• Journal of the Korea Society of Computer and Information
• /
• v.11 no.1 s.39
• /
• pp.157-165
• /
• 2006

This paper proposes a new output-buffered multicast ATM switch with tandem crosspoints switching fabric, named the MTCOS(Multicast Tandem Crosspoint Output-buffered Switch). The MTCOS consists of multiple simple crosspoint switch fabrics, named TCSF(Tandem Crosspoint Switch Fabric) , and concentrated output buffers for efficient multicasting. The TCSF resolves the cell delay deviation problem which the self-routing crossbar switches inherently have. Further, it offers multiple concurrent pathes from one input to multiple output ports. It also provides multi-channel switching by easy software configuration and has several desirable characteristics such as scalability, high Performance, and modularity. A shared traffic concentration and output queuing strategies of the MTCOS results in lower cell loss as well as lower cell delay time over a wide range of multicast traffic. Furthermore, it has lower hardware complexity than that of the SCOQ and Knockout multicast switch to achieve the same Knockout concentration rate as the conventional switches. It is shown that the proposed switch can be easily applied to design high performance for any multicast traffic by analytic analysis and computer simulation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.182-189
• /
• 2014

A tapped delay line time-to-digital converter (TDC) can be easily implemented using internal carry chains in a field-programmable gate array, and hence, its use is widespread. However, the tapped delay line TDC suffers from performance degradation because of differences in the delay times of dedicated carry chains. In this paper, a dual edge measurement method is proposed instead of a typical step signal to the delay cell to compensate for the performance degradation caused by wide-delay cells in carry chains. By applying a pulse of a fixed width as an input to the carry chains and using the time information between the up and down edges of the signal pulse, the timing accuracy can be increased. Two dedicated carry chain sites are required for the dual edge measurements. By adopting the proposed dual edge measurement method, the average delay widths of the two carry chains were improved by more than 35%, from 17.3 ps and 16.7 ps to 11.2 ps and 10.1 ps, respectively. In addition, the maximum delay times were improved from 41.4 ps and 42.1 ps to 20.1 ps and 20.8 ps, respectively.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.137-143
• /
• 2015

A delay-line type time-to-digital converter (TDC) implemented in a field-programmable gate array (FPGA) is most widely owing due to its simple structure and high conversion rate. However, the delay-line type TDC suffers from nonlinearity error caused by the long delay-line because its time interval measurement range is determined by the length of the used delay line. In this study, a new TDC structure with a shorter delay line by taking a pulse train as an input is proposed for improved time accuracy and efficient use of resources. The proposed TDC utilizes a pulse-train with four transitions and a transition state detector that identifies the used transition among four transitions and prevents the meta-stable state without a synchronizer. With 72 delay cells, the measured resolution and maximum non-linearity were 20.53 ps, and 1.46 LSB, respectively, and the time interval measurement range was 5070 ps which was enhanced by approximately 343 % compared to the conventional delay-line type TDC.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.24-30
• /
• 2008

In this paper we analyze the performance of an adaptive sector cell system, which is adopted to maintain the traffic balance between sectors and to utilize the cell resources effectively, using the data collected from real channel environments. In the data measurements, we transmitted the QPSK modulated signal with carrier frequency of 1.95GHz and received the signals using the 8x4 array antenna equipped on the top of buildings in the urban area. We analyzed the angular distribution and the delay spread of a user signal and analyzed angular distribution of mobile users in a cell using the collected data. Also, we propose the vector channel modeling using the estimated pdf(probability distribution function) of the analyzing results. Through the proposed channel modeling the improvement of the call blocking rate was analyzed when using the adaptive sector cell system, and computer simulations show that the call blocking rate of the adaptive sector cell system was much lower than that of the fixed sector cell system. Additionally, it shows that the call blocking rate increases severely in the fixed sector cell system while the difference of the call blocking rate was smaller in the adaptive sector cell system, as the user density of the spatial distribution increases.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.2
• /
• pp.40-49
• /
• 1998

In this paper, we propose an efficient per-Trunk interworking mechanism between PSTN and ATM network assuming the situation ATM network interworks with PSTN during the evolution period. The proposed mechanism improves the cell payload utilization by mapping only the active charnnels of PSTN frame into ATM cell payload. Also, we propose the frame recovery mechanism to guarantee the frame sequence integrity. The proposed mechanism is compared with other possible ones in terms of cell payload utilization, cell packetization delay. We present the implementation structure of the interworking unit. the correctness of the mechanism and the feasibility of the implementation are verifid through the CAD simulation.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.1
• /
• pp.19-26
• /
• 2002

