• 한국멀티미디어학회논문지
• /
• 제14권11호
• /
• pp.1420-1430
• /
• 2011

본 논문은 IEEE 802.15.4의 MAC 계층에서 노드간 거리와 환경에 따라 적절한 전송전력 값을 설정하여 무선 모뎀의 에너지 소비를 최적화하는 방법에 대하여 제안한다. 제안된 방법은 적절한 전송전력을 결정할 때 이진검색 기법으로 빠르게 최적의 전송전력을 찾을 수 있고, 다수의 메시지 전송에 따르는 오버헤드를 최소화할 수 있다. 결정된 전송전력은 데이터 패킷을 전송할 때 사용되고, 데이터-수신확인 패킷의 교환과정에서 전파환경에 따라 변경된 네트워크 품질에 따라 동적으로 수정된다. 시뮬레이션 실험결과 본 논문에서 제안하는 방법은 IEEE 802.15.4 표준에 비해 에너지 소비량은 30% 감소하고, 단위 에너지양에 의한 데이터 전송량은 2.5배 증가하는 결과를 보였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권7호
• /
• pp.2365-2382
• /
• 2014

While single-user spatial multiplexing multiple-input multiple-output (SU-MIMO) allows spatially multiplexed data streams to be transmitted to one node at a time, multi-user spatial multiplexing MIMO (MU-MIMO) enables the simultaneous transmission to multiple nodes. However, if the transmission time required to send packets to each node varies considerably, MU-MIMO may fail to utilize the available MIMO capacity to its full potential. The transmission time typically depends upon two factors: the link quality of the selected channel and the data length (packet size). To utilize the cumulative capacity of multiple channels in MIMO applications, the assignment of channels to each node should be controlled according to the measured channel quality or the transmission queue status of the node.A MAC protocol design that can switch between MU-MIMO and multiple SU-MIMO transmissions by considering the channel quality and queue status information prior to the actual data transmission (i.e., by exchanging control packets between transmitter and receiver pairs) could address such issues in a simple but in attractive way. In this study, we propose a new MAC protocol that is capable of performing such switching and thereby improve the system performance of very high throughput WLANs. The detailed performance analysis demonstrates that greater benefits can be obtained using the proposed scheme, as compared to conventional MU-MIMO transmission schemes.

• 전자통신동향분석
• /
• 제34권6호
• /
• pp.61-70
• /
• 2019

Recently, research and development for next-generation mobile communication and short-range wireless communication has begun worldwide along with the provision of commercial services of 5G mobile communication technology. In response to this trend, the THz band has attracted considerable attention as a frequency band for transmitting 100 Gbps of large-capacity wireless data. For communication in the THz band, research and development of approaches based on photonics and electronics is being actively performed; the configurations, characteristics, and performances of these two methods for THz transmission have been seriously examined. Among them, we reviewed the technical issues in implementing THz wireless transmission technology using photonics technology. We also introduced the Electronic and Telecommunications Research Institute's (ETRI) development of photonics-based THz short-range transmission technology starting from 2019 and including some initial results. In the near future, 100 Gbps high-capacity wireless data transmission technology utilizing photonics technology is expected to be commercially available and applied to various applications, such as 3D hologram transmission, uncompressed large capacity medical data transmission, and multiple augmented reality/virtual reality (AR/VR).

• Journal of Information Display
• /
• 제9권1호
• /
• pp.6-13
• /
• 2008

Mobile phones use the embedded memory in LDI (LCD Driver IC). In memory accessing mode, data overlapping phenomenon can occur. These days, various contents such as DMB, Camera, Game are merged to phone. Accordingly, with more data transmission, there would be more data overlapping phenomenon in memory accessing mode. Human eyes perceive this data overlapping phenomenon as simply horizontal line noise. The cause of the data overlapping phenomenon was analysed in this paper. The data overlapping phenomenon can be changed by the speed of data transmission between the host and LDI. The optimum memory accessing position can be defined. This paper proposes a new algorithm for avoiding data overlapping.

• 한국멀티미디어학회논문지
• /
• 제14권9호
• /
• pp.1138-1151
• /
• 2011

센서 네트워크 클러스터링 기법은 네트워크의 수명연장에 효율적인 방법이다. 그러나 이 방법은 센서노드의 수집 데이터가 중복되기 쉬운 환경에서 적용할 경우 중복된 데이터 전송에 불필요하게 에너지가 소모된다는 문제점이 있다. 이에 본 논문은 중복되는 데이터 전송을 배제하고 클러스터 헤드 노드와 멤버노드 사이의 전송을 최소화하기 위해 센서 노드가 수집하는 데이터를 예측할 수 있는 데이터 예측 기법을 제안하였다. 이 방법은 인접노드의 중복데이터 수집을 배제하여 에너지 효율적인 데이터 전송이 가능하다. 여기에 불필요한 전송을 줄이기 위해 데이터 예측 그래프를 이용하여 수집 데이터 분석을 통한 선택적인 전송을 하는 방법을 도입하였다. 성능분석 결과에 의하면 제안하는 방법은 기존의 클러스터링 방법에 비해 노드들의 에너지 소모가 줄어들었다. 그럼에도 불구하고 전송 효율과 수집 데이터의 정확도가 증가했으며 결과적으로 네트워크 수명이 증가하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.652-657
• /
• 2004

