• Korean journal of applied entomology
• /
• v.24 no.4 s.65
• /
• pp.209-218
• /
• 1986

This study was performed to evaluate the differences in resistance of rice varieties to biotypes of the brown planthopper (BPH), capable of surving on the Milyang 30 and Milyang 63 varieties which have Bph 1 and bph 2 gene for resistance, respectively. The rice varieties tested were Milyang 30, Cheongcheong, Milyang 63 and Gaya which have been reported as having resistant genes for the BPH. The check varieties were Chucheong and Sangpoong which have no resistant gene. The degree of resistance to the BPH biotypes indicated that Milyang 30, Cheongcheong, Milyang 63 and Gaya varieties were highly resistant to the biotype 1. But their reactions against biotype 2 and 3 were variable, namely Milyang 30 and Cheongcheong were susceptible to biotype 2, and Milyang 63 was susceptible to biotype 3. In the esterase isozyme patterns of brown rice the bands of ${\beta}-1,\;{\beta}-3\;and\;{\beta}-5$ were detected in Chucheong and Sangpoong, while the bands of ${\alpha}-1,\;{\beta}-2\;and\;{\beta}-5$ were detected in the test varieties which have genes for resistance. However, the bands of ${\beta}-5$ in Milyang 63 and Gaya were stronger than those of Milyang 30 and Cheongcheong varieties. In the root of 10-days seedling, the esterase bands of ${\alpha}-2,\;{\beta}-2\;{\beta}-4\;and\;{\beta}-5$ were detected in Chucheong and Sangpoong, while the bands of ${\alpha}-1,\;{\beta}-1\;{\beta}-3\;and\;{\beta}-5$ were detected in the tested different varieties. But the bands of ${\alpha}-1\;and\;{\beta}-5$ in Milyang 63 and Gaya were stronger than those of Milyang 30 and Cheongcheong varieties.

• Korean journal of applied entomology
• /
• v.47 no.2
• /
• pp.163-168
• /
• 2008

Temperature dependent development of Tetranychus. urticae Koch was studied on the leaf of eggplant at 17, 22, 27, 32 and $37^{\circ}C$. T. urticae showed a minimum mortality at $27^{\circ}C$ and it increased at higher or lower temperatures than $27^{\circ}C$. The hatchability was low at 17 and $37^{\circ}C$. The duration of development decreased with increasing temperatures i.e., 5.3d at $37^{\circ}C$ and 25.8d at $17^{\circ}C$. Linear regression analysis of temperature vs. rate of development yielded the higher $r^2{\geq}0.88$ resulting in a good fit of the estimated line in the range of $17{\sim}37^{\circ}C$. Developmental zero temperature was $12.5^{\circ}C$ for the entire immature stage of female and $12.8^{\circ}C$ for that of male. Thermal constants were 80.5 and 74.7 degree days for those of female and male, respectively. Adult life span and oviposition period decreased with increasing temperatures. The number of eggs laid per female peaked at 141.0 eggs at $27^{\circ}C$, while that was a minimum 78.0 eggs at $37^{\circ}C$. Rate of hatchability, ratio of female, and $R_o$ were increased up to $27^{\circ}C$, and than declined thereafter. Intrinsic rate of natural increase (Rm) increased with rising temperatures and showed a maximum 0.5652 at $37^{\circ}C$. Also, ${\lambda}$ increased with increasing temperature. Doubling time (Dt) and generation time (T) decreased with increasing temperature.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Food Science and Preservation
• /
• v.14 no.6
• /
• pp.571-577
• /
• 2007

