• 제목/요약/키워드: density function

검색결과 3,246건 처리시간 0.029초

밀도추정함수와 평균보정계수를 이용한 BWIM 알고리즘의 현장실험 적용 (Application for a BWIM Algorithm Using Density Estimation Function and Average Modification Factor in The Field Test)

  • 한아름샘;신수봉
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제15권2호
    • /
    • pp.70-78
    • /
    • 2011
  • 본 논문은 변형률 계측데이터를 사용하는 신뢰성 및 정확성을 증진된 BWIM(Bridge Weigh-In-Motion) 알고리즘을 개발하고, 이를 교량에 대한 다양한 실험을 통해 검증하고자 하는 것이다. 본 논문에서는 밀도추정함수와 평균보정계수를 이용한 BWIM 알고리즘을 제시한다. 밀도추정함수는 다축하중을 추정할 때 신뢰할 수 있게 적용할 수 있음을 입증하였으며, 평균보정계수는 이론 계산된 모멘트와 계측된 변형률에서 계산한 모멘트 사이의 전반적인 오차를 최소화하기 위해 적용된다. 개발된 알고리즘은 수치예제, 실내모형실험 그리고 다주형 합성교량에 대한 현장실험을 통해 성공적으로 검증하였다.

확률밀도함수를 이용한 피로균열 발생수명 예측에 관한 연구 (A Study on the Prediction of Fatigue Life by use of Probability Density Function)

  • 김종호
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제23권4호
    • /
    • pp.453-461
    • /
    • 1999
  • The estimation of fatigue life at the design stage is very important in order to arrive at feasible and cost effective solutions considering the total lifetime of the structure and machinery compo-nents. In this study the practical procedure of prediction of fatigue life by use of cumulative damage factors based on Miner-Palmgren hypothesis and probability density function is shown with a $135,000m^3$ LNG tank being used as an example. In particular the parameters of Weibull distribution taht determine the stress spectrum are dis-cussed. At the end some of uncertainties associated with fatigue life prediction are discussed. The main results obtained from this study are as follows: 1. The practical procedure of prediction of fatigue life by use of cumulative damage factors expressed in combination of probability density function and S-N data is proposed. 2. The calculated fatigue life is influenced by the shape parameter and stress block. The conser-vative fatigue design can be achieved when using higher value of shape parameter and the stress blocks divded into more stress blocks.

  • PDF

라이시안 감쇄 채널에서의 위상오류 분포 (On the Distribution of Phase Error in the Rician Fading Channel)

  • 김민종;한영열
    • 한국전자파학회논문지
    • /
    • 제13권8호
    • /
    • pp.797-803
    • /
    • 2002
  • 본 논문에서는 라이시안(Rician) 감쇄가 존재하는 채널 환경에서 협대역 잡음이 더하여진 경우에 대역 여파기를 통과한 수신신호의 위상오류에 대한 확률 밀도 함수를 유도하고 0차 모먼트가 1이 됨을 보임으로써 확률밀도 함수로서의 타당성을 검증한다. 일반적으로 감쇄 환경에서 시스템의 오류 확률은 먼저 가산성 백색 가우시안 잡음(AWGN : Additive White Gaussian Noise)만이 존재할 때의 오류 확률을 구한 후, 그 결과 식을 해당 감쇄에 대한 확률 밀도 함수로 평균을 취하여 구한다. 하지만 본 논문에서는 감쇄 환경에서의 수신 신호에 대한 위상 오류식을 구한 다음, 그 식을 한번의 이중 적분을 취함으로써 오류 확률을 구하게 된다.

지표면의 시공간적 변화를 고려한 비점오염원 저감 저류지 최적용량산정 (Optimal Volume Estimation for Non-point Source Control Retention Considering Spatio-Temporal Variation of Land Surface)

  • 최대규;김진관;이재관;김상단
    • 한국물환경학회지
    • /
    • 제27권1호
    • /
    • pp.9-18
    • /
    • 2011
  • In this study the optimal volume for non-point source control retention is estimated considering spatio-temporal variation of land surface. The 3-parameter mixed exponential probability density function is used to represent the statistical properties of rainfall events, and NRCS-CN method is applied as rainfall-runoff transformation. The catchment drainage area is divided into individual $30m{\times}30m$ cells, and runoff curve number is estimated at each cell. Using the derived probability density function theory, the stormwater probability density function at each cell is derived from the rainfall probability density function and NRCS-CN rainfall-runoff transformation. Considering the antecedent soil moisture condition at each cell and the spatial variation of CN value at the whole catchment drainage area, the ensemble stormwater capture curve is established to estimate the optimal volume for an non-point source control retention. The comparison between spatio-temporally varied land surface and constant land surface is presented as a case study for a urban drainage area.

