• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.4
• /
• pp.435-441
• /
• 2014

This paper considers a single-product problem for inbound lot-sizing and outbound dispatching at a third-party warehouse, where the demand is dynamic over the discrete time horizon. Each demand must be delivered into the corresponding delivery time window which is the time interval characterized by the earliest and latest delivery dates of the demand. Ordered products are shipped by heterogeneous container types. Each container type has type-dependent carrying capacity and the unit freight cost depends on each container type. Total freight cost is proportional to the number of each container type used. Also it is assumed that related cost functions are concave and backlogging is not allowed. The objective of the paper is to simultaneously determine the optimal inbound lot-sizing and outbound dispatching plans that minimize total costs which include ordering, shipping, and inventory holding costs. The optimal solution properties are characterized for the problem and then a dynamic programming algorithm is presented to find the optimal solution.

• Clinical and Experimental Pediatrics
• /
• v.60 no.12
• /
• pp.385-389
• /
• 2017

Purpose: This study aimed to assess whether different anesthetic techniques and oxytocin use applied during delivery affect transcutaneous bilirubin levels during the first 24 hours in neonates. Methods: A total of 1,044 neonates delivered by either caesarian section (C/S) or normal vaginal delivery (NVD) were included in the study. They were classified into 5 groups as follows: group 1: born by C/S using general anesthesia, group 2: C/S using spinal anaesthesia, group 3: C/S using general anesthesia after failed spinal block, group 4: by NVD without anesthesia, and group 5: oxytocin-induced vaginal delivery without anesthesia. Transcutaneous total bilirubin levels (TBLs) were measured during the first 24 hours and on the fifth and eighth days of life and the levels in different groups were compared. Results: The TBLs were significantly higher in neonates delivered by C/S using general anesthesia rather than spinal anesthesia (P<0.001), and both groups had higher levels than those born by NVD without anesthesia ($P{\leq}0.001$). However, the group receiving general anesthesia after failed spinal block was found to have the highest bilirubin level. Moreover, TBLs were significantly higher with the use of oxytocin ($P{\leq}0.001$). Conclusions: C/S and general anesthesia adversely affect the bilirubin levels in neonates, and the use of oxytocin during vaginal delivery also increases TBLs in neonates.

• Women's Health Nursing
• /
• v.16 no.1
• /
• pp.29-36
• /
• 2010

Purpose: This study aimed to identify the scores of postpartum depression(PPD) on the first day, 1st week, and 6th week after the delivery and to explore their related factors before and after delivery in postpartum women. Methods: With a survey design, 293 postpartum women were recruited from a postpartum unit, Ilsin Christian hospital in Pusan via convenience sampling and were followed at 1st week and 6th week in the outpatient clinic. Results: Results showed that the scores of PPD(EPDS score) were low at postpartum 1st day, 1st week and 6th week but prevalence of PPD(EPDS ${\geq}13$)was 3.1%at 1st day, 8.2%at 1st week and 7.5%at 6th week, respectively. The pre-delivery factors were experience of depression, and the post-delivery factors were baby's sex(1st day), no caregiver for baby(1st week), and no help and concern for taking care of baby from husband and family(1st day and 6th week). The greater satisfaction with becoming a mother and her life, and greater maternal attachment were related to lower level of PPD at the three time points. Conclusion: Regular screening for postpartum depression and supportive and informative education is needed for postpartum women visiting the outpatient clinic for follow-up.

• Journal of KIISE:Information Networking
• /
• v.30 no.2
• /
• pp.143-154
• /
• 2003

There is a growing trend in developing system for distributed mobile system that supports services - job flow management, video conference, replicated data management and resource allocation. Supporting these services, applications have to use causally ordered message delivery. Previous proposals that provide causally ordered message delivery have problems such as communication overhead, message delaying, scalability, computing overload of mobile host. In this paper, we proposed efficient protocol for causally ordered message delivery using the methods that MSS maintains dependency information matrix between MSS and MH, Piggybacking dependency information about each immediate predecessor message. Proposed algorithm, when compared with previous proposals, provides a low message overhead, and low probability of unnecessary inhibition in delivering messages. Also, it consider resource restriction of MH and low bandwidth of wireless communication by computing most of algorithm at MSS, and reduce processing delay by executing causally ordered message delivery a unit of MH.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.3
• /
• pp.261-272
• /
• 2014

