• Structural Engineering and Mechanics
• /
• 제71권1호
• /
• pp.37-43
• /
• 2019

This paper studies application of modified couple stress theory and first order shear deformation theory to magneto-electro-mechanical vibration analysis of three-layered size-dependent curved beam. The curved beam is resting on Pasternak's foundation and is subjected to mechanical, magnetic and electrical loads. Size dependency is accounted by employing a small scale parameter based on modified couple stress theory. The magneto-electro-mechanical preloads are accounted in governing equations to obtain natural frequencies in terms of initial magneto-electro-mechanical loads. The analytical approach is applied to investigate the effect of some important parameters such as opening angle, initial electric and magnetic potentials, small scale parameter, and some geometric dimensionless parameters and direct and shear parameters of elastic foundation on the magneto-electro-elastic vibration responses.

• 한국지반공학회논문집
• /
• 제31권11호
• /
• pp.15-23
• /
• 2015

반복단순전단시험기를 사용하여 조밀한 해양실트질 모래의 비배수 파괴거동에 대한 평균전단응력과 반복전단응력의 영향을 평가하였다. 시험결과는 평균전단응력비가 0인 경우는 비교적 좌우 대칭형태의 반복전단변형률이 주된 변형모드였으며 영구전단변형률은 상대적으로 작게 발생하였다. 평균전단응력비가 0이상인 경우는 반복횟수가 증가함에 따라 주로 한 방향으로 영구전단변형률이 증가하고 반복전단변형률은 거의 변화가 없었다. 평균전단응력비는 응력-변형률 거동에 상당한 영향을 보였으나, 파괴에 필요한 반복하중횟수 등에 대한 영향이 반복전단응력비에 비해 상대적으로 적었다. 본 논문에서 제안한 응력기반 파괴기준은 해양구조물 설계 시 기초 하부 지반의 반복전단강도를 평가하는 데 효과적으로 사용될 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.473-476
• /
• 2005

Mobility of tracked vehicles is dependent on performance of its power equipment and suspension systems. Especially, its road wheels, components of its suspension systems, play an important role in distributing the vehicle weight on the ground and preventing from misguiding tracks. In this study, the maximum force acted on multipurpose tracked vehicles driven on the worst condition was calculated. And then FE analyses were carried out to evaluate the strength of the road wheels under the maximum force condition. For quality evaluation of the road wheels, FE simulations and experimental works were carried out under specific slant loads. Residual deformation for the slant loads was investigated and commented upon.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.62-70
• /
• 2005

The nanoindenter and AFM have been used for nanofabrication, such as nanolithography, nanowriting, and nanopatterning, as well as measurement of mechanical properties and surface topology. Nanoscale indents can be used as cells for molecular electronics and drug delivery, slots for integration into nanodevices, and defects for tailoring the structure and properties. Therefore, it is very important to make indents of desired morphology (shape, size and depth). Indents of different shapes can be obtained by using indenters of different geometries such as a cube comer and conical and spherical tips. The depth and size of indents can be controlled by making indentations at different indentation loads. However, in case of viscoplastic viscoelastic materials such as polymethylmethacrylate (PMMA) the time dependent deformation (TDD) should also be considered. In this study, the effect of process parameters such as loading rate and hold-time at peak load on the indent morphology (maximum penetration depth, elastic recovery, transient creep recovery, residual depth pile-up height) of PMMA were studied for hyperfine pattern fabrication.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.273-276
• /
• 2008

Thermoplastic resin takes place stress relaxation and creep according to temperature and time. In room temperature, time dependent deformation (TDD) of polymer was carried out at previous study. In this study, it evaluates time dependent deformation to relate temperature. Nanoscale indents can be used as cells for molecular electronics and drug delivery, slots for integration into nanodevices, and defects for tailoring the structure and properties. Therefore, it is important to control pattern depth for change of indent depth by creep when using Nanoindenter. For evaluating TDD at high temperature, it is occurred thermal-nanoindentation test by changing hold time at maximum load. Temperature is putted at $90^{\circ}C$, hold time at maximum loads are putted at 1, 10, 50, 100, 200, 300 and 500s.

• Computers and Concrete
• /
• 제25권6호
• /
• pp.575-585
• /
• 2020

Based on a refined shear deformation finite strip, transient vibrations of graphene oxide powder (GOP) reinforced plates due to external pulse loads have been investigated. The plate has uniformly and linearly distributed GOPs inside material structure. Applied pulse loads have been selected as sinusoidal, linear and blast types. Such pulse loads result in transient vibrations of the GOP-reinforced plates which are not explored before. Finite strip method (FSM) has been performed for solving the equations of motion and then inverse Laplace transform technique has been employed to derive transient responses due to pulse loading. It is reported in this study that the transient responses of GOP-reinforced plates are dependent on GOP dispersions, GOP volume fraction, type of pulse loading, loading time and load locations.

