press-fitted specimens at the contact edge were compared with the experimental results obtained by rotating bending fatigue tests. It is shown that the depth of fretting wear by repeated slip between shaft and boss reaches the maximum value at the contact edge. The initial surface profile is continuously changed by the wear at the contact edge, and then the corresponding contact variables are redistributed. The work establishes a basis for numerical simulation of fretting wear on press fits.

• 한국환경생물학회:학술대회논문집
• /
• 한국환경생물학회 2004년도 학술대회
• /
• pp.26-26
• /
• 2004

This study was conducted to evaluate the characteristics of dissolved orgamc matters based on their origins. The dissolved organic carbon(DOC) represents an index for dissolved organic matter and basically regarded as a source of organic pollution. The monthly variations and vertical profiles of dissolved organic carbon(DOC) in Kumoh reservoir were surveyed from May 2001 to April 2002. In addition, other areas such as river, reservoir, sewage and industrial wastewater were also surveyed in summer 2001. Kumoh reservoir was divided with depth into three layers .: epilimnion, metalimnion and hypolimnion. The proportion of total DOC(T-DOC) was classified by labile DOC(L-DOC) and refractory DOC(R-DOC) on the basis of long-term incubation. DOC of freshwater and Kumoh reservoir was ranged to be 1.6~4.1 mgC/L and 2.1~4.0 mgC/L, respectively. L-DOC accounted for 3~30% of DOC from watershed. Therefore, refractory dissolved organic carbon(R-DOC) was major component of DOC in the watershed. The decomposition rate(k) ranged from 0.008 $d^{-1}$ to 0.083 $d^{-1}$ in Kumoh reservoir. The highest decomposition rate(k) was observed at River Hoein III freshwater. Therefore, modified total organic carbon analyzer is needed to be applied for effective management of dissolved organic matter.

• 대한조선학회논문집
• /
• 제34권3호
• /
• pp.1-8
• /
• 1997

두개의 서로 다른 밀도를 가지는 유체의 경계면에서 발생하는 내부고립파의 특성에 대하여 검토하였다. 해밀톤원리를 이용하여 내부고립파 문제의 지배방정식을 얻었다 이 지배방정식을 이용하여 고립파의 파고와 전파속도의 관계식을 얻었으며 계산된 전파속도는 실험 결과와 잘 일치하는 것을 보였다. 내부고립파가 전파 가능한 속도 영역이 존재하며, 전파속도의 최소값과 최대값을 두 층의 수심비와 밀도비의 함수로 나타내었다. 파고가 주어진 경우 KdV방정식에 의해서 계산된 전파속도는 실제보다 큰 값을 주며, 전파속도를 가지고 파고를 계산한 경우에는 실제보다 작은 값을 준다.

• 한국수자원학회논문집
• /
• 제46권7호
• /
• pp.767-781
• /
• 2013

본 연구에서는 수로가 비대칭으로 연결되어 있는 합류부 및 합류부 주위에서의 홍수흐름특성에 대해 수리모형실험 및 수치모의를 통해 분석을 수행하였다. 본 연구에서 적용된 수치모형은 상업용 3차원 CFD 모형인 ANSYS CFX(ver. 14)이다. 수로 내로 유입되는 유량변화에 따른 수리모형실험과 수치모의에 의한 합류부 및 합류부 주위에서의 수심분포에 대한 측정된 결과와 모의된 결과를 비교한 결과 비교적 잘 일치하는 것으로 나타났다. 합류부와 연결된 네 개의 수로중 물이 유입되는 두개 수로 방향에 따라 합류부 및 합류부 주위에서의 수심분포의 양상은 달라지며, 수로내로 유입되는 유량의 증가에 따라서도 많은 차이가 발생된다는 것을 확인하였다.

• 한국재료학회지
• /
• 제14권6호
• /
• pp.436-442
• /
• 2004

Elastic and plastic deformation behaviors of the high purity aluminum and the silica glass were studied using nanoindentation and finite element analysis(FEA) techniques. Berkovich- and cone-type indenters were used for the nanoindentation test. Deformation behaviors and nanoindent profiles of elastic, elastic-plastic or plastic materials were clearly visualized by FEA simulation. Effects of the penetration depth and strain hardening on the deformation behavior were examined. Pile-up and sink-in behaviors were studied by using FEA technique. Degree of pile-up or sink-in was found to be a function of the ratio of elastic modulus to yield strength of materials. FEA was found to be an effective method to study deformation behaviors of materials under nanoindentation, especially in the case when pile-up or sink-in phenomena occurred.

• 반도체디스플레이기술학회지
• /
• 제10권4호
• /
• pp.61-64
• /
• 2011

In order to grow the crystalline solar cells industry continuously, development of alternate low-cost manufacturing processes is required. Plasma doping system is the technique for introducing dopants into semiconductor wafers in CMOS devices. In photovoltaics, plasma doping system could be an interesting alternative to thermal furnace diffusion processes. In this paper, plasma doping system was applied for phosphorus doping in crystalline solar cells. The Plasma doping was carried out in 1~4 KV bias voltages for four minutes. For removing surface damage and formation of pn junction, annealing steps were carried out in the range of $800{\sim}900^{\circ}C$ with $O_2$ ambient using thermal furnace. The junction depth in about $0.35{\sim}0.6{\mu}m$ range have been achieved and the doping profiles were very similar to emitter by thermal diffusion. So, It could be confirmed that plasma doping technique can be used for emitter formation in crystalline solar cells.

• 지구물리
• /
• 제8권2호
• /
• pp.63-66
• /
• 2005

전 지구적 환경 모니터링을 위한 빙하 시추의 예비 탐사로서 남극 리빙스톤섬에서 GPR (Ground Penetrating Radar) 탐사를 실시하였다. 탐사지역은 세종기지가 위치한 킹죠지섬으로부터 남서쪽으로 80 km 위치한 곳으로 해발 340 m의 Mt. Charra 부근에 위치한다. 총 5개의 측선을 탐사했으며 3개의 반사법과 2개의 CMP(Common Midpoint) 방법을 실시하였다. 탐사결과 연구지역에서 빙하층은 전자기파의 속도와 반사단면의 특징으로 3개로 나누었다. 빙하의 두께는 80∼110 m에 이르는 것으로 추정되고 층에 따라 빙하 내부에 다량의 물과 화산재를 포함하고 있는 것으로 해석된다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2008년도 공동학술대회
• /
• pp.113-118
• /
• 2008

Among the geophysical methods, Ground Penetrating Radar (GPR) and Electrical Resistivity Tomography (ERT) comprise the most promising techniques in resolving buried archaeological structures in urban territories. In this work, two case studies which involve an integrated geophysical survey employing the surface three dimensional (3D) ERT and GPR techniques, in order to archaeologically characterize the investigated areas, are presented. Totally more than 4000 square meters were investigated from the test field sites, which are located at the centre of two of the most populated cities of the island of Crete, in Greece. The ERT and the GPR data were collected along dense and parallel profiles. The subsurface resistivity structure was reconstructed by processing the apparent resistivity data with a 3D inversion algorithm. The GPR sections were processed with a systematic way applying specific filters to the data in order to enhance their information context. Finally, horizontal depth slices representing the 3D variation of the physical properties were created and the geophysical anomalies were interpreted in terms of possible archaeological structures. The subsequent excavations in one of the sites verified the geophysical results, enhancing the applicability of ERT and GPR techniques in the archaeological exploration of urban territories.