• 한국산림과학회지
• /
• 제99권6호
• /
• pp.914-921
• /
• 2010

본 연구는 충남지역에서 소나무림 분포가 가장 넓은 청양군과 보령시 국유림 내의 소나무임분을 대상으로 지상부와 지하부 바이오매스, 순생산량, 줄기밀도, 바이오매스 확장계수 등을 조사 분석하였다. 청양지역과 보령지역 소나무림의 임목 전체 건중량과 단위면적당 지상부 건중량은 각각 122.36 kg, 137.68 kg으로 나타났고, 72.23 Mg/ha, 143.27 Mg/ha으로 나타났으며, 지하부를 포함한 임목전체 건중량은 91.77 Mg/ha, 178.98 Mg/ha으로 나타났다. 또한 청양지역의 지상부 순생산량은 8.69 Mg/ha로 임목전체에서는 10.03 Mg/ha으로 나타난 반면에, 보령지역은 16.00 Mg/ha와 18.66 Mg/ha으로 나타났다. 두 지역의 바이오매스와 순생산량의 차이는 임분밀도와 지위의 차이에 의한 것으로 판단되었다. 줄기밀도(g/$cm^3$)는 각각 0.457, 0.421로 나타났고, 바이오매스 확장계수는 지상부와 지하부를 포함하여 각각 1.394~1.662, 1.324~1.639의 범위로 나타났다. 따라서 본 연구 결과로 얻어진 줄기밀도와 바이오매스 확장계수 값들은 충남지역 소나무림의 바이오매스 및 탄소흡수량을 추정하는데 기초적인 정보를 제공할 것으로 사료된다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
• /
• pp.289-293
• /
• 2008

본 연구에서는 하천에 유입된 오염물질의 거동 및 확산특성을 파악하기 위하여 실제 하천에서 RI(Radioactive Isotope) 추적자를 이용하여 오염물 확산을 실측하고 그 결과를 수치모형과 비교분석하였다. 연구대상 수로구간은 금강 상류지역의 용담댐 부근 남대천 합류지점으로부터 하류로 약 2km구간에서 실험을 하였으며, 수치모형으로는 RMA-2(Resource Modeling Associates), RMA-4를 사용하였다. RI를 이용한 현장실험은 모델링을 적용한 지역과 동일 지역에서 실험을 실시하였고, 각 구간의 간격은 1km로 정하되 현장 사정에 따라 차이를 조금 두어 RI계측기를 통한 1초간격의 농도 데이터를 계측하였다. 계측결과는 수치모형의 결과와 실제 하천에서의 확산범위 및 확산에 큰 영향을 미치는 확산계수 변화에 따른 농도 분포를 비교 분석하였다. 본 연구를 통해 확산계수가 하천의 오염전파에 미치는 영향과 실측된 농도 데이터를 통해 최초 및 최대농도 도달시간을 파악할 수 있었고, 이것으로 인하여 확산계수를 산정을 할 수 있는 기초자료를 마련하였다.

• 한국환경복원기술학회지
• /
• 제23권6호
• /
• pp.125-135
• /
• 2020

The uncontrolled urban expansion causes various social, economic problems and natural/environmental problems. Therefore, it is necessary to forecast urban expansion by identifying various factors related to urban expansion. This study aims to forecast it using a decision tree that is widely used in various areas. The study used geographic data such as the area of use, geographical data like elevation and slope, the environmental conservation value assessment map, and population density data for 2006 and 2018. It extracted the new urban expansion areas by comparing the residential, industrial, and commercial zones of the zoning in 2006 and 2018 and derived a decision tree using the 2006 data as independent variables. It is intended to forecast urban expansion in 2030 by applying the data for 2018 to the derived decision tree. The analysis result confirmed that the distance from the green area, the elevation, the grade of the environmental conservation value assessment map, and the distance from the industrial area were important factors in forecasting the urban area expansion. The AUC of 0.95051 showed excellent explanatory power in the ROC analysis performed to verify the accuracy. However, the forecast of the urban area expansion for 2018 using the decision tree was 15,459.98㎢, which was significantly different from the actual urban area of 4,144.93㎢ for 2018. Since many regions use decision tree to forecast urban expansion, they can be useful for identifying which factors affect urban expansion, although they are not suitable for forecasting the expansion of urban region in detail. Identifying such important factors for urban expansion is expected to provide information that can be used in future land, urban, and environmental planning.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.692-697
• /
• 1994

In the actual sound environmental systems, it seems to be essentially difficult to exactly evaluate a whole probability distribution form of its response fluctuation, owing to various types of natural, social and human factors. Up to now, we very often reported two kinds of unified probability density expressions in the standard expansion from of Hermite and Laguerre type orthonormal series to generally evaluate non-Gaussian, non-linear correlation and/or non-stationary properties of the fluctuation phenomenon. However, in the real sound environment, there still remain many actual problems on the necessity of improving the above two standard type probability expressions for practical use. In this paper, first, a central point is focused on how to find a new probabilistic theory of practically evaluating the variety and complexity of the actual random fluctuations, especially through introducing some equivalence transformation toward two standard probability density expressions mentioned above in the expansion from of Hermite and Laguerre type orthonormal series. Then, the effectiveness of the proposed theory has been confirmed experimentally too by applying it to the actual problems on the response probability evaluation of various sound insulation systems in an acoustic room.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.115-122
• /
• 2020

