• Journal of Life Science
• /
• v.23 no.3
• /
• pp.443-447
• /
• 2013

This study was conducted to investigate the antimicrobial and anti-oral malodor effect of Schizandra chinensis extracts against oral pathogens. S. chinensis methanol (MeOH) extract showed better antimicrobial activities against oral pathogens than the S. chinensis hot water extract did. In particular, ethylacetate (EA) fraction of S. chinensis MeOH extract had the greatest effects against Streptococcus mutans, S. sanguinis, S. salivaris subsp. thermophols and Porphyromons gingivalis. The anti-malodor effect of S. chinensis against the generation of volatile sulfur compounds (VSC), such as hydrogen sulfide, methyl mercaptan, and dimethyl sulfide, was estimated using oral chroma in a practical study. The results showed that 2% MeOH extract of S. chinensis against the production of hydrogen sulfide, methyl mercaptan, and dimethyl sulfide had inhibitions of 91.15, 78.72 and 71.58%, respectively. These results showed that Schizandra chinensis extract had antimicrobial activity against several oral pathogens and exhibited significant effects on the inhibition of VSCs. Thus, Schizandra chinensis extract could be an alternative to available synthetic chemicals and oral hygiene products.

• Journal of Technologic Dentistry
• /
• v.37 no.3
• /
• pp.121-127
• /
• 2015

Purpose: This study was intended to investigate the effect of applying liner for chemical bonding and physical surface roughness created on zirconia by using a sandpaper before sintering on the bond strength between the two materials. Methods: Zirconia blocks were cut using a low-speed cutter. Plate-shaped specimen($6mm{\times}6mm{\times}3mm$) was fabricated by sintering after giving surface roughness according to four kinds of sandpapers. Depending on whether or not to use liner, 60 specimens were divided into two groups ZN(non-liner), ZL(liner), and the two groups were subdivided into four groups respectively in accordance with sandpaper used, totaling eight groups (n=10). The surface roughness (Ra) values and shapes before sintering were observed, and shear bond strength after pressing ceramic plasticity was measured with a universal testing machine. For a test of the significance, a one-way ANOVA was performed, and Tukey's multiple comparison test was conducted. Results: The observation of the surface roughness was SB04($2.22{\pm}1.16{\mu}m$), SB08($2.98{\pm}0.33{\mu}m$), SB12($2.44{\pm}1.32{\mu}m$), SB20($2.34{\pm}0.59{\mu}m$) and SA04($2.34{\pm}0.67{\mu}m$), SA08($1.28{\pm}0.90{\mu}m$), SA12($2.03{\pm}1.60{\mu}m$), SA20($2.19{\pm}1.73{\mu}m$). In the case of ZN Group, the shear bond strength was ZN04($23.26{\pm}3.83MPa$), ZN08($21.76{\pm}2.33MPa$), ZN12($20.49{\pm}3.01MPa$), ZN20($24.98{\pm}4.22MPa$)(p<0.05). As for ZL Group, the shear bond strength was ZL04($25.09{\pm}5.67MPa$), ZL08($22.98{\pm}2.26MPa$), ZL12($21.54{\pm}5.70MPa$), ZL20($23.98{\pm}3.23MPa$)(p<0.05). Conclusion: The research results showed that the bond strength of Zirconia core and Pressing ceramic was further improved by physical surface treatment before sintering, rather than by chemical bonding through liner surface treatment.

• Journal of Convergence for Information Technology
• /
• v.10 no.8
• /
• pp.223-228
• /
• 2020

Objective of this study was to compared the amount of bacteria in the toothbrush according to the management method of the toothbrush in use and the acidity of intraoral bacteria. Toothbrushes in use in more than one month of 50 healthy adults were collected and the number of bacteria and pH of the toothbrushes were measured. When the number of brushings per day was 4, the pH 4.97 and the microbial numbers was the lowest at 42.16(104×CFU/ml). When the replacement period of the toothbrush was 1 month, the pH 5.35 and the microbial numbers was the lowest at 19.80(104×CFU/ml). When stored in the bathroom, the pH 4.78, and the microbial numbers was highest at 149.46(104×CFU/ml). As a result, in order to block the germs of the toothbrush, it is necessary to develop a method that can easily disinfect the contaminated toothbrush at home. In addition, I think that it is necessary to educate about the proper brush cleaning and storage method when teaching brushing.

