• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.708-710
• /
• 2004

This paper studies a multirate sampled-data control for LTI systems by using the digital redesign (DR) method. In this note, to well tackle the problem associated with both the state matching and the stabilization, our nobel strategy is to minimize the linear quadratic cost function. The main features of the proposed method are that i) the delta-operator-based descretization method is applied to improve the state-matching performance in the fast sampling limit and/or the large input multiplicity; ii) the proposed multirate control scheme can improve the state-matching performance in the long sampling limit; iii) some sufficient conditions that guarantee the stability of the closed-loop discrete-time system and provide a guarantee cost for the cost function can be formulated in the LMIs format; and iv) an optimal sampled-data controller in the sense of minimizing the upper bound of the cost function is also given by means of an LMI optimization procedure.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.6
• /
• pp.432-438
• /
• 2017

PURPOSE. The purpose of this study was to evaluate the in vitro validity of quantitative light-induced fluorescence-digital (QLF-D) and laser fluorescence (DIAGNOdent) for assessing proximal caries in extracted premolars, using digital radiography as reference method. MATERIALS AND METHODS. A total of 102 extracted premolars with similar lengths and shapes were used. A single operator conducted all the examinations using three different detection methods (bitewing radiography, QLF-D, and DIAGNOdent). The bitewing x-ray scale, QLF-D fluorescence loss (${\Delta}F$), and DIAGNOdent peak readings were compared and statistically analyzed. RESULTS. Each method showed an excellent reliability. The correlation coefficient between bitewing radiography and QLF-D, DIAGNOdent were -0.644 and 0.448, respectively, while the value between QLF-D and DIAGNOdent was -0.382. The kappa statistics for bitewing radiography and QLF-D had a higher diagnosis consensus than those for bitewing radiography and DIAGNOdent. The QLF-D was moderately to highly accurate (AUC = 0.753 - 0.908), while DIAGNOdent was moderately to less accurate (AUC = 0.622 - 0.784). All detection methods showed statistically significant correlation and high correlation between the bitewing radiography and QLF-D. CONCLUSION. QLF-D was found to be a valid and reliable alternative diagnostic method to digital bitewing radiography for in vitro detection of proximal caries.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.2 s.314
• /
• pp.1-9
• /
• 2007

In this paper, new results for perturbation bounds for unified decentralized systems by a unified approach using $\delta$ (defined as a shift operator at unified approach) are presented. Robust stability analysis of unified decentralized system is investigated by new robust stability bound under system uncertainties. New unified stability bounds are developed based on the unified Lyapunov matrix equation. It is shown that the system maintains its stability when new unified bounds are applied. Numerical example is presented to illustrate the proposed analysis.

• Bulletin of the Korean Mathematical Society
• /
• v.29 no.2
• /
• pp.237-243
• /
• 1992

Let (M, g, J) be a closed Kahler manifold of complex dimension m > 1. We denote by Spec(M,g) the spectrum of the real Laplace-Beltrami operator. DELTA. acting on functions on M. The following characterization problem on the spectral rigidity of the complex projective space (CP$^{m}$ , g$_{0}$ , J$_{0}$ ) with the standard complex structure J$_{0}$ and the Fubini-Study metric g$_{0}$ has been attacked by many mathematicians : if (M,g,J) and (CP$^{m}$ ,g$_{0}$ ,J$_{0}$ ) are isospectral then is it true that (M,g,J) is holomorphically isometric to (CP$^{m}$ ,g$_{0}$ ,J$_{0}$ )\ulcorner In [BGM], [LB], it is proved that if (M,J) is (CP$^{m}$ , J$_{0}$ ) then the answer to the problem is affirmative. Tanno ([Ta]) has proved that the answer is affirmative if m .leq. 6. Recently, Wu([Wu]) has showed in a more general sense that if (M, g) and (CP$^{m}$ ,g$_{0}$ ) are (-4/m)-isospectral, m .geq. 4, and if the second betti number b$_{2}$(M) is equal to b$_{2}$(CP$^{m}$ ).

