• 한국의류산업학회지
• /
• 제22권4호
• /
• pp.523-533
• /
• 2020

Previous studies are used to examine cellulose content, degumming period, fiber quality, production yield, production cost, development limit of fiber according to physical, chemical, and microbial degumming methods. Three types of degumming methods are used to measure surface condition after degumming, necessity of additional degumming and degree of impurity removal. First, previous studies confirmed that the microbial degumming method is superior in terms of cellulose content, fiber quality, production yield, production cost, and fiber development possibility. Second, surface condition and the necessity of additional degumming were analyzed by SEM. The black skin binding material was removed in the case of the Sangnangyi and chemical degumming; however, it was insufficient and further degumming was required. Skin fiber binding material was removed in the case of microbial degumming and the surface was cleanest after degumming; in addition, most showed the form of yarn decomposition. The FT-IR spectrum determined the degree of removal of impurities and showed that it can utilize inherent physical properties as the best degumming method. The degree of removal of pectin and lignin by microbial degumming was cleanest with hemicellulose also reduced by microbial degumming.

• 한국염색가공학회지
• /
• 제18권6호
• /
• pp.25-30
• /
• 2006

Degumming is an essential process to improve the luster and smoothness of the silk filament. Silk varieties were degummed using different methods. A number of methods, from pad-steam to specific alkaline are being used for this propose. In this paper an attempt to compare the efficiencies of different degumming processes has been made. from the results, it may be observed that when silk fabrics were pad-steam, the degree of degumming, as assessed by weight loss. When the pad-steam degumming was carried out at different pHs, adjusted using alkalies, it was observed that at higher pH the weight loss is high. Pad-steam degumming as well as star degumming was found to be superior with minimum damage to the substrate. Among the alkalis used, the sodium carbonate gives the best results, since the weight loss is almost maximum with lower strength loss by over degumming. It is also efficient from the point of view of conservation of heat energy and time as against the comparable star degumming.

• 한국염색가공학회지
• /
• 제18권3호
• /
• pp.16-22
• /
• 2006

Process contract has received considerable attention in silk degumming processes because of its critical role in quality assurance. In degumming, process exhibits shrinkage of high twisted yarn and lot-varying behavior, thus increasing the difficulties of reduction by conventional means. This necessitates the application of a package that adapts to changing degumming process, and a new approach involving package degumming is proposed. The gains of this process are prevent of shrinkage by package winding, which is simplified by reduced soft-winding or re-twisting process. The approach is expected to achieve high quality results in conventional process due to its feature of demage by tension and rubbing. Therefore package degumming has many merits such as reduce of pilling and shrinkage, production expenses saving by process contract are expected of the simplified degumming process.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.349-355
• /
• 2010

To investigate the half-degumming of raw silk, the degumming was carried out with soap or sodium carbonate or sodium bicarbonate and some mixed agents at $80^{\circ}C$ for 15 and 30 minutes. With soap of 20~25%o.w.f. degumming losses were about 7~12%. Degumming losses with sodium carbonate of 2~5%o.w.f. were about 6~15%. And about 6~12% wright losses were observed in the degumming with sodium bicarbonate of 20~30%o.w.f. In the degumming with the mixed degumming agents of soap and sodium carbonate, degumming losses were 9~15% with 5%o.w.f. soap and 2~5%o.w.f. sodium carbonate. Sodium carbonate was more effective on the removal of sericin from raw silk than soap. During drying generally half degummed silk yarns stuck together to result in harsh and hard lumps by the adhesion and solidification of the residue sericin of partially degummed silk. Sodium hydrosulfite in degumming agent effectively protected the adhesion of half degummed silk yarns.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제26권1호
• /
• pp.54-60
• /
• 2013

The partial degumming of silk has recently attracted researchers' attention because of its ability to produce silk textiles with new tactile properties, intermediate between the softness of fully degummed silk and the hardness of raw silk. However, it is difficult to obtain partially degummed silk in a homogenously degummed state due to the heterogeneous character of sericin removal. It is also difficult to examine the homogeneity of degumming. In the present study, Fourier transform infrared (FTIR) spectroscopy with attenuated total reflection (ATR) geometry was used to evaluate the effect of processing conditions on the degumming of silk yarns. The crystallinity index, calculated from FTIR spectra, showed an increase with the degumming ratio. Therefore, the homogeneity of degumming could be evaluated by the variation of crystallinity index for 30 different spots in silk yarns. The homogeneity of degumming was influenced by the total degumming time, the content of surfactant, and the liquor rate. No effect was observed upon changing the number of degumming cycles at the same total degumming time.

• 식품과학과 산업
• /
• 제51권2호
• /
• pp.100-113
• /
• 2018

To obtain an edible grade oil from crude oil extracted from oil-bearing materials, it is generally necessary to carry out a refining process composed with degumming, deacidification, bleaching, and deodorization, to remove undesirable matters which affect the quality and shelf life of oils. The main purpose of degumming is to remove gum material mainly consisted with phospholipids. Phospholipases convert nonhydratable phospholipids into their hydratable forms which can be removed by centrifugation. In comparison with conventional water and acid degumming processes, enzymatic degumming can result the lower phosphatide content in oil than conventional processes. The enzymatic degumming can be conducted with the reduced amount of acid, and contributes to generate less amount of wastewater, decrease of operating cost, and increase oil recovery yield. The phospholipases used in enzymatic degumming process are phospholipase A1, A2, B, and C.