Home appliances go through a couple of packaging stages from the plant to consumers. The primary packaging, inner packaging for each part, happens for protection after products leave the plant. The secondary packaging happens in the unit of product, ensuring cushioning packaging to protect products from movement. The final tertiary packaging is for transportation and delivery. Each stage of product packaging, however, costs a lot of money because of disposable packaging materials used in each stage including vinyl, tapes, Styrofoam, and corrugated cardboards. Discarded packaging materials also cause environmental problems. In an effort to come up with a measure to solve those problems, this study proposed a plan to minimize logistics costs with semi-permanent packaging materials to replace disposable ones including Styrofoam, vinyl, and corrugated cardboards in the stages of inner packaging, cushioning packaging, product unit-based packaging, and transportation. The study also developed a model to cut down logistics costs by reducing various packaging stages including the primary, secondary, and tertiary stage only to the secondary one through module-type products instead of the transportation- and delivery-type ones, as well as demonstrated the excellence of the study through numerical analysis.

• Korean Journal of Hospice Care
• /
• v.1 no.1
• /
• pp.46-69
• /
• 2001

Hospice Care is the best way to care for terminally ill patients and their family members. However most of them can not receive the appropriate hospice service because the Korean health delivery system is mainly be focussed on acutly ill patients. This study was carried out to clarify the situation of hospice in Korea and to develop a hospice care delivery system model which is appropriate in the Korean context. The theoretical framework of this study that hospice care delivery system is composed of hospice resources with personnel, facilities, etc., government and non-government hospice organization, hospice finances, hospice management and hospice delivery, was taken from the Health Delivery System of WHO(1984). Data was obtained through data analysis of litreature, interview, questionairs, visiting and Delphi Technique, from October 1998 to April 1999 involving 56 hospices, 1 hospice research center, 3 non-government hospice organizations, 20 experts who have had hospice experience for more than 3 years(mean is 9 years and 5 months) and officials or members of 3 non-government hospice organizations. There are 61 hospices in Korea. Even though hospice personnel have tried to study and to provide qualified hospice serices, there is nor any formal hospice linkage or network in Korea. This is the result of this survey made to clarify the situation of Korean hospice. Results of the study by Delphi Technique were as follows: 1.Hospice Resources: Key hospice personnel were found to be hospice coordinator, doctor, nurse, clergy, social worker, volunteers. Necessary qualifications for all personnel was that they conditions were resulted as have good health, receive hospice education and have communication skills. Education for hospice personnel is divided into (i)basic training and (ii)special education, e.g. palliative medicine course for hospice specialist or palliative care course in master degree for hospice nurse specialist. Hospice facilities could be developed by adding a living room, a space for family members, a prayer room, a church, an interview room, a kitchen, a dining room, a bath facility, a hall for music, art or work therapy, volunteers' room, garden, etc. to hospital facilities. 2.Hospice Organization: Whilst there are three non-government hospice organizations active at present, in the near future an hospice officer in the Health&Welfare Ministry plus a government Hospice body are necessary. However a non-government council to further integrate hospice development is also strongly recommended. 3.Hospice Finances: A New insurance standards, I.e. the charge for hospice care services, public information and tax reduction for donations were found suggested as methods to rise the hospice budget. 4.Hospice Management: Two divisions of hospice management/care were considered to be necessary in future. The role of the hospice officer in the Health & Welfare Ministry would be quality control of hospice teams and facilities involved/associated with hospice insurance standards. New non-government integrating councils role supporting the development of hospice care, not insurance covered. 5.Hospice delivery: Linkage&networking between hospice facilities and first, second, third level medical institutions are needed in order to provide varied and continous hospice care. Hospice Acts need to be established within the limits of medical law with regards to standards for professional staff members, educational programs, etc. The results of this study could be utilizes towards the development to two hospice care delivery system models, A and B. Model A is based on the hospital, especially the hospice unit, because in this setting is more easily available the new medical insurance for hospice care. Therefore a hospice team is organized in the hospital and may operate in the hospice unit and in the home hospice care service. After Model A is set up and operating, Model B will be the next stage, in which medical insurance cover will be extended to home hospice care service. This model(B) is also based on the hospital, but the focus of the hospital hospice unit will be moved to home hospice care which is connected by local physicians, national public health centers, community parties as like churches or volunteer groups. Model B will contribute to the care of terminally ill patients and their family members and also assist hospital administrators in cost-effectiveness.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.2
• /
• pp.32-37
• /
• 2022

