• 한국재료학회지
• /
• 제17권11호
• /
• pp.612-617
• /
• 2007

Both photoluminescence and thermal characteristics for $SrAl_2O_4:Eu^{+2},\;Dy^{+3}$ phosphors synthesized with various aluminum compounds (${\alpha}-Al_2O_3$, ${\gamma}-Al_2O_3$, amorphous-$Al_2O_3$ and $Al(OH)_3)$ were investigated in this study. The formation temperature of the host $SrAl_2O_4$ crystal is changed by these various aluminum compounds, as a result of the different thermal decomposition temperature of $SrCO_3$ phase. Among these compounds, the amorphous-$Al_2O_3$ phase shows the lowest formation temperature of the host $SrAl_2O_4$ crystal. The PL emission and excitation spectra of $SrAl_2O_4:Eu^{+2},\;Dy^{+3}$ phosphor are not affected by these aluminum compounds. After the removal of the Xenon lamp excitation (360 nm), however, the excellent longphosphorescent property of the phosphor is obtained by the amorphous-$Al_2O_3$ phase, although the decay time for all phosphors decrease exponentially.

• Journal of Information Display
• /
• 제12권1호
• /
• pp.23-27
• /
• 2011

The correlation between the temporal and spatial variations of the elastic constant and temperature change was examined for a light guide plate (LGP) adopted in the edge-lit light-emitting-diode backlight for mobile applications, using the micro- Brillouin light scattering method. The velocity of sound and the elastic constant $C_{11}$ of an LGP made from bisphenol-A polycarbonate (PC) were investigated as functions of temperature, time, and position on the LGP. The temporal variation of $C_{11}$ exhibited an exponential decay, while the spatial variation of $C_{11}$ reflected the temperature distribution on the LGP. The glass transition temperature of the PC LGP was found to be located at $155^{\circ}C$. The result showed that systematic transformation between the elastic property and the temperature is possible and that the temperature distribution on the bulk LGP can be accurately probed via the present experiment method, without using any special temperature measurement equipment.

• 한국식품영양학회지
• /
• 제30권3호
• /
• pp.591-598
• /
• 2017

To prolong the shelf-life of strawberry, samples were treated with gel packs containing slow-released chlorine dioxide($ClO_2$) gas at 3~7 ppm for 6 days at room temperature. The weight loss and decay ratio as well as changes in pH, color and texture properties of the treated samples were investigated. The weight of the control and $ClO_2$ gas treated samples decreased slightly, but the weight of the control changed faster than those of the $ClO_2$ gas treated samples during the storage period. The decay ratio of control was higher than those of the $ClO_2$ gas treatments since 4 days of storage. The pH and acidity in the control and in the $ClO_2$ gas treated samples were no differences during storage period. The lightness of strawberry decreased during storage, but there was no difference in lightness among the treatments even when storage time was extended. The redness and yellowness of the control showed higher change than those of the $ClO_2$ gas treatments during 6 days. The firmness of the control changed more rapidly than those of the $ClO_2$ gas treatments during 6 days. Especially, the samples treated 3 and 5 ppm $ClO_2$ gas were the least changed. And the scores for appearance, firmness and overall acceptance control and 7 ppm $ClO_2$ gas treatment decreased more rapidly than those of 3 and 5 ppm treatment.

