• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.12
• /
• pp.1681-1690
• /
• 2003

The effect of roughness is a change in the velocity and turbulence distributions near the surface. Turbulence models with surface roughness effect are applied to the fully developed flow in a two-dimensional, rough wall channel. Modified wall function model, low-Reynolds number k-$\varepsilon$ model, and k-$\omega$ model are selected for comparison. In order to make a fair comparison, the calculation results are compared with the experimental data. The modified wall function model and the low-Reynolds number k-$\varepsilon$ model require further refinement, while the k-$\omega$ model of Wilcox performs remarkably well over a wide range of roughness values.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.1
• /
• pp.48-53
• /
• 2001

The crystal structure of ZnS fabricated by gas-liquid phase reaction was refined by the Rietveld program using X-ray diffraction data. The R-weighted pattern (R$\sub$wp/) of ZnS powder was 10.85%. The fraction of HCP phase was closely related with extra amount of H$_2$S gas. The lattice parameters and crystalline size were changed by the relative ratio of multi-phase. The luminescence property of ZnS:Cu, Al green phosphors prepared by conventional methods was good in the range of 91∼94% and 150∼190${\AA}$, respectively. According to the maximum entropy electron density(MEED) methods, any defects in (001) plane of cubic phase were not found. We suggest that both the Rietveld and maximum entropy density methods may be useful tools for studying luminescence mechanism of other phosphors materials.

• Journal of The Korean Association of Information Education
• /
• v.8 no.4
• /
• pp.555-562
• /
• 2004

There are informal, semi-formal and formal methods in software specification. Among them, formal method which is based on mathematical theory had been used to remove ambiguity, incompleteness and contradiction efficiently. In this paper, we propose implementation steps from Z specification to EJB source code, Also, as a case study we show steps consisted of specifying stack data structure and implementing it in EJB. In conclusion, Z specification proved to be capable of implementing EJB interface, exception class, method, through refinement and definition of schema, interface, post-condition, pre-condition.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.4
• /
• pp.172-177
• /
• 2012

Mo-doped $LiFePO_4$ was synthesized via co-precipitation method using sucrose as the carbon source. Structure, surface morphology, and the electrochemical properties of the synthesized olivine compounds were investigated using Rietveld refinement of X-ray diffraction data (XRD), scanning electron microscopy (SEM), and electrochemical charge-ischarge tests. Spherical morphology with the particle size of ${\sim}8{\mu}m$ authenticated the enhanced tap density and volumetric energy density of the synthesized materials. Charge-discharge behavior of $LiFePO_4$ and Mo-doped $LiFePO_4$ cells demonstrated a specific capacity of 130 and 145 mAh $g^{-1}$, respectively. Mo-doped $LiFePO_4$ cells exhibited an excellent discharge capacity at 96 mAh $g^{-1}$ at 7 C-rate.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.6
• /
• pp.469-477
• /
• 2008

Physically-based rendering is an image synthesis technique based on simulation of physical interactions between light and surface materials. Since generated images are highly photorealistic, physically-based rendering has become an indispensable tool in advanced design visualization for manufacturing and architecture as well as in film VFX and animations. Especially, BRDF (bidirectional reflectance distribution function) is critical in realistic visualization of materials since it models how an incoming light is reflected on the surface in terms of intensity and outgoing angles. In this paper, we introduce techniques to represent BRDF as B-spline volumes and to utilize them in physically-based rendering. We show that B-spline volume BRDF (BVB) representation is suitable for measured BRDFs due to its compact size without quality loss in rendering. Moreover, various CAGD techniques can be applied to B-spline volume BRDFs for further controls such as refinement and blending.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.161-170
• /
• 2007

As one of the major handling performances of the vehicle and tire, the steering feel is very important in the high speed where safety and refinement is a major concern for the drivers. This paper presents both subjective and objective techniques for the assessment of the steering feel including the on-center feel and steering response. For this, subjective evaluation method of the steering feel was studied at first and then objective parameters were selected by considering the process by which the steering feel is evaluated subjectively. From statistical analysis of subjective and objective data for the several vehicles and professional drivers, it was found that the subjective assessment of the steering feel could be successfully explained by means of the suggested objective parameters. Also, the main objective parameters related to the subjective assessment of the steering feel could be found.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.04a
• /
• pp.19-26
• /
• 1993

The p-version crack model based on integrals of Legendre polynomial and virtual crack extension method is proposed with its potential for application to stress intensity factor computations in linear elastic fracture mechanics. The main advantage of this model is that the data preparation effort is minimal because only a small number of elements are used and the high accuracy and the rapid rate of convergence can be achieved in the vicinity of crack tip. There are two important findings from this study. Firstly, the limit value, the strain energy of the exact solution can be estimated with successive three p-version approximations by ascertaining the approximations is entered the asymptotic range. Secondly, the rate of convergence of p-version model is almost twice that of h-version model on the basis of uniform or quasiuniform mesh refinement for the cracked panel problem subjected tension.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.1
• /
• pp.61-67
• /
• 2014

This paper proposes a procedure enabling the extraction of view-dependent triangular approximations from a height map. In general, procedures to approximate a height map use tree hierarchies. These methods, however, have a limitation in terms of accuracy, because they depend on tree hierarchy than terrain features. To overcome the difficult, we apply the simplification method for triangular meshes to a height map. The proposed procedure maintains full decimation procedure to support multiresolution. The maintenance of decimation procedure results in creation of the groups (trees), each of which consists of vertices that can be merged into one vertex (root node). As the groups have tolerance which is determined by some tests, they support the generation of view-dependent arbitrary triangular meshes.

• Journal of the Korean Home Economics Association
• /
• v.24 no.4
• /
• pp.139-146
• /
• 1986

The purpose of this study was to identify aesthetic concepts of‘Sarangbang’furniture during the Yi-dynasty period and aesthetic descriptions indicating each concept expressed by experts in traditional furniture. The furniture selected for the study includes desks, table bookcases, document and stationary boxes (mungab), letter holders (Kobi) and inkstone boxes (younsang) with lacquer and oil finish on. The respondents were 72 traditional furniture experts; researchers collectors, sellers and artists related to period furniture. The important points of aesthetic descriptors were collected 123 from related literature. From experts' answers, 47 representative descriptors were selected. Data were analyzed with the SPSS using frequency, Percentage mean, factor analysis, t-test and C2. The results were as follows; 1. The aesthetic concept of sarangbang furniture during the Yi-dynasty can be categorized into 9 aspects; appearance of beauty, stability the interior space, naturalness, nobleness/harmony of lines, detail/refinement, simplicity, diversity solidity and surface division. 2. The characteristics of the Korean traditional furniture can be described using 47 descriptors explaining 9 concepts mentioned above.

• Journal of the Korean Institute of Rural Architecture
• /
• v.8 no.2
• /
• pp.27-35
• /
• 2006

The park in city, is more than just ecological function, contributes emotional refinement and psychological stability to citizens, and give satisfaction of social and recreational activities to the citizens. And it is the place of leisure and the place to raise up the quality of urban environment. Especially, the neighborhood park among urban parks occupies the most important position as a leisure space for local resident, but it can not perform its purpose and function as a leisure space, due to its too formal and insufficient facilities. This study, approaching from point of physical method, intends to make types through classifying each parks by built-type and installed facilities which affect human-beings, approaching from point of human-beings, intends to make the using-type analysis of park-users, and the questionnaire.By grasping of their requirements regarding to the characters and facilities what they want, willing to present the fundamental data for effective utility-activating method of small-scaled neighborhood park.