As semiconductors become finer, equipment must perform precise and accurate processes to achieve the desired wafer fabrication requirement. Radio frequency power delivery system in plasma system plays a critical role to generate the plasma, and the role of impedance matching unit is critical to terminate the reflected radio frequency power by modifying the impedance of the matching network in the plasma equipment. Impedance matching unit contains one fixed inductor and two variable vacuum capacitors whose positions are controlled two step motors. Controlling the amount of vacuum variable capacitor should be made as soon as possible when the mismatched impedance is detected. In this paper, we present the impedance matching algorithm using the phase sensor.

• Journal of Environmental Science International
• /
• v.21 no.1
• /
• pp.31-39
• /
• 2012

The objective of this study is to provide pollutant loads delivery ratio for flow duration in Oenam-cheon watershed, which is upstream watershed of Juam Lake. To calculate the delivery ratio by flow duration, rating curves and discharge-loads curves using measured data were established, then Flow Duration Curve(FDC) and pollutant loads delivery ratio curves were constructed. The results show that the delivery ratios for $BOD_5$ for abundant flow($Q_{95}$), ordinary flow($Q_{185}$), low flow($Q_{275}$), and drought flow($Q_{355}$) were 23.9, 12.7, 7.1, and 2.9%, respectively. The delivery ratios of same flow regime for T-N were 58.4, 31.2, 17.2 and 7.1%, respectively. While, the delivery ratios T-P were 17.3, 7.5, 3.4, and 1.1% respectively. In general, delivery ratio of high flow condition showed higher value due to the influence of nonpoint source pollution. Based on the study results, generalized equations were developed for delivery ratio and discharge per unit area, which could be used for ungaged watershed with similar pollution sources.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_3
• /
• pp.1207-1219
• /
• 2022

「Act On Contracts To Which The State Is A Party」 stipulates that the "Construction Standard Production Rate" and "Construction Standard Unit Price" be used as the criteria for determining the estimated price of construction works performed by public institutions. In this regard, issues such as the application scope of the Construction Standard Unit Price, and the effect of budget reduction continue. However, due to the lack of quantitative data on the actual application of Construction Standard Unit Price, it is difficult to objectively evaluate various issues. In order to prepare data for objective evaluation of the Construction Standard Unit Price, this study analyzed the ripple effect of applying the Construction Standard Unit Price based on the bill of quantity. As a result of the analysis, the Construction Standard Unit Price ripple effect in the civil engineering part was 9.2%, and it was analyzed that there was a ripple effect of about 1.9% based on the civil engineering direct cost. In the construction part, the ripple effect was analyzed to be relatively high at 17%, but it was found to have a ripple effect of about 3% in the construction direct cost. Based on the total direct cost, the ripple effect was calculated as 2.2%. Based on the analysis results, it is possible to evaluate the effect of applying the Standard Market Unit Price, and it is expected to be used as basic data to solve issues. As a future study, it is necessary to additionally analyze the ripple effect by Standard Market Unit Price application range (over 10 billion, over 20 billion won, etc.) and delivery system type (comprehensive evaluation, qualification examination, technical bidding, etc.). In addition, it is necessary to study the appropriate ripple effect of the Standard Market Unit Price.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.3
• /
• pp.319-329
• /
• 2024

This study examined domestic and international regulations concerning concrete unit weight, along with an evaluation of unit weight in concrete poured on construction sites. Fluctuations in unit weight were observed to correlate with concrete quality issues such as material separation, bleeding, and latency. A word cloud analysis, centered on the concept of concrete quality, further highlighted the significant influence of unit weight. Comparative analysis between Korea and Japan revealed few substantial differences in unit weight management and measurement techniques. However, calculation of concrete unit weight at delivery, using the unit volume mass method, indicated considerable variability among random on-site samples. Notably, the unit weight often exceeded the recommended standard. These findings emphasize the necessity for strict adherence to unit weight standards by all stakeholders involved in concrete production and construction, including ready-mix concrete (REMICON) producers, construction firms, and inspectors. To ensure consistent quality of cast concrete on-site, the establishment of a more comprehensive and practical system is recommended, incorporating measures such as on-site inspections.