• 헤리티지:역사와 과학
• /
• 제56권1호
• /
• pp.118-130
• /
• 2023

노거수 내부의 대규모 공동이나 부후는 나무가 쓰러지거나 부러지는 주요 원인 중 하나로, 구조적으로 약해진 나무는 강풍이나 폭설에 더욱 취약하다. 특히 노거수는 강풍, 폭설 등과 같은 외부 충격 발생 시 피해 가능성이 상대적으로 더 높고 한번 훼손되면 회복이 어렵기 때문에 예방적 관리가 중요하다. 이에, 천연기념물 이팝나무 7개소를 대상으로 육안교목평가(VTA)와 나무단층영상촬영을 실시하여 노거수의 물리적 생육상태를 평가하였다. 육안교목평가 결과, 상대적으로 '양산 신전리 이팝나무'와 '순천 평중리 이팝나무', '광양읍수와 이팝나무'는 가지의 연결각도가 좁고, 부착력이 약한 것으로 분석되었으나 수관이 왜소하고 하중 부담이 낮아 추가적인 보호시설 설치보다는 위험징후에 대한 정기 모니터링이 필요한 것으로 나타났다. 나무단층영상촬영 결과 이팝나무 전체적으로 내부에 공동이 탐지되었고 '순천 평중리 이팝나무(70.8%)', '고창 중산리 이팝나무(66.8%)', '광양읍수와 이팝나무(56.9%)' 순으로 공동이나 부후로 추정되는 면적이 넓은 것으로 조사되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.338-338
• /
• 2009

To date, rubbing has been widely used to align LC molecules uniformly. Although rubbing can be simple, it has fundamental problems such as the generation of defects by dust and static electricity, and difficulty in achieving a uniform LC alignment on a large substrate. Therefore, noncontact alignment has been investigated. Ion beam induced alignment method, which provides controllability, nonstop process, and high resolution display. We investigated the high pretilt angle effects on electro-optical properties of ion beam (IB)-irradiated liquid crystal cells. on a blended polymer surface. High pretilt angle of liquid crystals IB-irradiated on a blended polymer surface including such as 5% and 10% of homeotropic polymer contents can' be achieved. The threshold voltages of IB-irradiated twisted nematic (TN) cells on a blended polymer surface decrease with increasing the pretilt angle. Also, the rising time of IB-irradiated TN cells decreases with increasing the pretilt angle. However the decay time of IB-irradiated TN cells increases with increasing the pretilt angle. Consequently, the electro-optical properties of IB-irradiated TN cells depend strongly on the pretilt angle in a blended polymer surface.

• 폴리머
• /
• 제25권5호
• /
• pp.719-727
• /
• 2001

유기광도전체에 있어서의 액정은 종래의 분자 배향성을 가지지 않는 비정성 고체계와는 달리 분자 배향성을 가지기 때문에 분자 사이의 질서도가 높아지게 되고, charge-carrier의 hopping을 방해하는 hopping site의 공간적인 틈이 작아져 고 이동도의 특성을 가질수 있다. 본 연구에서는 유기광도전체의 전하 수송층에 액정5CT를 혼합하여, charge-carrier수송특성에 있어서의 액정5CT의 영향을 관찰하였다. 액정5CT를 함유한 유기광도전체는 액정의 혼합비가 증가함에 따가 초기전위는 증가하였으며, 암감쇄는 감소하는 경향을 나타내었다. 감도는 5CT를 TNF와 OXD 각자에 대하여 40 wt%로 혼합한 시료의 경우에 가장 우수하게 나타났다. 형광거동을 관찰한 결과, 이는 전하수송재료와 액정5CT의 전하 수송착체에 의한 것으로, 액정5CT를 TNF와 OXD 각각에 대하여 40 wt%로 혼합한 시료의 경우가 다른 시료에 비해 전하 수송착체가 가장 잘 형성되어, 성공을 잘 수송하기 때문으로 나타났다.

• 한국재료학회지
• /
• 제26권9호
• /
• pp.504-511
• /
• 2016

To prepare $Mn^{4+}$-activated $K_2TiF_6$ phosphor, a precipitation method without using hydrofluoric acid (HF) was designed. In the synthetic reaction, to prevent the decomposition of $K_2MnF_6$, which is used as a source of $Mn^{4+}$ activator, $NH_5F_2$ solution was adopted in place of the HF solution. Single phase $K_2TiF_6$:$Mn^{4+}$ phosphors were successfully synthesized through the designed reaction at room temperature. To acquire high luminance of the phosphor, the reaction conditions such as the type and concentration of the reactants were optimized. Also, the optimum content of $Mn^{4+}$ activator was evaluator based on the emission intensity. Photoluminescence properties such as excitation and emission spectrum, decay curve, and temperature dependence of PL intensity were investigated. In order to examine the applicability of this material to a white LED, the electroluminescence property of a pc-WLED fabricated by combining the $K_2TiF_6$:$Mn^{4+}$ phosphor with a 450 nm blue-LED chip was measured.