Storage characteristics of fresh and thawed sliced raw fish (flounder and rockfish) washed in different solutions (tap water, A; jade water, B; 0.2% chitosan-ascorbate (CA), C; 0.03 ppm ozone water, D; 1.5% vinegar containing jade water, E; 1.5% vinegar and 0.2% CA containing jade water, F) at $10^{\circ}C$ were investigated. Changes in pH and acidity of thawed sliced raw fish (TS) during storage were lower than for fresh sliced raw fish (DS). The total microbial content (log cfu/g) of A stored for 3 days in DS was 6.7 (which represented an increase of 1 log cycle compared with day zero), but was 5.50 in B, 3.23 in C, 4.90 in D, 2.40 in E and 1.77 in F, the latter similar to counts at day zero. The degree of microbial contamination of DS and TS followed the order F > E > D > C > B > A in flounder, and F > E > C > D > B > A in rockfish. In general the hardness and chewiness of TS was less than for DS. While the effect of CA on TS texture was not significant in flounder, the effect showed in rockfish. For DS, the appearance in B, C and D was relatively good, as was freshness. Fishiness of flavor was in the order A > B > F > E > D > C. Overall acceptability of flounder and rockfish treated with C was better than treatment with the other washing agents. For TS the appearance of flounder and rockfish were good in B and C. The freshness of flounder and rockfish were in the order of D > C > B > A > E > F and D > C > B > A > E > F, respectively. Fishiness of the flavor of sliced raw fish was lowest in D, which also provided the best overall acceptability.

• Korean Journal of Plant Resources
• /
• v.30 no.4
• /
• pp.475-480
• /
• 2017

A new Gomchwi cultivar 'Damogy ' was bred by crossing between Gomchwi (Ligularia fischeri (Ledeb.) Turcz.) and Handaeri-gomchwi (Ligularia fischeri var. spiciformis Nakai). The selection and investigation of growth and yield characteristics were conducted from 2006 to 2011 in field and greenhouse of Highland Agriculture Research Institute, NICS, Rural Development Administration, Korea. On a newly developed cultivar 'Damogy', Color of petiole ear was purple, petiole trichome was exist, light of leaf back was not exist, and density of leaf vein was degree 4. Plant height, leaf length, leaf width and petiole length were 45.9, 16.9, 21.1 and 29.0 cm, respectively in the $3^{rd}$ year in growth characteristics. Plant size was also higher than that of Gondalbi. Bolting and flowering time were Aug. $23^{th}$ and Sept. $10^{th}$, respectively. In contrast, Gondalbi showed quite earlier bolting time more than 38 days compared with 'Damogy' and consequently earlier flowering time more than 26 day. 'Damogy' showed similar leaf number (129) per plant compared to 'Gondalbi' (130). Furthermore, yield was higher 'Damogy' (1,889 g/plant) than in 'Gondalbi' (798 g/plant). 'Damogy' showed higher leaf thickness (0.71 mm) than 'Gonalbi' (0.46 mm), and consequently showed more hardness in leaf characteristics ($28.3kg/cm^2$) compared with 'Gondalbi' ($23.0kg/cm^2$). 'Damogy' showed higher resistance in the susceptibility of powdery mildew disease compared to 'Gondalbi'. 'Damogy' variety was registered plant variety protection right as a No. 89 on December 2015.

• The korean journal of orthodontics
• /
• v.30 no.4 s.81
• /
• pp.413-421
• /
• 2000

The purpose of this study was to observe the effects of pregnancy on the experimental tooth movement and alveolar bone turnover process of Sprague-Dawley female rat. Sixty rats were divided into pregnant-tooth movement group(P-Tm), normal-tooth movement group(N-Tm) and normal group(N). Maxillary first molar appliances were inserted bilaterally and activated to 40grams. To measure the amount of tooth movement, x-ray was taken 2 times after appliance insertion and before sacrifice. Animals were sacrificed at 1,3,7,14 days(N=5). Just after sacrifice, alveolar bones were collected and frozen immediately for biochemical analysis. Tooth movement was assessed cephalometrically and tartrate-resistant acid(TRAP) and alkaline phosphatase (ALP) activities were measured in extracts of paradental alveolar bone. The results were as follows: 1. The amount of tooth movement in P-Tm group was greater than that of N-Tm group(p<0.01). 2. Alveolar bone ALP of normal tooth movement group was not significantly different from the control, TRAP was significantly different from the control(p<0.01). In normal tooth movement group, alveolar bone ALP was increased gradually and peak(day 7) fell off significantly at day 14(p<0.05). The Peak of alveolar bone TRAP(day 7) fell off slightly, sustained day 14(p<0.01). 3. Alveolar bone ALP and TRAP of pregnant tooth movement group were not significantly different from that of normal tooth movement group. In pregnant tooth movement group, alveolar bone ALP was increased at day 3(p<0.01) and fell off significantly at day 7-14, alveolar bone TRAP were increased at day 3 and sustained day 14. 4. The peak of alveolar bone phosphatases in pregnant tooth movement group(day3) preceded the peak in normal tooth movement group(day7) (p<0.01). According to the above results, we suggested that bone resorption activity was increased in alveolar bone of pregnant rat, and the degree of tooth movement in pregnancy may be greater than that of normal group because of high bone turnover of alveolar bone in pregnant rat.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.636-644
• /
• 2004

