• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.105-107
• /
• 2015

In this paper, we proposed LTD(Load Tolerance Density-distribution) algorithm using dynamic density for analyzing distribute routing path. MANET(Mobile Ad-hoc Networks) consists of the node that has a mobility. By the Mobility, the topology is exchanged frequently. To reduce the exchange of topology, the hierarchy network is studied. However, if the load is concentrated at the cluster head node, the communication is disconnected. the proposed algorithm measure the dynamic density of the node using poisson distribution. And this algorithm provides distribute routing path using dynamic density. The simulation results, the proposed algorithm shows improved packet delivery ratio than the compared algorithm.

• Transactions of the KSME C: Technology and Education
• /
• v.2 no.2
• /
• pp.105-111
• /
• 2014

Generally the lower part of the Earth's atmosphere, which is 20km above the ground, is called "air." The composition of this area is almost consistent consisting of nitrogen, oxygen, and other gases. Air density refers to the mass per unit volume of earth atmosphere. Though air is made of the mixed gases in a constant composition, the water vapor is one of the very changeable components. The density of moist air is lower than the dry one at the same temperature and pressure. As the density varies according to the pressure and temperature, this paper attempts to explore the main factors in the air quantity calculation by examining first the density calculation process according to the air property, and second the relation between the actual and standard air flow.

• Journal of Sensor Science and Technology
• /
• v.24 no.6
• /
• pp.385-391
• /
• 2015

In this paper, we propose a new method to infiltrate $Fe_3O_4$-nanoparticles into a porous silicon film and a monitoring technique to detect packing density of nanoparticles within the film. Recently, research to use porous silicon as a drug carrier or a new functional sensor material by infiltrating $Fe_3O_4$-nanoparticles has been extensively performed. However, it is still necessary to enhance the packing density and to develop a monitoring technique to detect the packing density in real time. In this light, we forcibly injected a nanoparticle solution into a rugate-structured free-standing porous silicon (FPS) film by applying a pressure difference between the two sides of the film. We found that the packing density by the pressure-infiltration method proposed in this paper is enhanced, relative to that by the previous diffusion method. Moreover, a continuous shift in wavelength of the rugate reflectance peak measured from the film surface was observed while the nanoparticle solution was being injected. By exploiting this phenomenon, we could qualitatively monitor the packing density of $Fe_3O_4$-nanoparticles within the FPS film with the injection volume of the nanoparticle solution.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.5 s.113
• /
• pp.70-77
• /
• 2005

The development of printable Hanji is regarded as an important work to create a new demand of Hanji in information-oriented era. Hanji has rougher surface, huger absorption of ink and lower optical properties and printabilities than common printing papers. Improving those shortcomings of Hanji is required to be printable Hanji. Sizing and calendering have known as a way to make properties of paper good. Accordingly, this research was performed to find out useful sizing agents for reforming its drawbacks. Four sizing agents (CMC, com starch, PVA, AKD) were used in this research. The optical properties and the printabilities of sized Hanji were tested. The obtained results were as follows. Based on concentration, each sizing agent was prepared. These were CMC(0.5, 1, $1.5\%$), corn starch(1, 2, $3\%$), PVA(1, 5, $10\%$), AKD(0.5, 0.1, $0.15\%$) respectively. After sizing, we performed calendering treatment with pressure of 0.5, $1\;kgf/cm^2$. All the sizing agents and calendering treatment improved the properties of Hanji to some extent. Particularly, com starch was good for gloss. In case of printability, $1\%$ AKD with $1\;kgf/cm^2$ was recommendable for typography ink density, $3\%$ com starch with $0.5\;kgf/cm^2$, inkjet ink density, $2\%$ com starch with $0.5\;kgf/cm^2$, inkjet ink girth. PVA and AKD without calendering were counter-effective agents for inkjet ink density. Printable Hanji is required to have not only better surface strength enough to appear non-picking, higher ink density and lower show-through than base paper but also the lowest ink girth in comparison with base paper. When referring to them, efficient sizing agents were regarded as $0.1\%$ AKD with $1\;kgf/cm^2$, calender pressure, for typography printing and $2\%$ com starch with $0.5\;kgf/cm^2$, calender pressure, for inkjet printing.