• Nuclear Engineering and Technology
• /
• 제24권1호
• /
• pp.63-74
• /
• 1992

뮤온 촉매 핵융합에서 뮤온 분자이온 dt$\mu$의 공명 형성율을 수소밀도와 온도의 함수로서 계산하였다. 부분파 방법을 도입하여 t$\mu$와 중양자 사이의 탄성산란 단면적을 구하였고, 충격근사를 써서 여기상태의 [(dt$\mu$)dee]＊의 천이를 구속상태 형성인자로 도출하였다. 여기상태 dt$\mu$의 탈여기 기작으로는 방사선 방출, 오오져, 그리고 충돌 탈여기를 고려하였고 이들에 대한 탈여기폭과 역붕괴폭을 계산하였다. 계산된 반응폭들로부터 공명 상태 dt$\mu$의 형성단면적을 구하고 이것을 써서 수소의 밀도와 온도의 함수로서 dt$\mu$-d, dt$\mu$-t 공명 형성율을 계산하였다. 계산결과로 부터 공명형성율은 수소의 밀도와 더불어 증가하고, 상대충돌 에너지가 공명에너지와 같아지는 온도에서 최대값을 갖는다는 것을 알았다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권3호
• /
• pp.132-138
• /
• 2003

We investigated the polarization retention characteristics of ferroelectric capacitors with $Pb(Zr,Ti)O_3$ (PZT) thin films which were fabricated by different deposition methods. In thermally-accelerated retention tests, PZT films which were prepared by a chemical solution deposition (CSD) method showed rapid decay of retained polarization charges as the thickness of the films decreased down to 100 nm, while the films which were grown by metal organic chemical vapor deposition (MOCVD) retained relatively large non-volatile charges at the corresponding thickness. We concluded that in the CSD-grown films, the thicker interfacial passive layer compared with the MOCVD-grown films had an unfavorable effect on retention behavior. We observed the existence of such interfacial layers by extrapolation of the total capacitance with thickness of the films and the capacitance of these layers was larger in MOCVD-grown films than in CSD-grown films. Due to incomplete compensation of surface polarization charges by the free charges in the metal electrodes, the interfacial field activated the space charges inside the interfacial layers and deposited them at the boundary between the ferroelectric layer and the interfacial layer. Such space charges built up an internal field inside the films, which interfered with domain wall motion, so that retention property at last became degraded. We observed less imprint which was a result of less internal field in MOCVD-grown films while large imprint was observed in CSD-grown films.

• 한국식품과학회지
• /
• 제35권1호
• /
• pp.155-158
• /
• 2003

겨자 페이스트의 시간의존성을 관찰하기 위해 총고형분 함량(18, 21, 24, 27, 30%)과 전단속도$(15,\;20,\;25\;s^{-1})$를 달리하여 시간-전단응력 변화가 분석되었으며, 이들 데이터들은 Figoni 및 Shoemaker 모델, Weltman 모델, Hahn 모델에 적용하여 정량적으로 평가되었다. 일정한 전단속도에서 겨자페이스트의 농도가 증가함에 따라 보다 높은 전단응력을 나타냈으며, 3종류의 모델식에서의 각 매개변수들은 농도에 따라 일정한 경향을 나타내어 겨자 페이스트의 시간의존 유동 특성에는 다른 분산식품들과 마찬가지로 농도에 의해 크게 영향을 받음을 알 수 있었다. 그러나 일정 농도를 기준으로 전단속도에 따른 시간의존성 변화에서는 25%와 27%농도를 가진 시료를 제외하고는 각 매개변수 값들의 차이는 거의 없는 것으로 나타났다. 시간의존 유동특성 모델에 적용한 결과, Weltman 모델이 다른 모델식에 비해 가장 높은 결정계수$(R^2)$을 보여주고 있어 Weltman 모델식이 겨자 페이스트 시간의존성을 나타내는 가장 적합한 모델식임을 알 수 있었다.