• 한국기계가공학회지
• /
• 제18권11호
• /
• pp.83-88
• /
• 2019

In this study, the high-temperature high-pressure vessel was successfully manufactured, which can be used to store pressurized air and to increase the temperature for the mix performance test of high-temperature high-pressure air with coolant (e.g., water). In this research, static structure analysis and transient thermal analysis were performed using the commercial software Midas NFX 2015 R1. Based on the results, the optimized pressure vessel design was carried out. As a result of the optimized design, the minimum stress and minimum weight were found at 120 mm of the vessel thickness, and the optimized pressure vessel was verified. Finally, through manufacture and performance test (e.g., the non-destructive inspection and hydraulic pressure test), the reliability and safety were validated for the designed pressure vessel.

• 한국전기전자재료학회논문지
• /
• 제35권4호
• /
• pp.398-406
• /
• 2022

In order to increase the electrochemical performance of thermal battery anode, LIFT anode having the same weight but a larger lithium content in electrodes was fabricated by mixing lithium, iron and titanium. By applying these electrodes, a single cell and a thermal battery were prepared, and the effect of LIFT anode on electrochemical performance was evaluated. The LIFT-applied single cell presented a better cell performance than LIFe-applied single cell at 500℃ and 550℃. The discharge performance of LIFT-applied single cell, which included the operating time (787s), specific capacity (1,683 Asg^-1), and electrode utilization (80.7%), was improved collectively compared to the LIFe applied single cell (736s, 1,245 As g^-1, and 74.6%) at 500℃. As the discharge progressed, the internal resistance of LIFT anode decreased, because the lithium migration path was formed due to the presence of large titanium particles among iron particles. These results were analyzed in terms of the microstructure of electrode using SEM. Energy density of LIFT-applied single cell also increased by 10% to 142.1 Wh kg^-1 compared to that of LIFe-applied single cell (127.4 Wh kg^-1). In addition, the LIFT-applied single cell presented a stable discharge performance for 6,500s without a short circuit which could occur by molten lithium under an open circuit voltage condition with a high pressure (4 kgf cm^-2). As observed in the high temperature thermal battery performance tests, the voltage and specific capacity of LIFT-applied thermal battery are superior to those of LIFe-applied thermal batteries, indicating that the energy density of LIFT-applied thermal batteries should remarkably increase.

• Journal of Multimedia Information System
• /
• 제7권1호
• /
• pp.73-86
• /
• 2020

The well-known sentence, "You can't manage what you don't measure" suggests the importance of measurement. The Ministry of National Defense (MND) in Korea is measuring the effort of informatization for various dimensions such as validity, adequacy, and effectiveness using the MND evaluation system to obtain positive and significant effects from informatization. MND views the defense informatization domain as divided into the defense informatization policy, the defense informatization project, and the defense informatization level, which can measure the informatization capability of the MND and the armed forces or organizations. Furthermore, it feels there is some limitation, such as those related to ambiguity and reliability, present in the system. To overcome the limitations in the existing system to evaluate the defense informatization policy, this study proposes a revised evaluation framework for the policy of defense informatization, its indicators, and measurement methods.

• 한국컴퓨터정보학회논문지
• /
• 제28권11호
• /
• pp.81-87
• /
• 2023

네트워크 패킷의 메타데이터를 학습한 침입탐지시스템이 최근 많이 제안되었다. 그러나 이러한 방식은 모델 학습에 사용할 메타데이터 생성을 위해 패킷을 분석하는 시간, 그리고 학습 전 메타데이터를 전처리하는 시간이 필요하다. 또한, 특정 메타데이터를 학습한 모델은 실제 네트워크로 유입되는 원본 패킷을 그대로 사용하여 침입을 탐지하는 것이 불가능하다. 이러한 문제를 해결하기 위해 본 논문에서는 패킷 페이로드를 하나의 문장으로 학습시켜 침입을 탐지하는 자연어 처리 기반의 침입탐지시스템을 제안하였다. 제안하는 기법의 성능 검증을 위해 UNSW-NB15와 Transformer 모델을 활용하였다. 먼저, 데이터세트의 PCAP 파일에 대한 라벨링을 실시한 후 2종의 Transformer 모델(BERT, DistilBERT)에 문장 형태로 직접 학습시켜 탐지성능을 분석하였다. 실험 결과 이진분류 정확도는 각각 99.03%, 99.05%로 기존 연구에서 제안한 기법들과 유사하거나 우수한 탐지성능을 보였으며, 다중분류는 각각 86.63%, 86.36%로 더 우수한 성능을 나타냄을 확인하였다.

