• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1641-1647
• /
• 1994

This paper describes an optimal communication protocol for high-speed networks. This scheme can support multimedia services and provide fast data transmission using the distributed gueue scheme and the dynamic bandwidth allocation architecture, based on ATM(Asynchronous Transfer Mode). Performance analyses and simulation results are presented to illustrate the effectiveness of the proposed scheme in a variety of communication environments.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.3
• /
• pp.433-439
• /
• 2018

In this paper, a SDINS(strapdown inertial navigation system) rapid initial alignment technique with adaptive time delay compensation is proposed. The proposed method consists of two steps. In first step, misalignment and data latency are estimated by conducting pre-transfer alignment. Then, hybrid alignment is designed to rapidly find the misalignment changes induced by pyro-shock. To improve the performance of hybrid alignment, adaptive time delay compensation method is suggested. We verify the performance improvement of the proposed alignment scheme comparing with the conventional transfer alignment method by van test. The test result shows that the proposed alignment technique improves alignment performance.

• Health Policy and Management
• /
• v.13 no.3
• /
• pp.91-103
• /
• 2003

The purpose of this study was to provide basic reference data for stabilization scheme of health expenditure through forecasting of health expenditure. The authors analyzed the health expenditure from 1985 to 2000 that had been calculated by Korean institute for health and social affair using transfer function model as ARIMA model with input series. They used GDP as the input series for more precise forecasting. The model of error term was identified ARIMA(2,2,0) and Portmanteau statics of residuals was not significant. Forecasting health expenditure as percent of GDP at 2010 was 6.8%, under assumption of 5% GDP increase rate. Moreover that was 7.4%, under assumption of 3% GDP increase rate and that was 6.4%, under assumption of 7% GDP increase rate.

• 한국전산유체공학회:학술대회논문집
• /
• 1997.10a
• /
• pp.106-112
• /
• 1997

The effects of radiative heat transfer are investigated in a turbulent combustion flow field with highly non-adiabatic flames. Turbulent combustion is modeled by the $k-{\varepsilon}-g$ model and a one step irreversible reaction scheme for the combustion chemistry. The radiative trasport equation is solved by the finite volume method considering the radiative transfer from $CO_2,\;H_{2}O$ and soot only. Gray gas is assumed to calculate the radiative properties of $CO_2\;and\;H_2O$. A two-equation soot formation model is applied to predict soot volume faction distribution. All equations are solved in a coupled manner and the numerical results are compared with available experimental data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.183-186
• /
• 2012

To process continuous queries on a sensor network, it is required to transfer query predicates and build a query index on each sensor node. However, if we transfer query predicates to all sensor nodes, it makes the number of messages for query predicates increase. In this paper, we propose the scheme to construct the tree based relationship structure using data region of the sensor node and select the target nodes to transfer query predicates. we also implement the tree based relationship structure and measure the number of messages for sending predicates.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.1 s.343
• /
• pp.27-36
• /
• 2006

Conventional delay-insensitive (DI) data encodings usually require 2N+1 wires for transferring N-bit. To reduce complexity and power dissipation of wires in designing a large scaled chip, an encoder and a decoder circuits, where N-bit data transfer can be peformed with only N+l wires, are proposed. These circuits are based on a quasi delay-insensitive (QDI) model and designed by using current-mode multiple valued logic (CMMVL). The effectiveness of the proposed data transfer mechanism is validated by comparisons with conventional data transfer mechanisms using dual-rail and 1-of-4 encodings through simulation at the 0.25 um CMOS technology. In general, simulation results with wire lengths of 4 mm or larger show that the CMMVL scheme significantly reduces delay-power product ($D{\ast}P$) values of the dual-rail encoding with data rate of 5 MHz or more and the 1-of-4 encoding with data rate of 18 MHz or more. In addition, simulation results using the buffer-inserted dual-rail and 1-of-4 encodings for high performance with the wire length of 10 mm and 32-bit data demonstrate that the proposed CMMVL scheme reduces the D*P values of the dual-rail encoding with data rate of 4 MHz or more and 1-of-4 encoding with data rate of 25 MHz or more by up to $57.7\%\;and\;17.9\%,$ respectively.