• International Journal of Computer Science & Network Security
• /
• v.22 no.11
• /
• pp.308-318
• /
• 2022

Noise is a serious issue. While sending images via electronic communication, Impulse noise, which is created by unsteady voltage, is one of the most common noises in digital communication. During the acquisition process, pictures were collected. It is possible to obtain accurate diagnosis images by removing these noises without affecting the edges and tiny features. The New Average High Noise Density Median Filter. (HNDMF) was proposed in this paper, and it operates in two steps for each pixel. Filter can decide whether the test pixels is degraded by SPN. In the first stage, a detector identifies corrupted pixels, in the second stage, an algorithm replaced by noise free processed pixel, the New average suggested Filter produced for this window. The paper examines the performance of Gaussian Filter (GF), Adaptive Median Filter (AMF), and PHDNF. In this paper the comparison of known image denoising is discussed and a new decision based weighted median filter used to remove impulse noise. Using Mean Square Error (MSE), Peak Signal to Noise Ratio (PSNR), and Structure Similarity Index Method (SSIM) metrics, the paper examines the performance of Gaussian Filter (GF), Adaptive Median Filter (AMF), and PHDNF. A detailed simulation process is performed to ensure the betterment of the presented model on the Mini-MIAS dataset. The obtained experimental values stated that the HNDMF model has reached to a better performance with the maximum picture quality. images affected by various amounts of pretend salt and paper noise, as well as speckle noise, are calculated and provided as experimental results. According to quality metrics, the HNDMF Method produces a superior result than the existing filter method. Accurately detect and replace salt and pepper noise pixel values with mean and median value in images. The proposed method is to improve the median filter with a significant change.

• Journal of the Korean Statistical Society
• /
• v.22 no.2
• /
• pp.235-247
• /
• 1993

The predictive density function of a potential future observation and its first four moments are obtained in this paper to study the effects of a non-normal prior of the unknown mean of a normal population. The derived predictive density function is modified to study changes in utility curves, used to choose the optimum treatment from a given set of treatments, at a given level of stimulus due to slight deviations from normality of the prior distribution. Numerical illustrations are provided to exhibit some effectsl.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.1
• /
• pp.91-98
• /
• 1993

This paper presents a class of Bayes estimation of component steady-state availability . Throughout this paper, we will denote the mean time between failure and the mean time between repair by MTBF and MTBR respectively. In section 2 , we investigated Bayes estimation of the steady-state availability for noninformative prior density function and in section 3, we compute Bayes estimation for conjugate prior density function.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.683-688
• /
• 1999

This paper describes design of equalizer chips of the read channel for high-density hard-disk drives. In order to meet increasing need of hard-disk drives, the read channel incorporates various PRML schemes. They require proper equalization to implement the efficient hardware of Viterbi decoders. This paper describes EPR-IV equalization for the read channel and a 200MHz analog FIR filter chip is presented which utilizes the sampled analog signal processing efficiently.

• MALSORI
• /
• no.54
• /
• pp.15-26
• /
• 2005

The aim of this paper was to analyze the lexical effects on spoken word recognition of Korean monosyllabic word. The lexical factors chosen in this paper was frequency, density and lexical familiarity of words. Result of the analysis was as follows; frequency was the significant factor to predict spoken word recognition score of monosyllabic word. The other factors were not significant. This result suggest that word frequency should be considered in speech perception test.

• Journal of applied mathematics & informatics
• /
• v.4 no.2
• /
• pp.469-476
• /
• 1997

In this paper we present a random number generation method which is one of the rejection methods, To accelerate ratio-of-uniform method we use an efficiency variable γ. After finding the optimal value of γwith respect to interesting distribution with pro-portional density random numbers can be generated in acceleration.