• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.9
• /
• pp.40-49
• /
• 2011

Integrating massive components and low-power policies have been actively investigated for system-on-chip designs. But in recent years, finding the optimal interconnection structure among heterogeneous components has emerged as a critical system design issue. Therefore, various simulation tools to model interconnection designs are being developed and performance evaluation of simulation is reflected in the real design. But most of the simulation environments employ traffic generation based on the mathematical probability functions, and such traffic generation cannot fully cover for various situations that may be occurred in the real system. Therefore, the demand for traffic pattern generation based on real applications is increasing. However, there have been few simulators that adopt application-specific traffic generators. This paper proposes a novel traffic generation method in simulating various interconnection structures for multi-processor system-on-chip design. The proposed traffic generation method can generate traffic patterns that can reflect the actual characteristics of the application and evaluate the performance of an interconnection structure under more realistic circumstance than traffic patterns using mathematical probability functions. By comparing the differences between the proposed method and the one based on mathematical probability functions, this paper shows advantages of the proposed traffic generation method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6788-6798
• /
• 2015

In recent high speed rail way, the operating speed of train is enhanced and the introduction of EMU train vehicles is increased. In addition, as expected the demand of the concrete slab track and the trend of design cross-section reduction, the clear behavior of evaluation of internal slab layer is demanded about the variation of design load and speed. The purpose of this study is to evaluate and identify the mechanical behavior pattern of concrete slab track and track-road bed with the variation of axle load and train speed. To this end, the behavior of TCL and HSB was evaluated in according to the variation of axle load and speed. And the analysis results and the data measured TCL strain sensor, which was embedded in TCL slab under installation on Honam high speed railway, was analyzed. The analysis result shows that the strain are increasing in according to the speed-up of train, and line regression was obtained from measured data. Analysis data of the state of bonding condition of slab layer and measured data was analyzed. It is conducted that the TCL layer stress of HEMU 430X, which of axle load, is lighter was similar to the stress of KTX-Honam, the standard deviation of measured stress is dramatically increased.

• Journal of Distribution Science
• /
• v.11 no.4
• /
• pp.89-97
• /
• 2013

Purpose - The purpose of this study is to systematically review the background of the Korean distribution promotion policy and distribution adjustment policies along with related regulations and policies. Research design, data, and methodology - Domestic distribution policy and relevant laws were examined through a review of existing research literature. The results of the development process of the domestic distribution policy, promotion policies, and adjustment policies are summarized below. Results - The results are summarized as follows. First, the purpose of the development of the domestic distribution promotion policy was to strengthen the competitiveness of the small and medium business industry through structural advancement of the small and medium industry. By expanding the managerial base for the small and medium industry, a new balance could be created in the national economy. There was a requirement for an early assistance policy for small and medium businesses as a base of these businesses in the distribution industry developed from their original model of catering to a traditional market of retail shops. Since 1996, there was a need for this early assistance policy due to the expansion and rapid growth of large scale stores causing a change in the consumption pattern for distribution markets and the decline of large enterprises. Second, the government supports small and medium business distribution through distribution promotion policies by supporting an organization promoting small business and supporting innovation in the distribution system. Third, in 1961 a business mediation system was established to protect small and medium industries. The Small and Medium Business Administration advises conglomerates to postpone acquisitions, restrain expansion of the business, or to reduce business scale if small businesses undergo an adverse effect such as decreasing demand because large companies are expanding into their areas. Fourth, the Distribution Adjustment Policy managed large-scale store regulation as follows: ① limitation on construction by urban planning ordinance, ② limitation on location based on traffic impact assessments, ③ regulation based on business guidelines by chiefs of autonomous bodies, ④ regulation on mandatory holidays and limitation of business hours. This large-scale store regulation is a policy introduced by authority to increase competitiveness of small and medium business distribution by the government. Conclusions - As discussed in this study, the distribution promotion policy and distribution adjustment policy are government distribution policies focused on the protection of the small and medium distribution businesses. This study is timely, since it was planned when the strengthening of the revisions of the Distribution Industry Development Act, aimed to protect small and medium retailers and merchants, was under discussion. The significance of this study is that it offers insights for the development of new policies in the future and an opportunity to consider the background of the distribution policy by the government.