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.1
• /
• pp.174-183
• /
• 2002

In this paper a control chart pattern recognition methodology based on the back propagation algorithm and Multi layer perceptron, a neural computing theory, is presented. This pattern recognition algorithm, suitable for real time statistical process control. evaluates observations routinely collected for control charting to determine whether a Pattern, such as a cycle. trend or shift, which is exists in the data. This approach is promising because of its flexible training and high speed computation with low-end workstation. The artificial neural network methodology is developed utilizing the delta learning rule, sigmoid activation function with two hidden layers. In a computer integrated manufacturing environment, the operator need not routinely monitor the control chart but, rather, can be alerted to patterns by a computer signal generated by the proposed system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.2
• /
• pp.48-55
• /
• 2022

The color image of the brand comes first and is an important visual element that leads consumers to the consumption of the product. To express more effectively what the brand wants to convey through design, the printing market is striving to print accurate colors that match the intention. In 'offset printing' mainly used in printing, colors are often printed in CMYK (Cyan, Magenta, Yellow, Key) colors. However, it is possible to print more accurate colors by making ink of the desired color instead of dotting CMYK colors. The resulting ink is called 'spot color' ink. Spot color ink is manufactured by repeating the process of mixing the existing inks. In this repetition of trial and error, the manufacturing cost of ink increases, resulting in economic loss, and environmental pollution is caused by wasted inks. In this study, a deep learning algorithm to predict printed spot colors was designed to solve this problem. The algorithm uses a single DNN (Deep Neural Network) model to predict printed spot colors based on the information of the paper and the proportions of inks to mix. More than 8,000 spot color ink data were used for learning, and all color was quantified by dividing the visible light wavelength range into 31 sections and the reflectance for each section. The proposed algorithm predicted more than 80% of spot color inks as very similar colors. The average value of the calculated difference between the actual color and the predicted color through 'Delta E' provided by CIE is 5.29. It is known that when Delta E is less than 10, it is difficult to distinguish the difference in printed color with the naked eye. The algorithm of this study has a more accurate prediction ability than previous studies, and it can be added flexibly even when new inks are added. This can be usefully used in real industrial sites, and it will reduce the attempts of the operator by checking the color of ink in a virtual environment. This will reduce the manufacturing cost of spot color inks and lead to improved working conditions for workers. In addition, it is expected to contribute to solving the environmental pollution problem by reducing unnecessarily wasted ink.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.5
• /
• pp.983-989
• /
• 2006

Current emigration and immigration control inspects passports by the naked eye, registers them by manual input, and compares them with items of database. In this paper, we propose the method to recognize information codes of passports. The proposed passport recognition method extracts character-rows of information codes by applying sobel operator, horizontal smearing, and contour tracking algorithm. The extracted letter-row regions is binarized. After a CDM mask is applied to them in order to recover the individual codes, the individual codes are extracted by applying vertical smearing. The recognizing of individual codes is performed by the RBF network whose hidden layer is applied by ART 2 algorithm and whose learning between the hidden layer and the output layer is applied by a generalized delta learning method. After a photo region is extracted from the reference of the starting point of the extracted character-rows of information codes, that region is verified by the information of luminance, edge, and hue. The verified photo region is certified by the classified features by the ART 2 algorithm. The comparing experiment with real passport images confirmed the good performance of the proposed method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.871-874
• /
• 2007

Stream data need a efficient data management with high reliability and real time processing. The characteristics of these data are a large volume, a short report interval and asynchronous report time. The typical queries of these systems consist of the current query to search the latest signal value, the snapshot query to search the signal value of a past time, the historical query to search the signal value of a past time to current. This paper proposes the efficient method to manage the above signals by using a file structured database in QNX operating systems. The query model to accommodate various query for stream data is proposed. The proposed methods are applied to reactive protection system to verify their usefulness. The COM(Cabinet Operator Module) based on the QNX employs file database that adopts a delta version and a buffering method for the resource limit of a small storage and a low computing power.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1027-1034
• /
• 2017

In this paper, we propose a new function embedding method that can measure mathematical projections of probability amplitude, probability, average expectation and matrix elements of stationary-state unit matrix at all control operation points of quantum gates. The function embedding method in this paper is to embed orthogonal normalization condition of probability amplitude for each control operating point into a binary scalar operator by using Dirac symbol and Kronecker delta symbol. Such a function embedding method is a very effective means of controlling the arithmetic power function of a unitary gate in a unitary transformation which expresses a quantum gate function as a tensor product of a single quantum. We present the results of evolutionary operation and projective measurement when we apply the proposed function embedding method to the ternary 2-qutrit cNOT gate and compare it with the existing methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.3
• /
• pp.509-516
• /
• 2008

Recently, the operator modules to control external devices are concerned about automatic management system to process continuously changed signals. These signals are the stream data of which characteristics are several numbers. a short report interval and asynchronous report time. It is necessary that the system brings about high accuracy and real time process for stream data. The typical queries of these systems consist of the current query to search the latest signal value, the snapshot query at a past time, the sliding window query from a past time to current. In this paper, we propose the efficient method to manage the above signals by using a file structured database in small-size operating systems. We also propose a query model to accommodate various queries including the sliding window query. The file database in the QNX adopts a delta version and a shared memory buffering method for the resource limit of a small storage and a low computing power.