• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.440-449
• /
• 2008

In this paper, we propose a 16-QAM carrier recovery loop which is suitable for the implementation of Inmarsat M4 system receiver. Because the frequency offset of ${\pm}924\;Hz$ on signal bandwidth 33.6 kHz is recommended in Inmarsat M4 system specification, carrier recovery loop having stable operation in the channel environment with large relative frequency offset is required. the carrier recovery loop which adopts only PLL can't be stable in relatively large frequency offset environment. Therefore, we propose a carrier recovery loop which has stable operation in large relative frequency offset environment for Inmarsat M4 system. The proposed carrier recovery loop employed differential filter-based noncoherent UW detector which is robust to frequency offset, CP-AFC for initial frequency offset acquisition using UW signal, and 16-QAM DD-PLL for phase tracking using data signal to overcome large relative frequency offset and achieve stable carrier recovery performance. Simulation results show that the proposed carrier recovery loop has stable operation and satisfactory performance in large relative frequency offset environment for Inmarsat M4 system.

• Culinary science and hospitality research
• /
• v.22 no.8
• /
• pp.204-218
• /
• 2016

The purpose of this study is to identify the differences in the effect of service recovery efforts on consumers satisfaction, word of mouth intentions, and revisit intentions when exposed to service failure situations. The service failure situation was classified into outcome-related and process-related failures. The service recovery effort was divided into financial and emotional efforts. Using a scenario technique, this study collected data from diners in Daegu and Gyoungbuk province. The results of the empirical analysis show that the effect of service recovery efforts varies depending on types of service failures and recovery efforts. Also, the interaction between service failure types and service recovery efforts was confirmed.

• Journal of Industrial Technology
• /
• v.15
• /
• pp.51-62
• /
• 1995

Databases can crash due to various failures in computer systems. Recovery is a mechanism for restoring consistent data from damages caused by the by the failures and is an essential feature in database systems. This paper surveys recovery techniques for memory resident database systems. We first describe the basic architecture for memory resident database systems, and point out the main factors affecting their performance enhancement. Next, we explain the write-ahead logging(WAL), a recovery technique widely-used in most disk resident database systems, for easy understanding of basic recovery mechanisms. And then, we discuss some new concepts employed in memory resident database systems recovery. Finally, we present a representative memory resident database recovery technique, which is based on a special purpose hardware called HALO, as a case study.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.333-339
• /
• 2000

This study was performed to investigate the performance of heat recovery device attached to exhaust gas funnel connected to combustion chamber of greenhouse heating system. The experiment heat recovery system is mainly consisted of LPG combustion chamber and two heat recovery units; unit-A is attached directly to the exhaust gas funnel, and unit-B is connected with unit-A. Heat recovery performance was evaluated by estimating total energy amount by using enthalpy difference between two measurement points together with mass flow rate of gas and/or air passing through each heat recovery unit depending on 5 different flow rates controlled by voltage meter. The results of this experimental study, such as heat exchange behavior of supply air pipes and exhaust air passages crossing the pipes, pressure drop between inlet and outlet, heat recovery performance of exchange unit, etc., will be used as fundamental data for designing optimum heat recovery device to be used for fuel saving purpose by reducing heat loss amounts mostly wasted outside of greenhouse through funnels.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.487-489
• /
• 2005

This paper proposes a symbol timing recovery method that is simple in structure and can provide high speed symbol synchronization. Transmitter and receiver are not synchronized in communication systems using digital modulation. Receiver should search the timing variation of transmitter continuously. The proposed timing recovery method searches sample position by comparing previous sample value with next sample value. This method can be applied to digital and optical transceivers with high data rate.

• ETRI Journal
• /
• v.34 no.1
• /
• pp.35-43
• /
• 2012

This paper presents a delay-locked-loop-based clock and data recovery (CDR) circuit design with a nB(n+2)B data formatting scheme for a high-speed serial display interface. The nB(n+2)B data is formatted by inserting a '01' clock information pattern in every piece of N-bit data. The proposed CDR recovers clock and data in 1:10 demultiplexed form without an external reference clock. To validate the feasibility of the scheme, a 1.7-Gbps CDR based on the proposed scheme is designed, simulated, and fabricated. Input data patterns were formatted as 10B12B for a high-performance display interface. The proposed CDR consumes approximately 8 mA under a 3.3-V power supply using a 0.35-${\mu}m$ CMOS process and the measured peak-to-peak jitter of the recovered clock is 44 ps.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.4
• /
• pp.239-246
• /
• 2017

Time synchronization between distributed embedded systems in the Real Time Locating System (RTLS) based on Time Difference of Arrival (TDOA) is one of the most important factors to consider in system design. Clock jitter error between each system causes many difficulties in maintaining such a time synchronization. In this paper, we implemented a system to synchronize clocks between FPGA based distributed embedded systems using the recovery clock of CDR (clock data recovery) used in high speed serial communication to solve the clock jitter error problem. It is experimentally confirmed that the cumulative time error that occurs when the synchronization is not performed through the synchronization logic using the CDR recovery clock can be completely eliminated.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.12
• /
• pp.1644-1651
• /
• 1995

A data and clock recovery integrated circuit for MAC (Multiplexed Analog Component) TV standard is described. The chip performs the recovery of a system clock from a digitally encoded voice signal, clamping of a video signal for DC-level restoration, and precise gain control of a video signal in the presence of a large amplitude variation. A PLL (Phase Locked Loop) is used for timing recovery and a new gain control circuit is proposed which enhances its accuracy and dynamic range by employing two identical four-quadrant analog multipliers. The chip is designed in full custom with 1.5um BiCMOS technology, and layout verification is completed by post-simulation with the extracted circuit.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.1 s.20
• /
• pp.32-38
• /
• 2005

In this study, Experimental analysis on submarine cable tension was performed for the safe and efficient laying and recovery of a submarine cable. The tension analysis was done through the analyzed data using the cable dynamic theory and the measured data using the experiment. The analyzed cable tension was able to decide requirements for the purpose of laying and recovery of the submarine cable. As the result of tension analysis for a Submarine cable, it was shown a proper feasibility to determine the laying and recovery conditions of the submarine cable.

• Korean Journal of Remote Sensing
• /
• v.20 no.1
• /
• pp.13-21
• /
• 2004

The usefulness of the multi-temporal satellite image to monitoring the vegetation recovery process after forest fire was tested. Using multi-temporal Landsat TM and ETM＋data, NDVI and NBR changes over times were analyzed. Both NDVI and NBR values were rapidly decreased after the fire and gradually increased for all forest type and damage class. However, NBR curve showed much clearer tendency of vegetation recovery than NDVI. Both indices yielded the lowest values in severely damaged red pine forest. The results show the vegetation recovery process after forest fire can detect and monitor using multi-temporal Landsat image. NBR was proved to be useful to examine the recovering and development process of the vegetation after fire. In the not damaged forest, however the NDVI shows more potential capability to discriminate the forest types than NBR..