A promising method for removal of Cs ions from water and their incorporation into stable crystal structure ready for safe and permanent disposal was described. Cs-exchanged X zeolite was hot-pressed at temperature ranging from 800 to 950 ℃ to fabricate dense pollucite ceramics. It was found that the application of external pressure reduced the pollucite formation temperature. The effect of sintering temperature on density, phase composition and mechanical properties was investigated. The highest density of 92.5 %TD and the highest compressive strength of 79 MPa were measured in pollucite hot-pressed at 950 ℃ for 3 h. Heterogeneity of samples obtained at 950 ℃ was determined using scanning electron microscopy. The pollucite hot-pressed at 950 ℃ had low linear thermal expansion coefficient of ~4.67 × 10^-6 K^-1 in the temperature range from 100 to 1000 ℃.

• 산업식품공학
• /
• 제15권3호
• /
• pp.262-268
• /
• 2011

The effects of pellet moisture content on physical properties (expansion ratio, density and breaking strength) of vacuum-puffed Yukwa (non-oil puffed Yukwa) were investigated in this study. The Yukwa was made from the waxy rice steeped at 25 and $30^{\circ}C$ for 3, 5 and 10 days with pellet drying times (6, 8 and 10.5 hr). As the drying time increased from 6 to 10.5 hr at $50^{\circ}C$, the highest value of pellet moisture content (29.4%) was found in the samples made from the steeped waxy rice at $25^{\circ}C$ for 5 days after 6 hr drying, while the lowest value (16.3%) was found at $25^{\circ}C$ for 3 days after 10.5 hr drying. Both redness and yellowness values of vacuum-puffed Yukwa increased as the drying time increased. The expansion ratio of Yukwa was greatly affected by drying time, ranging from 2.07 (26.8% pellet moisture content) to 7.01 (24.0% pellet moisture content). From the data, it can be concluded that the pellet moisture content had a significant influence on the physical characteristics of vacuum-puffed Yukwa. With vacuum puffing condition of 3 min heating and 2 min puffing, the pellets with about 25% moisture content showed higher expansion ratio, and lower density and breaking strength.

• 한국세라믹학회지
• /
• 제24권3호
• /
• pp.277-281
• /
• 1987

The various contents of MgF2 from 0 to 12.5wt% are studied in the AlF3-(Mg＋Sr＋Ba)F2-P2O5 system for the effects of various properties in glasses and the atmosphere of melting was controlled by N2 and Ar gas respectively. Density, refractive index, infrared transmission, thermal conductivity and thermal expansion coefficient of glasses are determined. Density, refractive index and thermal conductivity are decreased, micro-hardness and thermal expansion coefficient are increased according to the increasing of MgF2 contents. Infrared transmittance decreases with increasing the MgF2 contents and it slightly dropped by air than N2 and Ar atmosphere. Other properties are not influenced by atmosphere control.

• 한국표면공학회지
• /
• 제35권5호
• /
• pp.289-294
• /
• 2002

ZnTe films have been grown on (100) GaAs substrate with two representative problems. The one is lattice mismatch, the other is thermal expansion coefficients mismatch of ZnTe /GaAs. It claims here, the relationship of film thickness and defects distribution with (100) ZnTe/GaAs using hot wall epitaxy (HWE) growth was investigated by transmission electron microscopy (TEM). It analyzed on the two-sort side using TEM with cross-sectional transmission electron microscopy (XTEM) and high-resolution electron microscopy (HREM). Investigation into the nature and behavior of dislocations with dependence-thickness in (100) ZnTe/ (100) GaAs hetero-structures grown by transmission electron microscopy (TEM). This defects range from interface to 0.7 $\mu\textrm{m}$ was high density, due to the large lattice mismatch and thermal expansion coefficients. The defects of low density was range 0.7$\mu\textrm{m}$~1.8$\mu\textrm{m}$. In the thicker range than 1.8$\mu\textrm{m}$ was measured hardly defects.

• 열처리공학회지
• /
• 제17권5호
• /
• pp.293-298
• /
• 2004

For the application of heat sink device, the green sheets of powder of W-XCu and Mo-XCu composites were fabricated by tape casting technique. The mixing ratio of powder and binder was 6:4. The green sheet was shrinked up to 10~20% after sintering and the maximum relative density was above 95%. Thermal conductivity and Thermal expansion systematically increased with increasing Cu contents. The maximum thermal conductivity of W-20wt.%Cu was about 206[W/mK].

• 한국세라믹학회지
• /
• 제24권2호
• /
• pp.117-122
• /
• 1987

Glass forming ranges in the AlF3-(Mg＋Sr＋Ba)F2-P2O5 system are studied and ultraviolet transmission, infrared transmission, coefficient of refractive index, thermal expansion coefficient, density and chemical durability of the glasses are determined. Glass forming range is restricted MgF2 0-10wt%, SrF2 10-50wt%, BaF2 10-40wt% in this system. While BaF2 is substituted by SrF2, density and refractive index are decreased, micro hardness and thermal expansion coefficient are increased according to the increasing of SrF2 at fixed MgF2 contents. These samples represent high transmittance(93%) from 400nm to 3800nm and chemical durability of these samples show less than 0.3mg/$\textrm{cm}^2$$.$hy by weightloss.