• 융합신호처리학회논문지
• /
• 제18권1호
• /
• pp.25-30
• /
• 2017

현재 곡물선별기는 대부분 CCD 광학카메라를 이용하여 불량품을 찾아내고 있다. 본 논문에서는 CCD 카메라를 이용함과 동시에 근거리적외선 센서의 수분측정 방법을 추가하여 곡물선별기의 선별력향상을 목표로 한다. 그리고 구현한 알고리즘을 곡물선별기에 실제로 적용할 수 있도록 근거리적외선 영상보드 시스템을 개발하여, 원료의 내부 수분 함량을 고속으로 체크하여 일정함량 미달인 경우 불량으로 간주하여, 불량품을 실시간으로 제거하는 곡물선별기 시스템을 개발하고자 한다.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1458-1464
• /
• 2007

현재 국내 외 제조 산업은 기업 시스템의 노후화 등의 많은 문제들이 발생하고 있다. 현재의 자동차 부품공장에서의 불량품에 대한 처리방법은 제품의 생산이 완료된 후 테스트 단계를 거쳐 양품과 불량품을 분류하고 불량품이 발생하면 생산을 중단하고 생산라인의 상태를 점검하는 방식이다. 본 연구에서는 자동차 부품공장의 생산라인에서 불량품 생산을 줄이고 생산라인 가동시간의 지연을 줄이기 위한 생산성 향상을 위한 모니터링 솔루션에 대해 제안한다. 생산성 향상을 위한 모니터링 솔루션은 제품 조립의 각 단계마다 테스트를 통해 데이터를 수집하고, 수집한 데이터에서 불량이 예상되면 알람기능을 이용해서 경고를 하도록 설계하였다. 경고 메시지를 통해 불량이 예상되는 곳에 대해 조기에 조치하여 불량품이 나올 확률을 최소한으로 하고 제품의 생산지연 시간을 줄이는 것을 목표로 한다.

• 한국중재학회지:중재연구
• /
• 제10권1호
• /
• pp.92-113
• /
• 2000

Products liability refers to the liability of any or all parties along the chain of manufacture of any product for damage caused by that product. This includes the manufacturer of component parts (at the top of the chain), an assembling manufacturer, the wholesaler, and the retail store owner (at the bottom of the chain). Products containing inherent defects that cause harm to a consumer of the product, or someone to whom the product was loaned, given, etc., are the subjects of products liability suits. The goal of products liability system should be to maximize consumer welfare by efficiently providing just compensation for injuries incurred and deterring future injuries without unreasonably impeding the supply of the goods and services to consumers. Some advanced countries, apart from relying on products liability systems, also apply other policies and legislation directly aimed at the safety of the consumer. The application of general safety policies as well as products liability rules is not costless. An efficient system will not eliminate risk from society. An efficient system ... that maximises consumer welfare ... maximises the benefits while minimising the costs. Products liability claims can be based on negligence, strict liability, or breach of warranty of fitness depending on the jurisdiction where the claim is based. In view of international business and law circumstances, it should be stressed that international enterprises in Korea should consider how to cope with the situation of international transaction. International enterprises should have a correct perception about products liability which is to contribute the stabilization and improvement of the people's life and the sound develpement of the national economy. Products liability system creates incentives that influence behaviour and performance in ways that are desirable, such as more diligent monitoring to prevent defective products from reaching the market-place. At the same time, any liability system will impose burdens that are undesirable, such as greater costs imposed on business and consumers and reduced avaiability of consumer goods. The concern for society is to balance. The ideal situation is where the cost imposed on producers of goods and services pushes them to a desirable level of care but not so far that producers reach undesirable level of caution that may deprive consumers unnecessarily of the benefits from new and innovative products.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제8권2호
• /
• pp.94-99
• /
• 2008

The replica of silicone mold which can produce the test samples and the market-displayable products without making expensive metallic patterns is advantageous because it incurs less cost than the ordinary method that manufactures the products from the metallic patterns. However, the production of the products using silicone mold should require a technician with professional knowledge about the metallic patterns every time. Thus we tried to judge whether a forming analysis software for iron molding can be applied to silicon molding in this paper. In other words, this paper suggests a method to use a computer simulator from the designing step of the silicone mold, which is the most important part in making replica using simple silicone molds to the step of pouring the cast. The paper shows that if the know-how of a professional worker is provided in advance, an amateur worker can easily produce silicone molds of the best quality, the defective rate of the products will be decreased, and the replica will have a more complete status. By doing so, we suggested a possibility for reducing the delivery time at the production sites and for improving the product quality.