• 한국지반신소재학회논문집
• /
• 제9권3호
• /
• pp.57-65
• /
• 2010

본 연구의 주된 목적은 반복적인 하중조건하에서 연성포장체의노반재료로써, EPS블럭의 시간의존적 변형을 연구하는데 있다. 반복하중 조건에서의 EPS블럭의 거동을 이해하기 위해서 본 연구에서는 실험적 방법 및 수치모형을 제시하였다. 이 수치모델링을 위해서 반복하중 조건하에서 관찰된 변형거동과 단위중량, 변형 그리고 적용된 하중과의 상관관계의 조사가 행해졌다. 실험결과는 핀들레이 이론과 반복하중 조건에서의 연구결과의 모델 분석등과 비교되었고, 보완된 핀들레이 모델과 본 연구에서 제시한 모델은 반복하중에서의 EPS블럭의 변형거동을 나타내는데 이용될 수 있는 것으로 기대된다.

• Advances in nano research
• /
• 제12권4호
• /
• pp.427-440
• /
• 2022

In the present study, the nonlocal strain gradient theory is used to predict the size-dependent buckling and post-buckling behavior of geometrically imperfect nano-scale piezo-flexomagnetic plate strips in two modes of direct and converse flexomagnetic effects. The first-order shear deformation plate theory is used to analyze analytically nano-strips with simply supported boundary conditions. The nonlinear governing equations of equilibrium and associated boundary conditions are derived using the principle of minimum total potential energy with consideration of the von Kármán-type of geometric nonlinearity. A closed-form solution of governing differential equation is obtained, which is easily usable for engineers and designers. To validate the presented formulations, whenever possible, a comparison with the results found in the open literature is reported for buckling loads. A parametric study is presented to examine the effect of scaling parameters, plate slenderness ratio, temperature, the mid-plane initial rise, flexomagnetic coefficient, different temperature distributions, and magnetic potential, in case of the converse flexomagnetic effect, on buckling and post-buckling loads in detail.

• 한국지반공학회논문집
• /
• 제23권6호
• /
• pp.5-21
• /
• 2007

보강토 옹벽은 기존 콘크리트 옹벽에 비하여 많은 장점을 지니고 있으나 장기적으로 지속하중 혹은 반복하중 등에 의한 잔류변형의 우려로 영구 구조물로서의 적극적인 적용에 장애가 되고 있다. 이 문제를 해결하기 위해서는 보강토 구조물의 시간 의존적 잔류변형 메카니즘의 규명과 아울러 잔류변형을 예측하고 제어하는 기술이 확보되어야 한다. 본 연구에서는 이러한 연구의 필요성에 근거하여 보강토 옹벽에 발생할 수 있는 장기변형 특성 고찰에 주안점을 두고 지오그리드와 표준사로 뒤채움된 모형 보강토 옹벽에 대한 지속하중 혹은 반복하중 등 다양한 하중이력에 대한 보강토 구조물의 장기변형 특성 메카니즘을 축소모형실험을 통해 고찰하였다. 그 결과 보강토 옹벽의 시간의존적 변형은 작용하는 하중특성 뿐만 아니라 뒤채움흙 및 보강재의 역학적 특성에도 많은 영향을 받는 것으로 나타났으며, 선행하중을 작용함으로써 시간 의존적 잔류변형을 제어할 수 있는 것으로 파악되었다.

• Steel and Composite Structures
• /
• 제26권5호
• /
• pp.533-547
• /
• 2018

In this paper the time-dependent creep analysis of a thick-walled FG cylinder with finite length subjected to axisymmetric mechanical and thermal loads are presented. First order shear deformation theory (FSDT) is used for description of displacement components. Inner and outer temperatures and outer pressure are considered as thermo-mechanical loadings. Both thermal and mechanical loadings are assumed variable along the axial direction using the sinusoidal distribution. To find temperature distribution, two dimensional heat transfer equation is solved using the required boundary conditions. The energy method and Euler equations are employed to reach final governing equations of the cylinder. After determination of elastic stresses and strains, the creep analysis can be performed based on the Yang method. The results of this research indicate that the boundaries have important effects on the responses of the cylinder. The effect of important parameters of this analysis such as variable loading, non-homogeneous index of functionally graded materials and time of creep is studied on the behaviors of the cylinder.