• Korean Parent-Child Health Journal
• /
• v.4 no.2
• /
• pp.56-72
• /
• 2002

Web sites on the internet are getting major resources to gain information related to child care. Though the numerous web sites deliver child care information, they have never been evaluated with criteria before. The purpose of this study is to identify existence and organization of child care portal sites and to analysis their contents, therefore to suggest guidelines for parents. The survey was conducted from Sep. 1. to Oct. 30., 2001. by means of Lycos Korea and Daum search engine and finally 45 portal sites related to child care were selected eliminating the commercial and personal homepages. The results were as follows: 1. Most of the sites(95.6%) were operated by corporations without registration(82.2%). Consultants were mostly professional (71.1%). 2. The contents were analyzed 4 categories including 19 themes. 3. Diet & Nutrition category include weaning food, breast feeding, bottle feeding and snack. The recipe and type of weaning food on months were topped(64.44%). 4. Infant Care category include bathing, sleeping, clothes, skin care and cord care. bathing method and heat of bathing water were topped(44.44%). 5. Growth & Development category was consisted of developmental characteristics, dental growth, play & exercise and learning & guidance. Developmental stage and motor development were topped (62.22%). 6. Health maintenance & promotion category was consisted of emergency care, prevention of accidents, vaccination, common pediatric disease and parental role. Care of diarrhea, constipation and fever, and precautions for vaccination were topped(48.89%).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3230-3242
• /
• 2015

In this study, in an attempt to elucidate the relevance and the association between AUDIT level and health related indices such as obesity-related indices (BMI, waist circumference, body fat percentage), serum liver-enzyme levels (AST, ALT, GGT, total bilirubin) and serum lipid levels (TC, TG, HDL-C, LDL-C), data about including results of health checkup examination and questionnaire from 558 male examinees of 30-79 years old, who received a comprehensive health examination in the health promotion center of a university hospital during the period of January 1 to December 31, 2012, was analysed. As a results, the distribution of AUDIT rating of subjects was Zone I 58.2%, Zone II 25.3%, Zone III 7.0%, and Zone IV 9.5%. And AUDIT levels have significant relevance with age, smoking, body fat, GGT and TG. Especially, for the waist circumference, GGT and TG, the odds ratio indicating abnormality significantly increased in the higher AUDIT groups (Zone II~Zone IV) than a low-grade group (Zone I). This suggests that drinking problem with a high AUDIT level has a significant relevance with an abnormal increase of indices for obesity, serum liver-enzyme levels, serum lipid levels.

• Korean Journal of Materials Research
• /
• v.27 no.12
• /
• pp.705-709
• /
• 2017

The electronic and optical characteristics of molybdenum disulphide ($MoS_2$) film significantly vary with its thickness, and thus a rapid and accurate estimation of the number of $MoS_2$ layers is critical in practical applications as well as in basic researches. Various existing methods are currently available for the thickness measurement, but each has drawbacks. Transmission electron microscopy allows actual counting of the $MoS_2$ layers, but is very complicated and requires destructive processing of the sample to the point where it will no longer be useable after characterization. Atomic force microscopy, particularly when operated in the tapping mode, is likewise time-consuming and suffers from certain anomalies caused by an improperly chosen set point, that is, free amplitude in air for the cantilever. Raman spectroscopy is a quick characterization method for identifying one to a few layers, but the laser irradiation causes structural degradation of the $MoS_2$. Optical microscopy works only when $MoS_2$ is on a silicon substrate covered with $SiO_2$ of 100~300 nm thickness. The last two optical methods are commonly limited in resolution to the micrometer range due to the diffraction limits of light. We report here a method of measuring the distribution of the number of $MoS_2$ layers using a low voltage field emission electron microscope with acceleration voltages no greater than 1 kV. We found a linear relationship between the FESEM contrast and the number of $MoS_2$ layers. This method can be used to characterize $MoS_2$ samples at nanometer-level spatial resolution, which is below the limits of other methods.