• 한국군사과학기술학회지
• /
• 제21권4호
• /
• pp.481-488
• /
• 2018

This study suggest the improvement of the CFRP adhesive mixing ratio about acoustic window to enhance SONAR performance. The CFRP of submarine is produced by allocation an acoustic window zone by the beam width of SONAR sensors. During the sea trial, SONAR system's bearing and range accuracy data is not in tolerance due to debonding phenomenon on CFRP. The inappropriate mixing ratio of adhesives caused that peeling phenomenon occurred in the acoustic window part, which is the reason for the deterioration of SONAR sensors performance. The report includes explanation of test procedure of SONAR, root cause analysis, CFRP manufacturing procedure, laboratory tests results, and proof of the performance at the sea trial.

• 한국군사과학기술학회지
• /
• 제18권6호
• /
• pp.816-821
• /
• 2015

In this paper, an in-flight prediction method of thrust profiles for solid rocket motors is proposed. Actually, it is very difficult to have detailed information about the performance of the rocket motors beforehand because it is quite sensitive to combustion environments. To overcome this problem, we have developed an algorithm for generating in-flight prediction of rocket motor performance in realistic environments via a reference burnback profile and accelerations measured at a short time-interval just after launch. The performance is evaluated through a lot of flight test results.

• 제어로봇시스템학회논문지
• /
• 제21권9호
• /
• pp.843-848
• /
• 2015

In this paper, The ARR-TSE (Automatic Range Restore - Triangulation based target Size Estimator) algorithm is presented for IIR (Imaging Infrared) seeker. The target size is important information for the IIR target tracking. The TSE (Triangulation based target Size Estimator) algorithm has suitable performance to estimate target size for static IIR target. but, the performance of the algorithm can be decreased by noise. In order to decrease influence of noise, we propose the ARR-TSE algorithm. The performance of proposed method is tested at target intercept scenario. The simulation results show that the proposed algorithm has the accurate target size estimating performance.

• Journal of Positioning, Navigation, and Timing
• /
• 제3권2호
• /
• pp.37-44
• /
• 2014

The most effective method to overcome GPS jamming problem is to use an adaptive array antenna which has the capability of beamforming or nulling to a certain direction. In this paper, Space Time Adaptive Processing (STAP) beamforming algorithm of four elements array antenna will be designed and the anti-jamming performance will be analyzed. According to the analysis, the signal to noise ratio (SNR) and anti-jamming performance can be enhanced by beamforming algorithm. Also, the time tap effect of STAP algorithm will be analyzed theoretically and verified with array antenna modeling and simulation. Specially, the cautious selection of reference time tap in STAP can prevent the degradation of position accuracy performance.

• 한국군사과학기술학회지
• /
• 제19권1호
• /
• pp.1-8
• /
• 2016

In this paper, we have described the performance improvement of surveillance radar to prevent damage or malfunction of surveillance radar RF head unit due to the strong reflections caused by artificial obstacles at close range. We have proposed a technique to improve the performance of the RF head unit as a solution to overcome the limitations of the operating system and improve radar performance. We have verified the effectiveness of the improvement by comparing the before and after results applied to actual system.

• 한국군사과학기술학회지
• /
• 제17권6호
• /
• pp.786-792
• /
• 2014

In this paper, we propose a novel method which can be applied to test and verify the stabilization-tracking performance of Gun/Turret Driving System(GTDS) for Light Armed Helicopter(LAH). In real system, GTDS is connected to TADS/SMC and drived to aim at the target with 20mm gun. But each equipment is separately developed during exploratory development stage, so GTDS cannot be tested under real system state. We suggest new configuration of test system for evaluating the stabilization-tacking performance, in which TADS and SMC are replaced by vision acquisition unit and processing unit, respectively.