Recently, self-etching adhesive system have been developed and bonding procedures simplified into one or two steps, which are simultaneously applied to both enamel and dentin. These systems are easy to use and have the potential for good clinical success. The purpose of this study is to evaluate in vitro the microleakage on the cementum/dentin and enamel walls in composite resin restoration of Class V cavities, regarding the use of different adhesive systems. 30 human premolars were divided into 3 groups. A standardized Class V preparation was prepared on the buccal and lingual surface of each premolar. The preparation were made parallel to the cementoenamel junctions, with the gingival half of the preparation extending 1mm apical to the cementoenamel junction. After adhesive system was applied to teeth as manufacture's recommendation, hybrid resin composite was filled in bulk into the preparation and light polymerized according to manufacturer's recommendations. Specimen were stored in distilled water at $37^{\circ}C$ for 5 days and thermocycled 1000 times ($5^{\circ}C{\pm}2^{\circ}C\;and\;55^{\circ}C{\pm}2^{\circ}C)$, then immersed in a 2% methylene blue solution for 12 hours. After sectioning mesio distally through the restorations, the degree of dye penetration was scored under a stereomicroscope at ${\times}\;25$ magnification. The data were analyzed statistically using t-test and one-way ANOVA. The results were as follows: ${\cdot}$ There is no adhesive system which can prevent microleakage perfectly. ${\cdot}$ There is significant difference in microleakage between enamel margin and dentin margin (p<0.0001). ${\cdot}$ In enamel margin, self-etching primer systems did not show any significant difference comparing total-etching system. In denin margin, self-etching primer systems did not show any significant difference comparing one-bottle adhesive system used in combination with total-etching.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.729-738
• /
• 1997

To estimate the change in rice productivity around lake Juam due to construction of artificial lake, growth, yield components and yield of rice were measured at different locations around lake Juam for three years from 1994 to 1996. Automated weather stations(AWS) were installed nearby the experimental paddy fields, and daily maximum, average and minimum temperature, solar radiation, relative humidity, and precipitation were measured for the whole growing period of rice. Plant height, number of tillers, leaf area and shoot dry weight per hill were observed from 8 to 10 times in the interval of 7 days after transplanting. Yield and yield components of rice were observed at the harvest time. Simulation model of rice productivity used in the study was SIMRIW developed by Horie. The observed data of rice at 5 locations in 1994, 3 locations in 1995 and 4 locations in 1996 were inputted in the model to estimate the unknown parameters. Comparisons between observed and predicted values of shoot dry weights, leaf area indices, and rough rice yield were fairly well, so that SIMRIW appeared to predict relatively well the variations in productivity due to variations of climatic factors in the habitat. Climatic elements prior to as well as posterior to dam construction were generated at six locatons around lake Juam for thirty years by the method of Pickering et al. Climatic elements simulated in the study were daily maximum and minimum temperature, and amount of daily solar radiation. The change in rice productivity around lake Juam due to dam construction were estimated by inputting the generated climatic elements into SIMRIW. Average daily maximum temperature after dam construction appeared to be more or less lower than that before dam construction, while average daily minimum temperature became higher after dam construction. Average amount of daily solar radiation became lower with 0.9 MJ $d^{-1}$ after dam construction. As a result of simulation, the average productivity of habitats around lake Juam decreased about 5.6% by the construction of dam.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.2
• /
• pp.113-118
• /
• 2016