• Journal of Broadcast Engineering
• /
• v.19 no.2
• /
• pp.184-194
• /
• 2014

The CBS methodology has been utilized in order to make a rapid broadcast of emergency alert based on cellular systems. We present a synchronous cooperative communication method for the CBS. Especially, we suggest a synchronization scheme and a data recovery approach for high-rate cooperative communications. For the high-rate transfer of emergency alert, the cyclic prefix is added to the preamble for the synchronization. For the data recovery, the Alamouti technique is utilized on frequency domain, which is similar to SC-FDE. The simulation results confirm that our proposed scheme is very suitable for the CBS.

• Smart Media Journal
• /
• v.3 no.1
• /
• pp.28-32
• /
• 2014

It is practical nowadays to automate data recording in order to prevent loss and tampering of records. There are existing technologies that satisfy this needs and one of them is wireless sensor networks (WSN). Wireless body sensor networks (WBSN) are wireless networks and information-processing systems which are deployed to monitor medical condition of patients. In terms of performance, WBSNs are restricted by energy, and communication between nodes. In this paper, we focused in improving the performance of communication to achieve less energy consumption and to save power. The main idea of this paper is to prioritize nodes that exhibit a sudden change of vital signs that could put the patient at risk. Cluster head is the main focus of this study in order to be effective; its main role is to check the sent data of the patient that exceeds threshold then transfer to the sink node. The proposed scheme implemented added a time-based protocol to sleep/wakeup mechanism for the sensor nodes. We seek to achieve a low energy consumption and significant throughput in this study.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.123-127
• /
• 2005

The numerical analyses of the complicated flows are widely attempted in these days. Because of the enormous demanding memory and calculation time, parallel processing is used for these problems. In order to obtain calculation efficiency, it is important to choose proper domain decomposition technique and numerical algorithm. In this research we enhanced the efficiency of the CFDS code developed by ADD, using parallel computation and newly developed numerical algorithms. For the huge amount of data transfer between blocks non-blocking method is used, and newly developed data transfer algorithm is used for non-aligned block interface. Recently developed RoeM scheme is adpoted as a spatial difference method, and AF-ADI and LU-SGS methods are used as a time integration method to enhance the convergence of the code. Analyses of the flows around the ONERA M6 wing and the high angle of attack missile configuration are performed to show the efficiency improvement.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.350-353
• /
• 2011

전 세계적으로 기후변화로 인한 자연재해가 빈번하게 발생함에 따라 수자원 분야에서 또한 환경의 변화에 대한 정확한 예측이 더욱 요구되고 있다. 국내에서도 이를 위하여 다양한 방법을 통하여 연구가 이루어지고 있으나 본 연구에서 사용된 Common Land Model (CLM)은 국내에서의 실질적인 적용이 아직 부족하다. 이 모형은 Soil-Vegetation-Atmosphere Transfer 모형 중 대표적 모델로 Land Surface Model (LSM), Biosphere-Atmosphere Transfer Scheme (BATS), Chinese Academy of Sciences Institute of Atmospheric Physics LSM의 세 모형이 결합되어 발전하였다. CLM의 강제입력자료로는 위성, 지면모형 등을 기반으로 만들어진 자료를 제공하는 Korea Land Data Assimilation Systme (KLDAS; 한반도지표자료동화체계)의 격자화 된 자료를 사용하여 모형에 강제시켰다. KLDAS는 기존의 Land Data Assimilation System (LDAS)에서 발전한 형태로 동아시아 지역을 대상으로 자료를 제공하고 있으며, 본 연구에서는 이 자료를 사용하여 국내 전반에 걸쳐 격자에 대한 수문 기상학적 인자를 산출하였다.