1 |
Arefi, M. and Rahimi, G.H. (2011), "Non linear analysis of a functionally graded square plate with two smart layers as sensor and actuator under normal pressure", Smart. Struct. Syst., Int. J., 8(5), 433-447.
DOI
|
2 |
Arefi, M. and Rahimi, G.H. (2012a), "The effect of nonhomogeneity and end supports on the thermo elastic behavior of a clamped-clamped FG cylinder under mechanical and thermal loads", Int. J. Press. Ves. Pip., 96, 30-37.
|
3 |
Arefi, M. and Rahimi, G.H. (2012b), "Comprehensive thermoelastic analysis of a functionally graded cylinder with different boundary conditions under internal pressure using first order shear deformation theory", Mechanika., 18(1), 5-13.
|
4 |
Arefi, M. and Rahimi, G.H. (2012c), "Studying the nonlinear behavior of the functionally graded annular plates with piezoelectric layers as a sensor and actuator under normal pressure", Smart. Struct. Syst., Int. J., 9(2), 127-143.
DOI
|
5 |
Arefi, M. and Rahimi, G.H. (2014), "Application of shear deformation theory for two dimensional electro-elastic analysis of a FGP cylinder", Smart. Struct. Syst., Int. J., 14(2), 225-246.
DOI
|
6 |
Arefi, M. and Zenkour, A.M. (2016), "Employing sinusoidal shear deformation plate theory for transient analysis of three layers sandwich nanoplate integrated with piezo-magnetic face-sheets", Smart Mater. Struct., 25(11), 115040.
DOI
|
7 |
Arefi, M. and Zenkour, A.M. (2017a), "Nonlocal electrothermo-mechanical analysis of a sandwich nanoplate containing a Kelvin-Voigt viscoelastic nanoplate and two piezoelectric layers", Acta. Mech., 228(2), 475-493.
DOI
|
8 |
Arefi, M. and Zenkour, A.M. (2017b), "Thermo-electromechanical bending behavior of sandwich nanoplate integrated with piezoelectric face-sheets based on trigonometric plate theory", Compos. Struct., 162, 108-122.
DOI
|
9 |
Arefi, M., Rahimi, G.H. and Khoshgoftar, M.J. (2011), "Optimized design of a cylinder under mechanical, magnetic and thermal loads as a sensor or actuator using a functionally graded piezomagnetic material", Int. J. Phys. Sci., 6(27), 6315-6322.
|
10 |
Arefi, M., Rahimi, G.H. and Khoshgoftar, M.J. (2012), "Exact solution of a thick walled functionally graded piezoelectric cylinder under mechanical, thermal and electrical loads in the magnetic field", Smart Struct. Syst., Int. J., 9(5), 427-439.
DOI
|
11 |
Arefi, M., Abbasi A.R. and Vaziri Sereshk, M.R. (2016a), "Two-dimensional thermoelastic analysis of FG cylindrical shell resting on the Pasternak foundation subjected to mechanical and thermal loads based on FSDT formulation", J. Therm. Stresses., 39(5), 554-570.
DOI
|
12 |
Arefi, M., Faegh, R.K. and Loghman, A. (2016b), "The effect of axially variable thermal and mechanical loads on the 2D thermoelastic response of FG cylindrical shell", J. Therm. Stress., 39(12), 1539-1559.
DOI
|
13 |
Arefi, M., Karroubi, R. and Irani-Rahaghi M. (2016c), "Free vibration analysis of functionally graded laminated sandwich cylindrical shells integrated with piezoelectric layer", Appl. Math. Mech. (Engl Ed.), 37(7), 821-834.
DOI
|
14 |
Beldjelili, Y., Tounsi, A. and Hassan, S. (2016), "Hygrothermo-mechanical bending of S-FGM plates resting on variable elastic foundations using a four-variable trigonometric plate theory", Smart Struct. Syst., Int. J., 18(4), 755-786.
DOI
|
15 |
Bellifa, H., Benrahou, K.H., Hadji, L., Houari, M.S.A. and Tounsi, A. (2016), "Bending and free vibration analysis of functionally graded plates using a simple shear deformation theory and the concept the neutral surface position", J. Braz. Soc. Mech. Sci. Eng., 38(1), 265-275.
DOI
|
16 |
Bousahla, A.A., Benyoucef, S., Tounsi, A. and Mahmoud, S.R. (2016), "On thermal stability of plates with functionally graded coefficient of thermal expansion", Struct. Eng. Mech., Int. J., 60(2), 313-335.
DOI
|
17 |
Bouderba, B., Tounsi, A. and Houari, M.S.A. (2013), "Thermomechanical bending response of FGM thick plates resting on Winkler-Pasternak elastic foundations", Steel Compos. Struct., Int. J., 14(1), 85-104.
DOI
|
18 |
Bouderba, B., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2016), "Thermal stability of functionally graded sandwich plates using a simple shear deformation theory", Struct. Eng. Mech., Int. J., 58(3), 397-422.