도로교 내진설계 스펙트럼에 부합하는 표준 PSD함수의 제안 (A Proposal of Reference Power Spectral Density Functions Compatible with Highway Bridge Design Specta)

  • 최동호;이상훈;고정훈
    • 대한토목학회논문집
    • /
    • 제28권1A호
    • /
    • pp.59-67
    • /
    • 2008
  • 원전 구조물의 내진해석에서 사용하는 시간이력 함수는 적절한 하중을 보장하기 위하여 설계응답스펙트럼에 부합할 뿐만 아니라 최소 PSD함수 이상의 PSD함수를 갖도록 함으로서 각각의 진동수에서 일정 크기 이상의 에너지를 갖고 있어야 한다. 도로교 구조물에서도 구조물의 대형화와 정교화로 인한 구조물의 공공 기능의 안전성이 더욱 강조되어, 설계 목적의 PSD함수의 규정이 필요하지만 적절한 절차가 개발이 되지 않아 현실적으로 적용하기 어려운 실정이다. 본 연구에서는 다수의 인공지진을 이용하여 표준 PSD함수를 계산하는 절차를 제시하고 현재의 도로교 내진설계 스펙트럼에 부합하는 표준 PSD 함수를 제안하였다.

A novel time scale of dynamic heterogeneity in a supercooled liquid system

  • 문석진;박계현;박상원;정연준
    • EDISON SW 활용 경진대회 논문집
    • /
    • 제4회(2015년)
    • /
    • pp.138-146
    • /
    • 2015
  • 액체 상태의 물질이 매우 급속하게 냉각되면 일반적으로 과냉각액체(supercooled liquid) 상태에 도달한다. 과냉각액체는 더 낮은 온도에서 유리상(glass phase)으로 상전이를 일으킨다고 알려져 있는데, 이때 나타나는 동역학적 불균일성(dynamic heterogeneity)은 상전이를 기술하는데 중요한 역할을 한다. 그러나 일반적인 액체의 상전이를 연구할 때 주로 사용되던 상관함수(correlation function)으로는 이러한 불균일성을 정량적으로 표현하기 어렵기 때문에 동역학적 민감도(dynamic susceptibility)나 multi-time correlation function 등 동역학적 성질(dynamic property)로부터 특징적인 시간 개념 및 거리 개념을 도출하려는 연구가 많이 진행되어 왔다. 본 논문에서는 일반적으로 특징적인 거리 개념을 도출해 내는데 사용되는 4점 밀도 상관함수(four-point density correlation function)인 dynamic susceptibility(${\chi}^4$)가 입자 밀도의 요동(fluctuation)의 상관관계(correlation)가 지속되는 특징적인 시간 개념에 대한 정보 또한 포함하고 있다는 점에 주목하였다. 이에 따라 ${\chi}^4$의 시간에 대한 적분인 ${\tau}_4$를 새롭게 도입하였으며 그 결과로 ${\tau}_4$는 three-time density correlation function으로부터 도출한 ${\tau}_{Dh}$와 같은 축척(scaling)을 가지는 것을 확인하였다. 과냉각액체에 대한 장난감 모형(toy model)의 일종인 "Lennard-Jones potential 하에서 운동하는 서로 다른 두 종류의 입자들"을 연구에 사용하였다.