• 한국컴퓨터정보학회논문지
• /
• 제28권4호
• /
• pp.105-112
• /
• 2023

농산물 선별 시스템은 작물의 형태를 보전하기 위하여 비파괴적인 선별이 주로 사용된다. 이러한 비파괴 선별 기술로는 가시광선, 근적외선, 엑스선, 감마선 등의 광학적 특성을 이용하고 있으며 본 논문에서는 엑스선을 이용한 선별을 이용한다. 엑스선 영상은 엑스선의 밀도에 따라 그레이 영상으로 생성되어 육안으로 시료의 결함을 감지하기가 어렵다. 미세한 결함을 발견하기 위해서는 영상을 확대하거나 픽셀의 범위를 수정하여 적정한 픽셀의 영역만을 표시하여 결함을 탐지해야 한다. 이런 작업은 비효율적이다. 따라서 본 논문은 엑스선의 광역적인 밀도와 지역적인 밀도에 대한 상대적인 밀도를 측정하여 색상화된 결함을 표시하는 새로운 방법을 제안한다. 하나의 픽셀에 대한 상대적인 밀도는 주위 픽셀과의 상대적인 차이를 나타내며, 이런 픽셀을 정상과 결함으로 나타내는 엑스선 영상의 색상화 방법도 제안한다. 실험에서는 육안으로 볼 수 없는 농작물의 병해충 또는 새싹 부분을 특정 색으로 색상화 하여 농산물 선별 시스템에 활용할 수 있게 하였다. 제안된 방법은 엑스선을 이용한 선별 시스템에 적용되어 농산물 선별 시스템뿐만 아니라 가공식품, 부품 제조와 같은 제조 공정에서 사용되어 불량품을 선별하는 방법에 적극적으로 이용될 수 있을 것이다.

• 한국전자통신학회논문지
• /
• 제6권4호
• /
• pp.517-522
• /
• 2011

수작업에 의한 기존의 프로젝션(projection) 용접시스템은 작업자의 부주의로 인한 불량이 자주 발생한다. 본 논문에서는 비전카메라를 사용하여 부품과 제품의 인식, 용접 및 수량 관리를 자동으로 수행하는 프로젝션 용접시스템을 제안한다. 제안 시스템은 비전카메라를 사용하여 용접에 사용되는 부품의 유무와 놓인 상태를 검사한다. 그리고 부품의 용접 후에는 제품 수량 카운터와 드레싱 등의 항목을 자동 갱신한다. 기존 시스템과의 비교 실험을 통해 불량률을 감소시키고 생산성을 높일 수 있음을 보인다.

• Journal of Microbiology and Biotechnology
• /
• 제17권3호
• /
• pp.408-413
• /
• 2007

Putrescine has a negative effect on health and is also used as an indicator of quality on meat products. We investigated the genes involved in putrescine production by Serratia liquefaciens IFI65 isolated from a spoiled Spanish dry-cured ham. We report here the genetic organization of its ornithine decarboxylase encoding region. The 5,506-bp DNA region showed the presence of three complete and two partial open reading frames. Putative functions have been assigned to several gene products by sequence comparison with proteins included in the databases. The second gene putatively coded for an ornithine decarboxylase. The functionality of this decarboxylase has been experimentally demonstrated by complementation to an E. coli defective mutant. Based on sequence comparisons of some enterobacterial ornithine decarboxylase regions, we have elaborated a hypothetical pathway for the acquisition of putrescine biosynthetic genes in some Enterobacteriaceae strains.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1118-1122
• /
• 2005

In order to keep production balance at a mixed-model assembly line and a painting line, large WIP(Work- In-Process) inventories are required between two lines. To increase the efficiency of line handling through reducing the inventories under this circumstance, this paper concerns with a sequencing problem for a mixed-model assembly line that includes a painting line where the uncertain elements regarding the defective products exist. Then, we formulate a new type of the sequencing problem minimizing the line stoppage time and the idle time with forecasting the supply time of the products from the painting line. Finally, we examine the effectiveness of the proposed sequencing through computer simulations.

• 산업경영시스템학회지
• /
• 제22권53호
• /
• pp.79-88
• /
• 1999

This paper presents an integral model for product safety and product liability resulting from a defective product. The essence of the paper is the process of supply of manufacturing products which satisfy the product liability and the product safety in terms of consumers expectation levels. The main criteria of the product safety is the hazard level which involves in the severity and frequency. The proposed model shows the process to supply the manufactured products under the conditions that they are suitable in comparison of hazard level and safety level established by each company. If the product do not meet the safety level, this paper proposes that four different types of PL and PS countermeasures for the risk types are forward, respectively.

• Design & Manufacturing
• /
• 제13권3호
• /
• pp.29-34
• /
• 2019

Cell phone injection is characterized by its small size and thinness. In addition, the product has a short cycle time, requiring a very short production schedule. To produce more accurate products faster, data from experience in producing similar products is required. In this study, two mobile phone models are presented. In this study, the quality problems caused by molding analysis and actual injection molding were analyzed and made into a database. As a result, it was considered that all the defects in the molding analysis do not affect the product in some cases, rather than appear as defects in the actual product. All defects shown in the molding analysis can be made into a database, and based on this data, it will be possible to obtain an effect that can predict more accurately whether it will cause problems after injection.