• 한국수산과학회지
• /
• 제47권5호
• /
• pp.588-596
• /
• 2014

To examine the influences of water temperature and stocking density on feeding, growth and blind-side hypermelanosis of the starry flounder Platichthys stellatus, we performed an experiment with fry at two densities: 2 and 8 fish/L. The fry had a total length of $3.2{\pm}0.1cm$, body weight $0.6{\pm}0.1g$, and pigmented patches (pigmented ratio $2.6{\pm}0.4%$) on the blind side. Duplicate experiments were conducted in 93.7 L glass tanks for 120 days, from July to November. We determined daily food intake (DFI), food efficiency (FE), growth, survival rate, ratio of hypermelanic fish, and pigmented area rate on the blind side at 60-day intervals. The DFI was less than 50 mg/fish/day, and growth was delayed from July to September (water temperature [WT]> $20^{\circ}C$). After October, when WT < $20^{\circ}C$, the DFI increased significantly and the growth was accelerated, suggesting that the rearing temperature of starry flounder in artificial facilities should be < $20^{\circ}C$. While the FE, and survival did no differ between the two density groups, DFI and growth were significantly higher at 2 fish/L than at 8 fish/L. There was no difference in the pigmented area ratio between the two density groups. Although the hypermelanosis was not correlated with body size, the malpigmentation increased with growth. These results suggest that a high stocking density is not the main cause of blind-side hypermelanosis, although it can accelerate hypermelanosis in the starry flounder.

• 한국의학물리학회지:의학물리
• /
• 제32권4호
• /
• pp.165-171
• /
• 2021

Purpose: This study aimed to evaluate the effect of collimator width on effective atomic number (EAN), relative electron density (RED), and stopping power ratio (SPR) measured by dual-layer dual-energy computed tomography (DL-DECT). Methods: CIRS electron density calibration phantoms with two different arrangements of material plugs were scanned by DL-DECT with two different collimator widths. The first phantom included two dense bone plugs, while the second excluded dense bone plugs. The collimator widths selected were 64 mm×0.625 mm for wider collimators and 16 mm×0.625 mm for narrow collimators. The scanning parameters were 120 kVp, 0.33 second gantry rotation, 3 mm slice thickness, B reconstruction filter, and spectral level 4. An image analysis portal system provided by a computed tomography (CT) manufacturer was used to derive the EAN and RED of the phantoms from the combination of low energy and high energy CT images. The EAN and RED were compared between the images scanned using the two different collimation widths. Results: The CT images with the wider collimation width generated more severe artifacts, particularly with high-density material (i.e., dense bone). RED and EAN for tissues (excluding lung and bones) with the wider collimation width showed significant relative differences compared to the theoretical value (4.5% for RED and 20.6% for EAN), while those with the narrow collimation width were closer to the theoretical value of each material (2.2% for EAN and 2.3% for RED). Scanning with narrow collimation width increased the accuracy of SPR estimation even with high-density bone plugs in the phantom. Conclusions: The effect of CT collimation width on EAN, RED, and SPR measured by DL-DECT was evaluated. In order to improve the accuracy of the measured EAN, RED, and SPR by DL-DECT, CT scanning should be performed using narrow collimation widths.