This paper propose the queue structure of cell buffering in the output buffer of ATM switch for the traffic with the different QoS. The proposed queue structure can minimize the cell loss ratio of bursty traffic, maximize the queue utilization through the sharing of real-time queue and non-real-time queue. To evaluate the proposed queue structure, we compare the CLP and cell average delay of the proposed queue and fixed queue using the bursty traffic patterns.

• Animal cells and systems
• /
• v.2 no.1
• /
• pp.99-106
• /
• 1998

In this study, we have examined the role of cAMP in gap junctional communication (GJC) in preimplantation mouse embryos. GJC was monitored by Lucifer Yellow (LY) injected into one blastomere of compacted embryos. The speed of GJC was defined as the time taken for the last blastomere of the embryo to become visibly fluorescent. The median time for 8-cell embrvos (140 sec) was similar to that for 16-cell (135 sec). To determine whether cAMP and cAMP-dependent protein kinase (PKA) are involved in the regulation of GJC, the effects of PKA inhibitor (H8) and cAMP analogues (Rp-cAMP and 8-Br-cAMP) on dye transfer between blastomeres of compacted embryos were examined. Some of the embryos treated with either H8 or Rp-cAMP failed to transfer LY to all blastomeres within 10 min. In contrast, 8-Br-cAMP speeded up fluorescent dye transfer. The median time to fill all blastomeres with LY was 140 sec in untreated controls and 90 sec in siblings treated with 8-Br-cAMP. Inhibition of PKA by H8 or Rp-cAMP induced delay or arrest in embryo development after compaction, but the increase of intracellular cAMP showed no effect. These findings suggest that GJC in preimplantation mouse embryos is regulated by cAMP-PKA pathway and transient interference by PKA inhibitors induces the developmental delay beyond compaction.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.spc3
• /
• pp.282-288
• /
• 2012

Proton exchange membrane fuel cell (PEMFC) is the most promising energy source for the robot applications because it has unique advantages such as high energy density, no power drop during operating, and easy to make compact size. However, PEMFC has intrinsic disadvantages which are delay to start up and difficulty to correspond drastic load changes. These disadvantages can be compensated by hybrid operating with a Li-poly battery. This study is focus to build and understand the hybrid system for the robot system. In this study, we build the PEMFC hybrid system using EOS-320 PEMFC stack, Li-poly battery and G-Philos FDX1-250BU dc-dc converter. The hybrid system is accurately monitored by CAN and RS485. The system was studied under two conditions such as non-loaded and loaded operating conditions. The results show that the system has delay to start up without hybrid operating and it can be compensated with the hybrid operating.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.11
• /
• pp.41-48
• /
• 2005

The crosstalk effects that can be observed in the very dee submicron semiconductor chips are due to the coupling capacitances between interconnect lines. The accuracy of the full-chip timing analysis is determined by the accuracy of the estimated propagation delays of cells and interconnects within the chip. This paper presents a CMOS cell driver model and delay calculation algerian capturing the crosstalk effects due to the coupling capacitances. The proposed model and algorithm were implemented in a delay calculation program and used to estimate the propagation delays of the benchmark circuits extracted from a chip layout. We observed that the average discrepancy from HSPICE simulation results is within $1\%$ for the circuits with a victim affected by $0\~10$ aggressors.

• Science of Emotion and Sensibility
• /
• v.7 no.4
• /
• pp.67-75
• /
• 2004

In this paper, we analyze previous flow control algorithm for serving ABR traffic, and then propose the algorithm which calculate fair transmission rate and control efficiently ABR traffic using VS/VD switch which has an effect on PNNI environment with long delay. For getting the transmission rate, the proposed algorithm use FMMRA as ER scheme which calculate exactly the fair share. And, in large delay state, we can obtain fair cell sharing by calculating transmission rates which obtained by transmitted queue length information of VD to VS for serve and drain cell in queue Through the computer simulation, we evaluate the performance of proposed algorithm, According to the results, the proposed algorithm shows good performance.