• Smart Structures and Systems
• /
• v.18 no.6
• /
• pp.1203-1215
• /
• 2016

When strain sensing cables are under long-term stress and cyclic loading, creep may occur in the jacket material and each layer of the cable structure may slide relative to other layers, causing fatigue in the cables. This study proposes a device for testing the fatigue characteristics of three types of cables operating under different conditions to establish a decay model for observing the patterns of strain decay. The fatigue characteristics of cables encased in polyurethane (PU), GFRP-reinforced, and wire rope-reinforced jackets were compared. The findings are outlined as follows. The cable strain decayed exponentially, and the decay process involved quick decay, slow decay, and stabilization stages. Moreover, the strain decay increased with the initial strain and tensile frequency. The shorter the unstrained period was, the more similar the initial strain levels of the strain decay curves were to the stabilized strain levels of the first cyclic elongation. As the unstrained period increased, the initial strain levels of the strain decay curves approached those of the first cyclic elongation. The tested sensing cables differed in the amount and rate of strain decay. The wire rope-reinforced cable exhibited the smallest amount and rate of decay, whereas the GFRP-reinforced cable demonstrated the largest.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.377-380
• /
• 2008

In this work, we measured the spatiotemporal surface charge distribution by the longitudinal electro-optic amplitude modulation method with BSO single crystal to investigate the decay and diffusion characteristics of surface charges in three types of MgO. The speed of decay and diffusion of two different kinds doped MgO is compared with those of pure MgO. The difference in the characteristics of the decay and diffusion between the electron and ion surface charges is investigated separately. We found that the rate of ion decay is the major factor that makes the difference of the temporal variation of wall voltage among different types doped MgO.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.3
• /
• pp.219-228
• /
• 1992

The steady state and decay characteristics of primary fluorescence of twelve clones of phytoplankton were investigated in vivo. At 380-435nm region, intense fluorescence emission spectra were obtained from the all phytoplankton, examined', The primary fluorescence of phytoplankton in different growth states was examined In order to find out fluorophores for the observed fluorescence, eight different pteridine derivatives in phosphate buffer solution were examined for their fluorescence characteristics and compared with those of phytoplankton. Fluorescence lifetimes $(\tau)$ and decay curves were compared with standard solution of candidate organic compounds. Decay kinetics of observed fluorescence were shown as hi- and tri-exponential decay curves with 430nm cut-off filter for phytoplankton. Comparison between fluorescence characteristics of bacteria and phytoplankton showed distinct differences for their steady state fluorecence spectra and decay kinetics.

• Journal of Energy Engineering
• /
• v.10 no.4
• /
• pp.342-348
• /
• 2001

A new design concept for a decay heat removal system in a liquid metal reactor is proposed. The new design utilizes a thermosyphon to enhance the heat removal capacity and its heat transfer characteristics are analyzed against the current PSDRS (Passive Safety Decay heat Removal System) in the KAL IMER (Korea Advanced LIquid MEtal Reactor) design. The preliminary analysis results show that the new design with a thermosyphon yields substantial increase of 20∼40% in the decay heat removal capacity compared to the current design that do not have the thermosyphon. The new design reduces the temperature rise in the cooling air of the system and helps the surrounding structure in maintaining its mechanical integrity for long term operation at an accident. Also the analysis revealed the characteristics of the interactions among various heat transfer modes in the new design.

• Nuclear Engineering and Technology
• /
• v.29 no.4
• /
• pp.320-326
• /
• 1997

The nuclide transport in the one-dimensional porous medium is considered as a first step in developing a decay chain transport in multidimensional inhomogeneous media. A method of solving conventional advection-dispersion equation with decay chain of arbitrary length by using the method of characteristics (MOC) is introduced. In specific cases where the advection are dominant rather than dispersion, the method is known to be useful : one of the most distinctive advantages in applying the model is that the MU minimizes the numerical dispersion, which is distinguished in such common numerical schemes as finite element method and finite difference method. The suggested model is considered to be effective through several illustrations for the case that decay chain of arbitrary length is involved during transport which is difficult to solve by standard numerical solutions if the medium becomes more complicated.

• Journal of the Korean Mathematical Society
• /
• v.42 no.2
• /
• pp.305-334
• /
• 2005

The objective of this study is to analyze the decay characteristics of the hat interpolation wavelet coefficients of some smooth functions defined in a two-dimensional space. The motivation of this research is to establish some fundamental mathematical foundations needed in justifying the adaptive multiresolution analysis of the hat-interpolation wavelet-Galerkin method. Though the hat-interpolation wavelet-Galerkin method has been successful in some classes of problems, no complete error analysis has been given yet. As an effort towards this direction, we give estimates on the decaying ratios of the wavelet coefficients at children interpolation points to the wavelet coefficient at the parent interpolation point. We also give an estimate for the difference between non-adaptively and adaptively interpolated representations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.147-150
• /
• 2004

The reverberation characteristics of the Korean Traditional buildings aren't well-known, but there could be many particular properties. In this study, we compare the reverberation characteristics of a Korean traditional building of a temple, ‘Magoksa’, with three modern buildings. We use 5 parameters which have been widely studied in architectural acoustics such as reverberation time, early decay time, clarity, initial-time delay gap and R/D ratio.

• Mycobiology
• /
• v.42 no.3
• /
• pp.279-281
• /
• 2014

Severe bark decay disease was observed on oak logs at a shiitake cultivation farm in Geochang-gun, Gyeongnam province. The symptoms observed were fruiting bodies that had developed on the top and side surface of oak logs. As a result, the bark came off easily exposing the sapwood. Slime mold specimens collected from oak logs showed developing fruiting bodies comprising of stalks, hypothallus, capillitium, and columella, and the causal agent of bark decay disease was identified as Stemonitis splendens on the basis of morphological characteristics. To our knowledge, this is the first report of Stemonitis splendens causing bark decay of oak logs used for shiitake mushroom cultivation in Korea.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.4
• /
• pp.133-139
• /
• 2005

In this paper, the ventilation performance of suspended particulates in indoor side was investigated by step-down method. Experiments were performed in function of mechanical ventilation types and locations of supply and extract air. The type 2 ventilation system shows the highest removal characteristics rather than other 2 types. It means that the displacement ventilation has also good decay rates of concentration compared to mixing ventilation.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.467-469
• /
• 1993

To analyze dynamic characteristics for a motorcar, the creation and the hammering test methods are introduced. This paper has studied the method of computing the natural frequency of the impulse wave on a tire, the decay constant which determines the absorption capability for the impulsive force. Moreover we have examined the reliability for the decay constant calculated, in this paper theoritical results are agreed with the simulated ones.