• Korean Journal of Poultry Science
• /
• v.15 no.1
• /
• pp.53-60
• /
• 1988

The purpose of this presentation is to review the situation of the Cheju broiler industry peculiarized with the integrated production and marketing system to some degree, which is not prevailed in the whole broiler industry in Korea, so as to study the case of the Cheju industry from the viewpoint of an economic integration. The economic integration in the broiler industry is grouped into three patterns： non-integration, quasi-integration and complete integration, which generally exist under the different type of market competition. The quasi-integration tends to be formed at all phases where the complete integration is not fully implemented, but the non-integration has begun to change its nature into partially integrated structure. The Cheju broiler industry is characterized by the geographical location of isolated market so that factor supplies and broiler products are marketed in the different conditions from those of mainland Korea, somewhat in an oligopolistic pattern. It was since early 1980's that the industry successfully had three dressing plants merged into one by virtue of entire growers ownership, which opened an era of an integrated industry centered on the function of dressing birds. The case of Cheju broiler industry today is to be referred to as a typical quasi-integration which is coordinated the function between growing and dressing birds directly and extended the functional cooperation to distribution of products indirectly, while factor supplies are traded independently. As a result of a quasi-integration, the growers are able to receive a fixed price set by the dressing plant of growers that has the power to adjust the supply of and demand for broilers produced and consumed in the Island. There are some problems, however, in the integration of the Cheju broiler industry, stemming mainly from the process of the structure change, ： 1) the difficulty of controlling the production of broilers, 2) continuing pressure on the integration by non-integrated sectors, 3) the challenge on the stabilized broiler market from the mainland, 4) limited effectiveness of consumer education activities, and 5) lack of leadership for the industry development through integration. It is projected that the partially integrated Cheju broiler industry will be continually developed toward the direction of a complete integration in due course, as the currently independent supply sectors are to be backward integrated. The case of the Cheju broiler integration, therefore, could be used as a reference for making the whole broiler industry in Korea develop toward the integrated structure in the future.

• Journal of Fashion Business
• /
• v.6 no.2
• /
• pp.41-52
• /
• 2002

At the beginning of the modern times, orientalism and ethnic character was the main stream of current fashion. Early in the twentieth century, orientalism had a tremendous affect on various areas of society, culture, and art. Particularly, it inspired and activated the design of costume. A great variety of colors and construction of the Orient and geometrical simplicity were based on the creation of modern costume. Ethnic placed weight on the Orient because Japan strengthened competitiveness and China opened the door to foreign countries. Therefore, a large number of the oriental costume produced by a variety of fashion designers. The oriental handicraft, motif and colors of the traditional costume have been used in modern costume. In addition, they are precious ideas for designers. This thesis is about a Study on costume embroidery close to fashion through the oriental embroidery and the concept of oriental embroidery. It is also a study on patterns, skills and colors of the oriental embroidery shown in modern fashion and practical use through the designers works. First, concept, process of change, patterns, skills and colors of the oriental embroidery are mainly discussed. 1.The oriental embroidery consists of life, Buddhism, appreciation and costume embroidery. Embroidery was widely used for a variety of purposes. First, it is to make a good impression and beauty. Second, to decorate many kinds of patterns and shapes. Last, to indicate social status and stages. 2.The origin of the oriental embroidery started in Persia. was It greatly developed in Iran and was introduced in Korea via China. We are reminded of the oriental embroidery of China. China is the original place of oriental embroidery. Oriental embroidery has developed the peculiar embroidery according to each climate, custom and nationality. On the basis of these, the practical use of the oriental embroidery on modern fashion is presented through patterns, skills and colors which leads Korean designers use. Even though the oriental embroidery is not very popular among people owing to a great deal of cost and a demand for labor, the patterns and colors of the embroidery has been already familiar with the contemporaries A more profound study on the oriental embroidery will supply a great deal of material and ideas to the fashion industry. Moreover, an effort to raise self-pride in traditional culture will be also in need.

• Journal of radiological science and technology
• /
• v.27 no.4
• /
• pp.67-74
• /
• 2004

In order to assess policies for training of radiological technologists and public health, this study was conducted from the mid July to the end of August 2003 to the subjects of 890 radiological technologists who work at 44 general hospitals in 16 cities and provinces of the country. For this purpose, an analysis of variance was performed by regions divided in Capital city, metropolitan areas and small- and medium-sized cities as well as by length of service. The outcomes look as follows : 1. From the analysis of replies to questions about the government health policy for radiological technologists, high scores were given to the items: "the Law of Medical Engineers should be revised from the pattern of supervision to assignment" and "the medical institutions should be legally obliged to secure certain number of radiological technologists". 2. From the analysis of variance by regions and groups, there was difference by regions in the items: "demand and supply of radiological technologists should be controlled" and "the license number of radiological technologists should be indicated in the medical insurance bill"(p<0.000). 3. From the analysis of variance as to training of radiological technologists, a significant difference was found by length of service in the items: "it is necessary to open a 4-year department of radiology and to revise curriculum" and "the legal system to indicate license number of radiological technologists in the medical insurance bill should be introduced". 4. The analysis of variance by length of service revealed that those who have served for more than 20 years favored "it is necessary to open a 4-year department of radiology and to revise curriculum" higher than those who have served for less than 5 years, showing a tendency the longer they work, the stronger they feel necessity".