• 대한영양사협회학술지
• /
• 제21권3호
• /
• pp.181-193
• /
• 2015

This study investigated anthropometric and biochemical characteristics, nutrient intakes, and bone density of Korean elderly men (over 65 yrs). Data on bone density and anthropometric (height, weight, waist circumference, body mass index and blood pressure) and biochemical (total cholesterol, high-density lipoprotein (HDL)-cholesterol, low-density lipoprotein (LDL)-cholesterol, triglyceride and hemoglobin) characteristics, nutrient intakes, and nutrient density were obtained from the Fifth Korea National Health and Nutrition Examination Survey (KNHANES, 2008~2011). Subjects were categorized into smoking and non-smoking groups, and smoking groups were divided into three groups by smoking period (under 20 yrs, 21~40 yrs and over 41 yrs). Serum triglyceride concentrations of the smoking group aged 21~40 yrs were higher than those of other groups (P<0.01), whereas other biochemical factors were not different. Intake ratios of energy, protein, phosphorus and sodium in subjects were over 100% of Dietary Reference Intake for Koreans (KDRI). Nutrient densities according to intakes of thiamin, riboflavin, and niacin per 1,000 kcal were significantly different among the groups (P<0.05). Bone density of subjects decreased according to smoking period (T-score of total femur in non-smoking group -0.3108, and -0.2918, -0.4941, -0.6847 in smoking group, respectively). Ratio of osteoporosis was 38.1% in the non-smoking group and 44.4%, 51.1%, and 64.0% in the smoking group, respectively. The findings of the present study show that smoking may be associated with bone health, higher ratio of osteoporosis, and low nutrient density in elderly men. Therefore, practical and systematic non-smoking programs are required to improve the bone density of elderly men as well as maintain healthy bone levels and desirable lifestyle.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 토목섬유 학술발표회 논문집
• /
• pp.1-10
• /
• 1999

In the present study, laboratory pull-out tests with various geogrid shapes are carried out to investigate behavior characteristics of the geogrid. Also, an interface pullout formula is proposed for predicting and interpreting pullout test result. The analytical model is based on the assumption that the reinforcement is linear elastic during the pullout test. And then, maximum pullout force, frictional resistance and active length for each of the grid density ratio are predicted based on the interface pullout formula. The predicted results were compared with those of pullout tests, and showed in general good agreements.

• Journal of the Korean Data and Information Science Society
• /
• 제7권2호
• /
• pp.189-201
• /
• 1996

In this paper, we study the saddlepoint approximations for the ratio of independent random variables. In Section 2, we derive the saddlepoint approximation to the density. And in Section 3, we derive two approximation formulae for the tail probability, one by following Daniels'(1987) method and the other by following Lugannani and Rice's (1980). In Section 4, we represent some numerical examples which show that the errors are small even for small sample size.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.21-25
• /
• 2005

In order to implement high pixel density in AMLCDs, high aperture ratio is a very important design factor. We have implemented VGA panels with IPS and TN modes. IPS mode is a very attractive solution to meet the requirement for mobile phone displays. It provides much higher aperture ratio as well as wider viewing angle at extremely high pixel density over 400 ppi.

• Journal of the Korean Data and Information Science Society
• /
• 제10권2호
• /
• pp.415-428
• /
• 1999

In this paper, we study the saddlepoint approximations for the ratio of two independent sequences of random variables. In Section 2, we review the saddlepoint approximation to the probability density function. In section 3, we derive an saddlepoint approximation formular for the tail probability by following Daniels'(1987) method. In Section 4, we represent a numerical example which shows that the errors are small even for small sample size.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.49-55
• /
• 2012

본 연구에서는 인공경량골재의 주요 물성인 밀도 및 흡수율의 성능 향상을 위하여 융제 종류 및 첨가율에 따른 밀도 및 흡수율 특성을 검토하였다. 실험결과, 화학제품의 융제 사용에 관한 특성으로, $Na_2CO_3$ 및 $CaSO_4$는 경우 낮은 소성온도에서 소성이 가능하나, 흡수율이 증가하였고, $CaCO_3$, NaOH, $Fe_2O_3$는 첨가율이 증가할수록 흡수율은 낮아졌으나, 절건밀도가 높아지는 것으로 나타나 융제로서 부적합하였다. $Na_2SO_4$의 사용한 경우에는 절건밀도 $1.35{\sim}1.50g/cm^3$와 상대적으로 낮은 흡수율로 융제로서 가장 적합하였다. 산업부산물의 융제 사용에 관한 특성으로 유리연마 슬러지는 절건밀도 $1.45{\sim}1.55g/cm^3$ 및 흡수율 9~12 %로 흡수율이 높게 나타났다. 고로슬래그 미분말은 첨가율이 증가할수록 밀도는 높아지고 흡수율은 낮아지는 것으로 나타났다. 산화슬래그는 첨가율 10 %에서 절건밀도 $1.46g/cm^3$, 흡수율 8,5 %로 낮은 절건밀도와 흡수율을 갖는 양질의 인공경량골재를 제조할 수 있었다.