DOI
|
19 |
Bounouara, F., Benrahou, K.H., Belkorissat, I. and Tounsi, A. (2016), "A nonlocal zeroth-order shear deformation theory for free vibration of functionally graded nanoscale plates resting on elastic foundation", Steel Compos. Struct., Int. J., 20(2), 227-249.
DOI
|
20 |
Bourada, M., Kaci, A., Houari, M.S.A. and Tounsi, A. (2015), "A new simple shear and normal deformations theory for functionally graded beams", Steel Compos. Struct., Int. J., 18(2), 409-423.
DOI
|
21 |
Brnic, J., Canadija, M., Turkalj, G., Krscanski, S., Lanc, D., Brcic, M. and Gao, Z. (2016), "Short-time creep, fatigue and mechanical properties of 42CrMo4-Low alloy structural steel", Steel Compos. Struct., Int. J., 22(4), 875-888.
DOI
|
22 |
Dai, H.L. and Fu, Y.M. (2007), "Magnetothermoelastic interactions in hollow structures of functionally graded material subjected to mechanical load", Int. J. Press. Ves. Pip., 84(3), 132-138.
DOI
|
23 |
Kelesm, I. and Conker, C. (2011), "Transient hyperbolic heat conduction in thick-walled FGM cylinders and spheres with exponentially-varying properties", Eur. J. Mech. A/Solids, 30(3), 449-455.
DOI
|
24 |
Draiche, K., Tounsi, A. and Hassan, S. (2016), "A refined theory with stretching effect for the flexure analysis of laminated composite plates", Geomech. Eng., Int. J., 11(5), 671-690.
DOI
|
25 |
El-Haina, F., Bakora, A., Bousahla, A.A., Tounsi, A. and Mahmoud, S.R. (2017), "A simple analytical approach for thermal buckling of thick functionally graded sandwich plates", Struct. Eng. Mech., Int. J., 63(5), 585-595.
|
26 |
Hamidi, A., Houari, M.S.A., Mahmoud, S.R. and Tounsi, A. (2015), "A sinusoidal plate theory with 5-unknowns and stretching effect for thermomechanical bending of functionally graded sandwich plates", Steel Compos. Struct., Int. J., 18(1), 235-253.
DOI
|
27 |
Jabbari, M., Sohrabpour, S. and Eslami, M.R. (2002), "Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads", Int. J. Press. Vessels. Pip., 79(7), 493-497.
DOI
|
28 |
Jabbari, M. and Bahtui, A. and Eslami, M.R. (2009), "Axisymmetric mechanical and thermal stresses in thick short length FGM cylinders", Int. J. Press. Vessels. Pip., 86(5), 296-306.
DOI
|
29 |
Keles, I. and Tutuncu, N. (2011), "Exact analysis of axisymmetric dynamic response of functionally graded cylinders (or disks) and spheres", J. Appl. Mech., 78(6), 610-614.
|
30 |
Kheirkhah, S. and Loghman, A. (2015), "Electric potential redistribution due to time-dependent creep in thickwalled FGPM cylinder based on Mendelson method of successive approximation", Struct. Eng. Mech., Int. J., 53(6), 1167-1182.
DOI
|
31 |
Khoshgoftar, M.J., Rahimi, G.H. and Arefi, M. (2013), "Exact solution of functionally graded thick cylinder with finite length under longitudinally non-uniform pressure", Mech. Res. Com., 51, 61-66.
DOI
|
32 |
Kraus, H. (1980), Creep Analysis, John Wiley & Sons, New York, USA.
|
33 |
Loghman, A. and Wahab, M.A. (1996), "Creep damage simulation of thick-walled tubes using the projection concept", Int. J. Press. Ves. Pip., 67(1), 105-111.
DOI
|
34 |
Loghman, A. and Shokouhi, N. (2009), "Creep damage evaluation of thick-walled spheres using a long-term creep constitutive model", J. Mech. Sci. Tech., 23(10), 2577-2582.
DOI
|
35 |
Moosaie, A. (2016), "A nonlinear analysis of thermal stresses in an incompressible functionally graded hollow cylinder with temperature-dependent material properties", Eur. J. Mech. -A/Solids, 55, 212-220.
DOI
|
36 |
Loghman, A., Ghorbanpour Arani, A., Amir, S. and Vajedi, A. (2010), "Magnetothermoelastic creep analysis of functionally graded cylinders", Int. J. Press. Ves. Pip., 87(7), 389-395.
DOI
|
37 |
Loghman, A., Askari Kashan, A., Younesi Bidgoli, M., Shajari, A.R. and Ghorbanpour Arani, A. (2013), "Effect of particle content, size and temperature on magnetothermo-mechanical creep behavior of composite cylinders", J. Mech. Sci. Tech., 27(4), 1041-1051.
DOI
|
38 |
Loghman, A., Nasr, M. and Arefi, M. (2017), "Nonsymmetric thermomechanical analysis of a functionally graded cylinder subjected to mechanical, thermal, and magnetic loads", J. Therm. Stress., 40(6), 1-18.