• Archives of design research
• /
• v.14 no.3
• /
• pp.87-96
• /
• 2001

If we look at Korea's urbanization since 1960, only the urban communities like buildings have developed, yet the resting places for human itself have been ignored. Many people continuously felt alienated especially after the mechanization and started to demand for better living space. For that reason, it is essential for us to develop the resting places for human among the buildings in urban areas and these resting places could form the basis of new community. We have researched on street furniture and citizen's behavior pattern in resting places through references and internet surfing to propose a design concept for a new resting place and street furniture, Therefore, we would like to design a resting place in urban area considering human, community and environment. As a result, we have designed a resting place where citizens could interact with surrounding environment and let office workers enjoy the nature among the buildings in this resting place. People could always stop by and take some rose by enjoying the surrounding nature. The resting place consists of 5 zones- public square, environmental zone, communication zone, technology zone, and entertainment zone. Each zone has its own design motif to lead systematic street furniture and site planning. The resting place is formed in a specific region which is a prototype of a resting environment in urban areas in the future and it could be reassigned according to its regional condition.

• Journal of Energy Engineering
• /
• v.26 no.4
• /
• pp.107-117
• /
• 2017

Since South Korea started to apply Renewable Portfolio Standard (RPS) in 2012, there have been huge investment for deploying renewable technologies. Recently, the government determined to incentivize battery energy storage system(BESS) with renewable generations in order to induce the improvement of dispatching capability. In this paper, the annual pattern of PV generation based on actual generation data in South Korea is analyzed and the duration curve of capacity factor is proposed in order to provide the simplified analyzing methodology of present support policy for additional BESS installation for decision maker who is responsible for supply and demand planning. With suggested methodology, the range of appropriate BESS size with respect to the variation of system marginal price(SMP) and renewable energy certificate(REC) price can be derived briefly, and decision makers easily evaluate the effect of support scheme. Current policy for BESS installation support present additional BESS-related installation policy may give incentives to developers partially, however, the dependence between BESS size and benefit components (SMP and REC) can limit the deployment of the various portfolios of the BESS. Therefore, when improving the current policy in future, addressing the dependence between the technical aspects of battery size and the benefit components separately by the technical and economical parts is needed to set the suitable compensation rules for the renewable generation and BESS.

• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.147-152
• /
• 2018

Recently, as the demand for transmission of ultra-high quality media data such as UHD, AR, and VR increases, various technologies for this have been actively developed and IEEE 802.11ad standard have been commercialized. In this paper, a test bed is constructed to analyze the indoor wireless environment using the IEEE 802.11ad standard based on mmWave, and the experimental results of various indoor wireless environments are introduced and analyzed. We compared the data from the module by data transmission, such as signal to noise ratio(SNR) and throughput. And we measured the beam pattern and width of the module and compared the effects on the indoor environment of the corridor and the office. This shows that the signal reflection of the wall shows higher SNR values and is more suitable to use for indoor than outdoor. It is confirmed that the loss when not in line of sight(LoS) is not enough to compensate the wall reflected signal. As a result, it is judged to be suitable for the indoor use of the mmWave LAN and can be usefully used for further experiments.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.25-38
• /
• 2013

Future wireless systems will be required to support the increasingly nomadic lifestyle of people. This support will be provided through the use of multiple overlaid networks which have very different characteristics. Moreover, these networks will be required to support the seamless delivery of today's popular desktop services, such as web browsing, interactive multimedia and video conferencing to the mobile devices. Thus one of the major challenges in the design of these mobile systems will be the provision of the quality of service (QoS) guarantees that the applications demand under this diverse networking infrastructure. We believe that it is necessary to use resource reservation and adaptation techniques to deliver these QoS guarantee to applications. However, reservation and pre-configuration in the entire service region is overly aggressive, and results in schemes that are extremely inefficient and unreliable. To overcome this, the mobility pattern of a user can be exploited. If the movement of a user is known, the reservation and configuration procedure can be limited to the regions of the network a user is likely to visit. Our proposed Proxy-UMP is not sensitive to increase of the search cost than other schemes and shows that the increasing rate of total cost is low as the SMR increases.