• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.9 s.339
• /
• pp.73-80
• /
• 2005

The Turbo decoders based on Log-MAP decoding algorithm inherently requires large amount of memory and intensive complexity of hardware due to iterative decoding, despite of excellent decoding efficiency. To decrease the large amount of memory and reduce hardware complexity, the result of previous research. And this paper design the Turbo decoder applicable to the 3G W-CDMA systems. Through the result of previous research, we decided 5-bits for the received data 6-bits for a priori information, and 7-bits for the quantization state metrics. The error correction term for $MAX^{*}$ operation which is the main function of Log-MAP decoding algorithm is implemented with very small hardware overhead. The proposed Turbo decoder is synthesized in $0.35\mu$m Hynix CMOS technology. The synthesized result for the Turbo decoder shows that it supports a maximum 9Mbps data rate, and a BER of $10^{-6}$ is achieved(Eb/No=1.0dB, 5 iterations, and the interleaver size $\geq$ 2000).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.6
• /
• pp.459-468
• /
• 2003

This paper proposes a novel low-cost and high-speed Reed-Solomon (RS) decoder based on a new degree computationless modified Euclid´s (DCME) algorithm. This architecture has quite low hardware complexity compared with conventional modified Euclid´s (ME) architectures, since it can remove completely the degree computation and comparison circuits. The architecture employing a systolic away requires only the latency of 2t clock cycles to solve the key equation without initial latency. In addition, the DCME architecture using 3t＋2 basic cells has regularity and scalability since it uses only one processing element. The RS decoder has been synthesized using the 0.25${\mu}{\textrm}{m}$. Faraday CMOS standard cell library and operates at 200MHz and its data rate suppots up to 1.6Gbps. For tile (255, 239, 8) RS code, the gate counts of the DCME architecture and the whole RS decoder excluding FIFO memory are only 21,760 and 42,213, respectively. The proposed RS decoder can reduce the total fate count at least 23% and the total latency at least 10% compared with conventional ME architectures.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.3-11
• /
• 2013

Recently, a plenty of researches have been conducted using the massively parallel processing of GPU for the implementation of communication system. In this paper, we tried to reduce software simulation time applying GPU with sliding block method to Viterbi decoder in DVB-T system which is one of European DTV standards. First of all, we implement DVB-T system by CPU and estimate cost time whereby the system processes one OFDM symbol. Secondly, we implement Viterbi decoder by software using NVIDIA's massive GPU processor. In our work, stream process method is applied to reduce the overhead for data transfer between CPU and GPU, as well as coalescing method to lower the global memory access time. In addition, data structure design method is used to maximize the shared memory usage. Consequently, our proposed method is approximately 11 times faster in 2K mode and 60 times faster in 8K mode for the process in Viterbi decoder.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.7
• /
• pp.36-46
• /
• 2017

The turbo code, an error correction code, needs a long decoding time since the same decoding process must be repeated several times in order to obtain a good BER performance. Thus, parallel processing may be used to reduce the decoding time, in which case there may be a memory contention that requires additional buffers. The QPP interleaving has been proposed to avoid such case, but there is still a possibility of memory contention when a decoder is constructed using the so-called double flow technique. In this paper, we propose an even-odd cross mapping technique to avoid memory conflicts even in decoding using the double-flow technique. This method uses the address generation characteristic of the QPP interleaving and can be used to implement the interleaving circuit between the decoding blocks and the LLR memory blocks. When the decoder implemented by applying the double flow and the proposed methods is compared with the decoder by the conventional MDF techniques, the decoding time is reduced by up to 32% with the total area increase by 8%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5C
• /
• pp.371-381
• /
• 2005

In this paper, we propose an advanced hardware architecture for the CAVLC entropy encoder/decoder engine for real time video compression. The CAVLC (Context-based Adaptive Variable Length Coding) is a lossless compression method in H.264/AVC and it has high compression efficiency but has computational complexity. The reference memory size is optimized using partitioned storing method and memory reuse method which are based on partiality of memory referencing. We choose the hardware architecture which has the most suitable one in several encoder/decoder architectures for the mobile devices and improve its performance using parallel processing. The proposed architecture has been verified by ARM-interfaced emulation board using Altera Excalibur and also synthesized on Samsung 0.18 um CMOS technology. The synthesis result shows that the encoder can process about 300 CIF frames/s at 150MHz and the decoder can process about 250 CIF frames/s at 140Mhz. The hardware architectures are being used as core modules when implementing a complete H.264/AVC video encoder/decoder chip for real-time multimedia application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7A
• /
• pp.1090-1098
• /
• 1999