This experiment was conducted to identify the variations in inorganic nutrients and plant growth in millet (Panicum miliaceum L.) due to soil salinity. The soil series was Munpo and soil texture was silt loam. The experimental soil was amended so that the soil had salinities of $0.8dS\;m^{-1}$, $1.6dS\;m^{-1}$, $3.2dS\;m^{-1}$ and $4.8dS\;m^{-1}$. Millet was transplanted 15 days after sowing. As soil salinity increased, the degree of reduced growth was in the order of seed production > root dry matter > plant dry matter > culm length > tiller number > stem thickness > Panicle length. Seed production was decreased to 18.9% in soil salinity of $1.6dS\;m^{-1}$, 36.9% in of $3.2dS\;m^{-1}$, and 50.7% in EC of $4.8dS\;m^{-1}$. Root dry matter decreased to 35.8% in EC of $3.2dS\;m^{-1}$, and to 40.5% in EC of $4.8dS\;m^{-1}$. As soil salinity increased, Total nitrogen content increased in all aboveground parts, roots and seeds. However, There was no difference in CaO, $P_2O_5$, $K_2O$ and, MgO in soils of different salinity. On the other hand, $Na_2O$ content was higher in the order roots> shoots> seed, and in the case of roots, $Na_2O$ content increased to 1.02% in soil salinity of $4.8dS\;m^{-1}$. However, up to soil salinity of $1.6dS\;m^{-1}$, the $Na_2O$ content of the seed was similar to that in plant grown in the Control conditions($0.8dS\;m^{-1}$). In conclusion, taking into consideration economic factors, millet could be cultivated in soil with salinities of up to approximately $1.6dS\;m^{-1}$, and seed produced from reclaimedland would be suitable for human consumption.

• Journal of Chest Surgery
• /
• v.32 no.3
• /
• pp.237-248
• /
• 1999

Background: The late results of repair of tetralogy of Fallot(TOF) are favorable in most patients. Some portion of the patients with tetralogy, however, require reoperation for residual lesions or result in late death. The outcome of patients after tetralogy repair performed during the past 13 years was studied, with an emphasis on postrepair survival and problems including reoperations. Material and Method: A retrospective review of clinical, echocardiographic and catheterization data was performed in 569 of 775 patients with TOF who underwent corrective repair between 1983 and 1995 at Sejong General Hospital, Buchon, Korea. Result: Of 28(4.9%) early deaths(defined as 30 days postrepair), 12 deaths(42.9%) were <1 year of age, with an operative mortality of 15.4%. The surviving 541 patients(age 2.8 months to 43.4 years, median 23 months) have been followed up from 1 month to 12.6 years(median 35 months) postoperatively. Most patients were in good functional class and had normal right ventricular(RV) function. Postrepair results were compared between the transatrial-transpulmonary approach and the conventional right ventriculotomy. The former technique provided a lesser incidence of significant pulmonary regurgitation(P<0.001) and alesser degree of RV dysfunction(P<0.05) compared with those in the latter. There were 10(1.8%) late deaths during the follow-up period and 6 of the deaths were directly related to reoperation or ventricular dysfunction. The 10-year actuarial survival rate was 96.7%. There were 44 reoperations(8.1%) in 39 patients(7.2%), with an operative mortality of 10.3%. The main indications or reoperation included residual ventricular septal defect(VSD) (n=6), pulmonary stenosis(PS) (n=11), VSD with PS(n=17), pulmonary regurgitation(n=7), and tricuspid regurgitation(n=2). The 5- and 10-year freedom from reoperation were 89.4% and 76.1%, respectively. Conclusion: Although the majority of patients with repaired TOF are clinically well, with a high rate of survival, approximately 7% of patients have residual lesions that require surgical therapy. Therefore, the timely and meticulous corrective repair is mandatory to avoid reoperation, and continued close surveillance is also needed for the early detection of residual problems.