  • PDF

재난변동풍하중을 받는 고층건물의 평균자승응해석 (Mean Square Response Analysis of the Tall Building to Hazard Fluctuating Wind Loads)

  • 오종섭;황의진;류지협
    • 한국방재안전학회논문집
    • /
    • 제6권3호
    • /
    • pp.1-8
    • /
    • 2013
  • 시간과 공간에 따라 변화하는 난류성분의 변동풍하중을 받는 고층건물의 경량화 및 연성화 현상은 고유진동수와 감쇠비를 적게함으로서 동적으로 매우 불리한 진동문제을 발생하게 되어, 변동풍하중을 받는 도심의 고층건물에 대한 동적해석의 중요성이 인식되고 있다. 본 논문에서는 돌풍과 같이 짧은 시간동안에 통계적 성질이 변화하는 변동풍하중을 나타내기 위하여 정상불규칙 풍하중에 시간에 따라 변화하는 결정적함수(A(t) = 1-exp($-{\beta}t$))를 곱하여 나타냈고, 이러한 변동풍하중을 받는 고층건물에 대한 평균류방향의 동적변위응답해석은 진동이론으로부터 Time-dependent Response Spectral Density함수를 나타냈고, 진동함수를 포함하여 나타내는 Time-dependent Response Spectral Density의 진동수영역에 대한 적분의 해로부터 동적응답을 해석적으로 구하기 위하여 Contour적분에서 Cauchy의 적분정리와 잔유치 정리(residue theorem)에 의한 잔유치 적분으로부터 해석함수를 구했다. 해석 예에서 본 논문에서 구한 해석함수와 기존의 수치해석방법에 따른 결과를 비교 검토했고, 고층건물의 동적 특성에 따른 해석결과도 비교 검토했다.

THE BRIGHT PART OF THE LUMINOSITY FUNCTION FOR HALO STARS

  • Lee, Sang-Gak
    • 천문학회지
    • /
    • 제28권2호
    • /
    • pp.139-146
    • /
    • 1995
  • The bright part of the halo luminosity function is derived from a sample of the 233 NLTT propermotion stars, which are selected by the 220 km/ see of cutoff velocity in transverse to rid the contamination by the disk stars and corrected for the stars omitted in the sample by the selection criterion. It is limited to the absolute magnitude range of $M_v=4-8$, but is based on the largest sample of halo stars up to now. This luminosity function provides a number density of $2.3{\cdot}10^{-5}pc^{-3}$ and a mass density of $2.3{\cdot}10^{-5}M_{o}pc^{-3}$ for 4 < $M_v$ < 8 in the solar neighborhood. These are not sufficient for disk stability. The kinematics of the sample stars are < U > = - 7 km/sec, < V > = - 228 km/sec, and < W > = -8 km/sec with (${\sigma_u},{\sigma_v},{\sigma_w}$) = (192, 84, 94) km/sec. The average metallicity of them is [Fe/H] = $- 1.7{\pm}0.8$. These are typical values for halo stars which are selected by the high cutoff velocity. We reanalyze the luminosity function for a sample of 57 LHS proper-motion stars. The newly derived luminosity function is consistent with the one derived from the NLTT halo stars, but gives a somewhat smaller number density for the absolute magnitude range covered by the LF from NLTT stars. The luminosity function based on the LHS stars seems to have a dip in the magnitude range corresponding to the Wielen Dip, but it also seems to have some fluctuations due to a small number of sample stars.

  • PDF

Critical Review of Reconstruction Filters for Convolution Algorithm

  • Ra, Jong-Beom
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1979년도 하계 전자.전기연합학술발표회논문집
    • /
    • pp.155-157
    • /
    • 1979
  • The Fourier convolution algorithms are used to reconstruct a 3-D density function from the projection data sets. The convolved data are then back projected to obtain a density function. There are several choices of the weighting function for the design of the reconstruction(deblurring) filter. Present paper reviews the design of reconstruction filter considering the problems such as the effects of sampling rate, aliasing, and noise.

  • PDF

확률밀도합수의 축차모수추정방식에 관한 연구 (A Study on the Recursive Parameter Estimation Density Function Algorithm of the Probability)

  • 한영렬;박진수
    • 한국통신학회논문지
    • /
    • 제9권4호
    • /
    • pp.163-169
    • /
    • 1984
  • 本論文에서는 平均値가 確率密度函數의 퍼래미터의 函數일 때 確率1과 mean square로 수렴하는 새로운 母數推定알고리즘을 提案한다. 提案된 逐次알고리즘음 推定하려는 퍼래미터가 다수의 퍼래미터일 경우라도 적용시킬 수 있으며 컴퓨터 시뮬레이션에 의해 결과의 타당성을 입증하였다.

  • PDF