• 한국농공학회지
• /
• 제11권1호
• /
• pp.1604-1615
• /
• 1969

본(本) 실험(實驗)은 cement mortar를 고산용액에 침지(浸漬)시켜 산(酸)의 작용(作用)에 의(依)한 모르타르의 부식(腐蝕)이 모르타르의 물리적성질(物理的性質)에 미치는 영향(影響)을 구명(究明)하여 보다 내산성(耐酸性) 모르타르 또는 콘크리트의 배합설계(配合設計)에 기초자료(基礎資料)를 제시(提示)하고저 시도(試圖)하였던 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 가. 공시체(供試體)는 5cm 입방체(立方體)의 모르타르로서 그 배합비(配合比)(중량(重量))는 1:1, 1:3, 1:5, 1:7, 1:10의 5종(種)을 제작(製作) 사용(使用)하였다. 나. 물리시험(物理試驗)에서는 재령(材令) 7일(日), 28일(日), 3개월(個月), 6개월(個月)의 압축강도시험(壓縮强度試驗)과 5시간(時間) 자비(煮沸)의 흡수율시험(吸水率試驗)을 하였다. 다. 산성시험(酸性試驗)에서는 0.1N-Hcl 용액(溶液)을 사용(使用)하고 7일간격(日間隔)으로 감량(減量)을 7주간(週間) 계속측정(繼續測定)하였다. 라. 물리적(物理的) 제성질(諸性質)인 배합비(配合比), w/c/비(比), 흡수율(吸水率), 압축강도(壓縮强度) 및 밀도간(密度間)의 상호관계(相互關係)는 다음식(式)으로 표시(表示)되었다. 1. 배합비(配合比)와 흡수율(吸水率)과의 관계(關係) Y=1.036X+13.53 여기서 Y : 흡수율(吸水率)(%), X: 배합비(配合比) 2. 배합비(配合比)와 w/c 비(比)와의 관계(關係) Y=0.214+0.204X 여기서 Y:w/c 비(比), X: 배합비(配合比) 3. w/c 비(比)와 흡수율(吸水率)과의 관계(關係) Y=5.01X+12.53 여기서 Y: 흡수율(吸水率)(%) X: w/c비(比) 4. 밀도(密度)와 흡수율(吸水率)과의 관계(關係) Y=50.6-0.0176X 여기서 Y: 흡수율(吸水率)(%) X: 밀도(密度)($kg/m^3$) 5. 밀도(密度)와 w/c 비(比)와의 관계(關係) Y=5.46-0.0024X 여기서 Y: w/c비(比) X: 밀도(密度)($kg/m^3$) 마. 7주간(週間) 0.1N-HCl 용액(溶液)에 침지후(浸漬後) 감량(減量)의 범위(範圍)는 배합비(配合比) 1:1에서 20.4%(最小), 1:10에서 9%(最大)이였다. 바. 감량(減量)과 물리적(物理的) 제성질(諸性質)과의 관계(關係)는 다음식(式)으로 표시(表示)되었다. 1. 감량(減量)과 배합비(配合比)와의 관계(關係) Y=8.59X+8.63 여기서 Y: 감량(減量)(%) X: 배합비(配合比)

• Journal of Korean Vacuum Science & Technology
• /
• 제4권4호
• /
• pp.112-121
• /
• 2000

The paper investigates electrical discharge properties in neon gas mixed with xenon. The breakdown temperature T$\sub$b/ and voltage V$\sub$b/ are obtained in terms of the gas mixture ratio X. It is shown that the breakdown voltage decreases, reaches the minimum value at X=0.02 and then increases again, as the mixture ratio X increases from zero to unity. Therefore, mixing the neon gas with a few percent of xenon is the most beneficial to reduce the breakdown voltage. Plasma density at breakdown in neon gas mixed with xenon is described in terms of the gas mixture ratio. The optimum value of mixture ratio for highest plasma density is found to be Xm=0.03. A preliminary experiment of AC-PDP is carried out for neon gas mixed with a few percent of xenon to verify some of the theoretical models. The experimental data agree qualitatively well with theoretical predictions.