DOI
|
39 |
Meziane, M.A.A., Abdelaziz, H.H. and Tounsi, A. (2014), "An efficient and simple refined theory for buckling and free vibration of exponentially graded sandwich plates under various boundary conditions", J. Sandw. Struct. Mater., 16(3), 293-318.
DOI
|
40 |
Mohammadimehr, M., Rostami, R. and Arefi, M. (2016), "Electro-elastic analysis of a sandwich thick plate considering FG core and composite piezoelectric layers on Pasternak foundation using TSDT", Steel Compos. Struct., Int. J., 20(3), 513-543
DOI
|
41 |
Mouffoki, A., Adda Bedia, E.A., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2017), "Vibration analysis of nonlocal advanced nanobeams in hygro-thermal environment using a new two-unknown trigonometric shear deformation beam theory", Smart Struct. Syst., Int. J., 20(3), 369-383.
|
42 |
Penny, R.K. and Marriott, D.L. (1971), Design for Creep, McGraw-Hill, London and New York, USA.
|
43 |
Xuan, F.Z., Chen, J.J., Wang, Z. and Tu, S.T. (2009), "Timedependent deformation and fracture of multi-material systems at high temperature", Int. J. Press. Ves. Pip., 86(9), 604-615.
DOI
|
44 |
Rahimi, G.H., Arefi, M. and Khoshgoftar, M.J. (2012), "Electro elastic analysis of a pressurized thick-walled functionally graded piezoelectric cylinder using the first order shear deformation theory and energy method", Mechanika, 18(3), 292-300.
|
45 |
Rimrott, F.P.J., Mills, E.J. and Marin, J. (1960), "Prediction of creep failure time for pressure vessels", J. Appl. Mech., 27(2), 303-308.
DOI
|
46 |
Sahan, M.F. (2015), "Transient analysis of cross-ply laminated shells using FSDT: Alternative formulation", Steel Compos. Struct., Int. J., 18(4), 889-907.
DOI
|
47 |
Sim, R.G. and Penny, R.K. (1971), "Plane strain creep behavior of thick-walled cylinders", Int. J. Mech. Sci., 13(12), 987-1009.
DOI
|
48 |
Tutuncu, N. and Ozturk, M. (2001), "Exact Solution for Stresses in Functionally Graded Pressure Vessels", Compos.: Part B (Eng), 32(8), 683-686.
|
49 |
Yahia, S.A., Atmane, H.A., Houari, M.S.A. and Tounsi, A. (2015), "Wave propagation in functionally graded plates with porosities using various higher-order shear deformation plate theories", Struct. Eng. Mech., Int. J., 53(6), 1143-1165.
DOI
|
50 |
Yang, Y.Y. (2000), "Time-dependent stress analysis in functionally graded materials", Int. J. Solid Struct., 37(51), 7593-7608.
DOI
|
51 |
You, L.H., Ou, H. and Zheng, Z.Y. (2007), "Creep deformations and stresses in thick-walled cylindrical vessels of functionally graded materials subjected to internal pressure", Compos. Struct., 78(2), 285-291.
DOI
|
52 |
Arefi, M. and Khoshgoftar, M.J. (2014), "Comprehensive piezo-thermo-elastic analysis of a thick hollow spherical shell", Smart. Struct. Syst., Int. J., 14(2), 225-246.
DOI
|
53 |
Zemri, A., Houari, M.S.A., Bousahla, A.A. and Tounsi, A. (2015), "A mechanical response of functionally graded nanoscale beam: An assessment of a refined nonlocal shear deformation theory beam theory", Struct. Eng. Mech., Int. J., 54(4), 693-710.
DOI
|
54 |
Zenkour, A.M. and Arefi, M. (2017), "Nonlocal transient electrothermomechanical vibration and bending analysis of a functionally graded piezoelectric single-layered nanosheet rest on visco-Pasternak foundation", J. Therm. Stress., 40(2), 167-184.
DOI
|
55 |
Abdelbaki, C., Tounsi, A., Habib, H. and Hassan, S. (2017), "Thermal buckling analysis of cross-ply laminated plates using a simplified HSDT", Smart Struct. Syst., Int. J., 19(3), 289-297.
DOI
|
56 |
Arefi, M. (2014), "A complete set of equations for piezomagnetoelastic analysis of a functionally graded thick shell of revolution", Latin Am. J. Solids. Struct., 11(11), 2073-2092.
DOI
|
57 |
Arefi, M. and Bidgoli, E.M.R. (2017), "Elastic solution of a constrained FG short cylinder under axially variable pressure", J. Inst. Eng. (Ind): Series C., 98(3), 267-276.
DOI
|
58 |
Arefi, M. and Rahimi, G.H. (2010), "Thermo elastic analysis of a functionally graded cylinder under internal pressure using first order shear deformation theory", Sci. Res. Essays., 5(12), 1442-1454.
|