In this paper ERP-4 viterbi decoder for magnetic disk read channel is designed. The viterbi decoder consists of ACS circuit, path memory circuit, minimum detection circuit, and output selection circuit. In the viterbi decoder the number of state is reduced from 8 to 6 using (1,7) RLL codes and modulo comparison based on 2's complement arithmetic is applied to handle overflow problem of ACS module. Also to determine the correct symbol values in nonconvergent condition of path memory, pipelined minimum detector which determines path with minimum state metric is used. The EPR-4 viterbi decoder is designed using 0.35${\mu}{\textrm}{m}$ CMOS technology and consists of about 15,300 transistors and has 250 Mbps data rates under 3.3 volts.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10C
• /
• pp.805-812
• /
• 2008

H.264 technology is considered as the heart of the next-generation video codec standard. Europe and other countries have actually specified H.264 technology as the video codec standard for HD broadcasting. However, due to the complexity of algorithm, it is still a difficult job to implement HD-level H.264 decoders in real-time software. In this paper, I have restricted a part of the decoding process, in order to implement an H.264 software video decoder which guarantees a real-time operation, and suggest an H.264 decoder that adaptively selects the algorithm to minimize image degradation. Performance of the suggested H.264 decoder was compared and verified through a PC simulation. As a consequence, when the suggested decoder was used in an environment where real-time decoding was difficult, it has achieved the minimal image degradation as well as real-time decoding in most cases.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1579-1588
• /
• 2014

The LAN method is the most widely used in domestic high-speed internet access and rapidly moving to 1 Gbps Ethernet from 100 Mbps one to provide high-speed services such as UHD TV. The 1000BASE-T PHY with 4 pairs UTP transmits a PAM-5 signal at the 125 MHz clock per each pair to achieve 1 Gbps rate. In order to correct errors over the channel, the transmitter uses a TCM which is combined the convolutional encoder and PAM-5, and the receiver uses the Viterbi decoder. In this paper, we implement a Viterbi decoder which can correct two pair errors and operate at the least 125 MHz clock speed. Finally, we will verify the error correction function and the operating speed of the implemented decoder with a logic analyzer.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.3
• /
• pp.16-33
• /
• 1993

New decoding algorithm of double-error-correction Reed-Solmon codes over GF(2$^{8}$) for optical compact disks is proposed and decoding algorithm of RS codes with triple-error-correcting capability is presented in this paper. First of all. efficient algorithms for estimating the number of errors in the received code words are presented. The most complex circuits in the RS decoder are parts for soving the error-location numbers from error-location polynomial, so the complexity of those circuits has a great influence on overall decoder complexity. One of the most known algorithm for searching the error-location number is Chien's method, in which all the elements of GF(2$^{m}$) are substituted into the error-location polynomial and the error-location number can be found as the elements satisfying the error-location polynomial. But Chien's scheme needs another 1 frame delay in the decoder, which reduces decoding speed as well as require more stroage circuits for the received ocode symbols. The ther is Polkinghorn method, in which the roots can be resolved directly by solving the error-location polynomial. Bur this method needs additional ROM (readonly memory) for storing tthe roots of the all possible coefficients of error-location polynomial or much more complex cicuit. Simple, efficient, and high speed method for solving the error-location number and decoding algorithm of double-error correction RS codes which reudce considerably the complexity of decoder are proposed by using Hilbert theorems in this paper. And the performance of the proposed decoding algorithm is compared with that of conventional decoding algorithms. As a result of comparison, the proposed decoding algorithm is superior to the conventional decoding algorithm with respect to decoding delay and decoder complexity. And decoding algorithm of RS codes with triple-error-correcting capability is presented, which is suitable for error-correction in digital audio tape, also.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6C
• /
• pp.601-609
• /
• 2002

The efficient Viterbi decoder that supports full data-rate output of DAB system was proposed. Viterbi decoder consumes lots of computational load and should be designed to be fast specific hardware. In this paper, SST scheme was adopted for Viterbi decoder with puncturing to reduced the power consumption. Puncturing vector tables are modified and re-arranged to be designed by a hardwired logic to save the system area. New re-scaling scheme which uses the fact that the difference of the maximum and minimum of the path metric values is bounded is proposed. The proposed re-scaling scheme optimizes the wordlength of path metric memory and greatly reduces the computational load for re-scaling by controlling MSB of path metric memory. Another saving of computation is done by proposed algorithm for branch metric calculation, which makes use of pre-calculated metric values. The designed Viterbi decoder was synthesized using SAMSUNG 0.35$\mu$ standard cell library and occupied small area and showed lower power consumption.