As the real-time multimedia applications through Internet increase, the bandwidth available to TCP connections is oppressed by the UDP traffic, result in the performance of overall system is extremely deteriorated. Therefore, developing a new transmission protocol is necessary. The TCP-friendly algorithm is an example meeting this necessity. The TCP-friendly (TFRC) is an UDP-based protocol that controls the transmission rate based on the available round transmission time (RTT) and the packet loss rate (PLR). In the data transmission processing, transmission rate is determined based on the conditions of the previous transmission period. If the one-step ahead predicted values of the control factors are available, the performance will be improved significantly. This paper proposes a prediction model of transmission rate control factors that will be used for the transmission rate control, which improves the performance of the networks. The model developed through this research is predicting one-step ahead variables of RTT and PLR. A multiplayer perceptron neural network is used as the prediction model and Levenberg-Marquardt algorithm is used for the training. The values of RTT and PLR were collected using TFRC protocol in the real system. The obtained prediction model is validated using new data set and the results show that the obtained model predicts the factors accurately.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권4호
• /
• pp.748-766
• /
• 2013

In this paper, we consider an infrastructure-vehicle-vehicle (I2V2V) based Vehicle Ad-hoc Networks (VANETs), where one base station multicasts data to d vehicular users with the assistance of r vehicular users. A Distributed Luby Transform (DLT) codes based transmission scheme is proposed over lossy VANETs to reduce transmission latency. Furthermore, focusing on the degree distribution of DLT codes, a Modified Deconvolved Soliton Distribution (MDSD) is designed to further reduce the transmission latency and improve the transmission reliability. We investigate the network behavior of the transmission scheme with MDSD, called MDLT based scheme. Closed-form expressions of the transmission latency of the proposed schemes are derived. Performance simulation results show that DLT based scheme can reduce transmission latency significantly compared with traditional Automatic Repeat Request (ARQ) and Luby Transform (LT) codes based schemes. In contrast to DLT based scheme, the MDLT based scheme can further reduce transmission latency and improve FER performance substantially, when both the source-to-relay and relay-to-sink channels are erasure channels.

• 한국통신학회논문지
• /
• 제34권12B호
• /
• pp.1329-1335
• /
• 2009

본 논문에서는 무선 인체 통신 네트워크에서 응급 데이터를 전송할 때 전송 지연시간을 보장하는 DCTW(Dual Channel Transmission Scheme for WBAN)기법을 제안한다. 무선 인체 통신 네트워크에서는 의학적인 응용을 고려하고 개발되었기 때문에, 의학적 데이터의 중요도에 따른 차등 전송 기법이 필요하다. DCTW에서는 응급 데이터 프레임의 전송을 위하여 협대역 채널을 사용하며 일반 데이터 프레임 전송을 위하여 광대역 채널을 사용한다. 협대역 채널을 통하여 응급데이터를 전송하기 때문에 긴급한 데이터를 보내고자 하는 노드가 데이터를 신속히 전송할 수 있도록 하여 전송 지연시간을 효과적으로 감소시켰다. 본 논문은 다양한 성능 분석을 통해 DCTW 기법이 다른 기법에 비해 우수함을 증명하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권8호
• /
• pp.3399-3419
• /
• 2020

In the Vehicular Ad-hoc Network (VANET), the data transmission of time-sensitive applications requires low latency, such as accident warnings, driving guidance, etc. However, frequent changes of topology in VANET will result in data transmission failures. In order to improve the efficiency of VANETs data transmission and increase the timeliness of data, this paper proposes a relay scheme based on Recurrent Neural Network (RNN) trajectory prediction, which can be used to select the optimal relay vehicle to transmit data. The proposed scheme learns vehicle trajectory in a distributed manner and calculates the predicted trajectory, and then the optimal vehicle can be selected to complete the data transmission, which ensures the timeliness of the data. Finally, we carry out a set of simulations to demonstrate the performance of the algorithm. Simulation results show that the proposed scheme enhances the timeliness of the data and the accuracy of the predicted driving trajectory.

• Journal of Communications and Networks
• /
• 제18권3호
• /
• pp.493-501
• /
• 2016

In-network storage is an effective technique for avoiding network congestion and reducing power consumption in continuous data collection in wireless sensor networks. In recent years, network coding based storage design has been proposed as a means to achieving ubiquitous access that permits any query to be satisfied by a few random (nearby) storage nodes. To maintain data consistency in continuous data collection applications, the readings of a sensor over time must be sent to the same set of storage nodes. In this paper, we present an efficient approach to updating data at storage nodes to maintain data consistency at the storage nodes without decoding out the old data and re-encoding with new data. We studied a transmission strategy that identifies a set of storage nodes for each source sensor that minimizes the transmission cost and achieves ubiquitous access by transmitting sparsely using the sparse matrix theory. We demonstrate that the problem of minimizing the cost of transmission with coding is NP-hard. We present an approximation algorithm based on regarding every storage node with memory size B as B tiny nodes that can store only one packet. We analyzed the approximation ratio of the proposed approximation solution, and compared the performance of the proposed coding approach with other coding schemes presented in the literature. The simulation results confirm that significant performance improvement can be achieved with the proposed transmission strategy.