• Current Research on Agriculture and Life Sciences
• /
• v.5
• /
• pp.173-184
• /
• 1987

Anethole, eugenol, isoeugenol, safrole and isosafrole are ingredients of refined oils which are obtained from some plants and their chemical structures are very similar. They are mainly used as a flavoring agent, food additive, dental analgesics and for many drugs. But, there is no report about their effect on the intestinal motility. The result of examining the effect, potency and mode of action of anethole, eugenol, isoeugenol, safrole and isosafrole on motility of isolated rabbit jejunum segment, are as follows : 1. Single administration of anethole, eugenol, isoeugenol, safrole and isosafrole showed the inhibition of motility of isolated rabbit jejunum segment, degree of which was various. The $pD_2$ values of isoeugenol, isosafrole, eugenol, safrole and anethole in isolated rabbit jejunum segment were 4.22, 4.18, 4.17, 4.15 and 3.82 (in the descending order of potency). 2. The contracted rabbit jejunum segment : by carbachol, pilocarpine, barium chloride and histarmine were relaxed by five essential oil. 3. The relaxed rabbit jejunum segment by anethole was not recovered by carbachol, pilocarpine, barium chloride and histamine. The relaxed rabbit jejunum segment by eugenol, isoeugenol, safrole and isosafrole were recovered by carbachol, pilocarpine and barium chloride but partially recovered by histamine. 4. Judging from the facts above, it is thought that five essential oil are inhibit the motility of isolated rabbit jejunum segment by neurotropic and musculotropic action.

• Journal of Convergence for Information Technology
• /
• v.11 no.10
• /
• pp.239-249
• /
• 2021

The purpose of this study is to verify the mediating effects of psychological flexibility on the relationship between emotional dissonance and mental health(depression, anxiety, somatic symptoms) in university administration staff. For this study, a sample of 191 university administration staff completed the questionnaires. The data was analyzed using the SPSS program and Sobel Test. The results of the analysis are as follows: 1. Most of the university administration staff had difficulties with emotional dissonance(52.36%), depression(47.12%), anxiety(58.12%), and somatic symptoms(62.83%). 2. The risk group of emotional dissonance had a significantly higher level of depression, anxiety and somatic symptoms compared with the normal group. 3. Emotional dissonance and psychological flexibility had a significant effect on depression, anxiety and somatic symptoms. 4. The mediating effects of psychological flexibility on the relationship between emotional dissonance and mental health(depression, anxiety, somatic symptoms) was verified. Finally, We suggested the need to intervene in emotional labor and mental health in university administration staff and psychological flexibility as an intervention and prevention method.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.288-295
• /
• 2019

Passive fit of prosthesis is an essential property of implant supported prosthesis for long term success and minimization of complications. And the property is determined mostly by fabrication procedure. There were limitations of extensive implant prosthesis because conventional casting method generate contraction error of long span prosthesis. However, Computer-aided design/Computer-aided manufacturing (CAD/CAM) technology of 3D printing and milling metal framework can overcome those limitations. This case is a full mouth rehabilitation using extensive implant fixed prosthesis. Removable interim prosthesis was made for esthetic, functional evaluation and a guide for implant insertion. After the insertion, implant fixed interim prosthesis was delivered. After additional evaluation and adjustment, final prosthesis was designed with CAD, the fabricated with CAM. Milling technique was used for anterior screw type implant superstructure and 3D printing technique was used for the anterior and posterior implant copings. Fit of the final restoration was favorable. The practitioner and patient were both esthetically and functionally satisfied with the final result.

• Journal of Digital Convergence
• /
• v.17 no.9
• /
• pp.185-192
• /
• 2019

The introduction of smart technology provides accuracy, safety, and efficiency to both physicians and patients. Although interest in a clear aligner is increasing among users worldwide, the current clear aligner requires a visit to the hospital every one or two weeks for replacement, which is a very cumbersome process. There is also confusion among dentists and patients because about 40 to 80 devices are made, and calibration is done based on the order and duration of the clear aligner. Therefore, this study designed and developed a clear aligner management system so that communication between the patient and dentist can be smoothly performed by inserting the QR code into the transparent correction device. As a result, the size of the QR code was recognized as $6{\ast}6mm^2$ which can be used in the oral and the recognition distance was 100% within 12 cm. Since the dentist can remotely manage the patient with the proposed system and improve the correction effect, it is possible to manage patients abroad, as well as domestically.