• 한국잠사곤충학회지
• /
• 제43권1호
• /
• pp.37-40
• /
• 2001

This study was carried out to investigate the optimum condition for silk sericin collection from degumming solution using some aluminium salts with various treatment conditions and examine the thermal properties of silk sericin collected from degumming solution. Silk sericin was precipitated by treatment of aluminium metal compound from degumming solution. The best optimum collecting conditions of silk sericin from degumming solution are the concentration of 2 $m\ell$/l of polyaluminium chloride (PAC), pH range of 5~7 and room temperature. The reduction of water pollution was evaluated by decreasing the chemical oxygen demand (COD) and nitrate ion (NO$_3$￣). Thermal stability of silk sericin collected from degumming solution was a little lower than that of hot water.

• Korean Chemical Engineering Research
• /
• 제49권4호
• /
• pp.480-484
• /
• 2011

본 연구에서는 원료 유지로 산가 0.68 mgKOH/g, 수분 함량 0.09%, 고형물 함량 0.13%, 인 함량 40 ppm가량의 crude canola oil을 바이오디젤의 원료유로 활용하기 위하여 인 함량을 10 ppm 이하로 낮추는 탈검 공정을 수행하였다. Crude canola oil을 바이오디젤의 원료유로 사용하기 위해 수용성 탈검과 phospholipase A2를 탈검제로 하는 효소 탈검 공정을 비교하는 실험을 수행하였으며, 분석 결과를 바탕으로 바이오디젤의 원료유로써 조건을 만족시키는 탈검 방법을 선정하고 반응 조건을 확립하였다. 수용성 탈검의 경우에는 증류수 사용량 oil 대비 2 wt%, 반응온도 $30^{\circ}C$, 교반 속도 900 rpm에서 탈검 효율이 다른 조건에 비하여 높았으며, 반응 시간은 30분이 가장 효과적인 것으로 나타났다. Phospholipase A2를 탈검제로 사용하는 효소 탈검의 경우에는 인 함량결과를 보면 모든 조건에서 비슷한 탈검 효율을 나타내었다. 그리하여 산가 분석을 실시한 결과, 효소 투입량 oil 대비 90 ppm, pH 5, 반응 온도 $50^{\circ}C$에서의 탈검 효율이 다른 조건과 비해 우수하였다. 수용성 탈검과 효소 탈검을 비교해 보면, 효소 탈검이 효율이 높았으나 바이오디젤의 원료유를 생산하는 목적의 경우, 반응시간, 공정의 경제성을 고려할 때 수용성 탈검을 선택하는 것이 유리하다고 판단되었다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제24권1호
• /
• pp.1-5
• /
• 2012

A newly developed silkworm variety, GoldenSilk makes bright yellow cocoon. In this article, the basic characteristics of GoldenSilk cocoon were examined through color analysis, degumming characteristics and UV spectrophotometer. The colorant of GoldenSilk cocoon was not distributed evenly throughout the cocoon layer but existed in the outer layer of the cocoon. The colorant has not good resistance against sunlight. The degumming loss percentage of GoldenSilk cocoon was 29.2%, which is relatively higher than that of the authorized one. UV spectrophotometer showed specific absorption band around 400 to 500 nm, which is the specific yellow colorant of the GoldenSilk cocoon extracted to the degumming solution during the degumming process.

• 한국염색가공학회지
• /
• 제14권4호
• /
• pp.249-258
• /
• 2002

Natural silk is formed by two proteins : the crystalline fibroin (inside the silk thread) and amorphous sericin (as a tube outside the thread). The degumming process is used to eliminate the external sericin prior to dyeing ; generally it makes use of soaps at about pH 10. Sericin is the protein constituent that "gums"together the fibroin filaments of cocoon silk. It constitutes about 25% of the weight of the cocoon, is soluble in hot water and "gels" on cooling. The removal of sericin from raw silk, known as degumming, is a simple but important process usually employing hot dilute soap or alkaline solution and occasionally dilute acids or enzymic methods. During degumming, alkali is taken up by the sericin and the free acid from the soap is formed ; this may be deposited on the fiber, reducing the rate of degumming and protecting it from hydrolysis. Alkali is often added to maintain or restore the pH of the baths, but it is rarely used alone, since it leaves the silk rather harsh in handle. If complete sericin removal is required as for printing, sodium carbonate may be added. If the pH of the bath exceeds 11, the fibroin is attacked. Recently, According to the development of electrolysis, we can be obtained the electrolytic reduction water(above pH 11.5) and electrolytic oxidation water (below pH 3). The aim of this work was to study a degumming process using electrolytic water and a possibility of sericin recovery. The new degumming process used electrolytic water operates at $95^\circ{C}$ for 2hr. without any reagents. The wastewater of this process are formed by a solution of sericin in water. This conditions suggest the study of a possible recovery of this protein (sericin) which has an amino acid composition suitable for many used in cosmetics, textile finishing agents, animal feeding, etc. The degumming process using electrolytic water is available to reduce treatment costs and pollute and at the same time to recover sericin.