• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1638-1643
• /
• 2019

In this paper, we propose an adaptive-perturbation-aided opportunistic precoding (APOP) scheme for multiple-input multiple-output (MIMO) systems. To update a precoding matrix in MIMO systems, the proposed algorithm produces a random perturbation in each time slot. Then the additional adaptive perturbation is also applied, which depends on the reports of achievable data-rates from users. If the prior random perturbation increased the data rate, the adaptive perturbation is set to be the same as the prior random perturbation, otherwise the negative value of the prior random perturbation is applied for adaptive perturbation. Furthermore, to enhance the achievable data rates, the information on the stored precoding matrices in the memory as well as the currently generated precoding matrix is used for scheduling. Simulation results show that compared to conventional opportunistic precoding schemes, higher data rates are achieved by the proposed APOP scheme, especially when there are a relatively small number of users.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.159-164
• /
• 2004

In electrical impedance tomography (EIT), various image reconstruction algorithms have been used in order to compute the internal resistivity distribution of the unknown object with its electric potential data at the boundary. Mathematically the EIT image reconstruction algorithm is a nonlinear ill-posed inverse problem. This paper presents a simultaneous perturbation method as an image reconstruction algorithm for the solution of the static EIT inverse problem. Computer simulations with the 32 channels synthetic data show that the spatial resolution of reconstructed images by the proposed scheme is improved as compared to that of the mNR algorithm at the expense of increased computational burden.

• Journal of the Korean Society of Safety
• /
• v.20 no.2 s.70
• /
• pp.119-126
• /
• 2005

Load bearing structural members in a wide variety of applications accumulate damage over their service life. From a standpoint of both safety and performance, it is desirable to monitor the occurrence, location, and extent of such damage. Structures require complicated element models with a number of degrees of freedom in structural analysis. During experiment much effort and cost is needed for measuring structural parameters. The sparseness and errors of measured data have to be considered during the parameter estimation Of Structures. In this paper we introduces damage identification algorithm by a system identification(S.I) using static and dynamic response. To study the behaviour of the estimators in noisy environment Using Monte Carlo simulation and a data measured perturbation scheme is adopted to investigate the influence of measurement errors on identification results. The assessment result by static and dynamic response were compared, and the efficiency and applicabilities of the proposed algorithm are demonstrated through simulated static and dynamic responses of a truss bridge. The assessment results by each method were compared and we could observe that the 5.1 method is superior to the other conventional methods.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.04a
• /
• pp.300-307
• /
• 1999

신경망기법을 이용한 구조물접합부의 손상평가기법을 제안하였다. 신경망기법의 성능을 개선하기 위하여 노이즈첨가학습을 수행하였으며 효과적인 손상평가를 위하여 부분구조추정법 및 data perturbation scheme을 도입하였다. 10층 프레임구조물에 대한 수치해석과 2층 프레임구조물에 대한 실험연구를 통하여 제안기법을 검증하였다 계측지점이 부분구조로 제한되고 계측자료가 노이즈를 포함하는 경우에는 제안기법이 효과적으로 적용될수 있음을 알 수 있었으며 실험을 통하여 실제 구조물에 대한 제안기법의 적용성을 평가힐 수 있었다.

• Journal of Communications and Networks
• /
• v.4 no.3
• /
• pp.189-198
• /
• 2002

Precoder has been shown to be able to provide source diversity and design flexibility. In this paper we employ precoding techniques for block transmission based on a multirate filterbank structure. To accommodate multiuser communication with variable data rates, different precoders with corresponding coefficients and up/down sampling rates are used. However, due to unknown multipath distortion, different interferences may exist in the received data, such as multiuser interference, intersymbol interference and interblock interference. To estimate channel parameters for a desired user, we employ all structured signature waveforms associated with different symbols of that user and apply subspace techniques. Therefore better performance of channel estimator can be achieved than the conventional subspace method based only on the signature of the current symbol. The delay for that user can also be jointly estimated. Channel identifiability conditions and asymptotic channel estimation error are investigated in detail. Numerical examples are provided to justify the proposed method. gest either multicode (MC) or multiple processing gain (MPG) mechanism [2], while requiring data rates to be integral multiples of some basic low-rate. In order to support variable rate transmission however, a comprehensive scheme needs to be investigated.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.71-78
• /
• 1998

Inversion schemes of 2-D MT survey data generally take enormous computational time and computer memory. In addition, careful attention must be paid in handling MT data, especially in cases of TM mode, inversion results can be seriously distorted because of static effect caused by current channeling across inhomogeneous surface boundaries. There-fore inversion algorithm using the GRRI scheme for TM mode MT data was implemented. This scheme is based on a perturbation analysis with a locally 2-D analysis and local inversions were sequently performed over each divided section without additional forward modelings. The algorithm was applied to several synthetic data for the purpose of verification of its efficiency and applicability. With less computer resources than conventional schemes, it could handle static effect directly by including current channeling across inhomogeneous boundaries. Thus it is expected to be used for an useful tool such as a real-time inversion scheme in the field.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.3
• /
• pp.9-20
• /
• 1999

A method is proposed to estimate the joint damages of a steel structure from modal data using the neural networks technique. The beam-to-column connection in a steel frame structure is represented by a zero-length rotational spring of the end of the beam element, and the connection fixity factor is defined based on the rotational stiffness so that the factor may be in the range 0~1.0. Then, the severity of joint damage is defined as the reduction ratio of the connection fixity factor. Several advanced techniques are employed to develop the robust damage identification technique using neural networks. The concept of the substructural indentification is used for the localized damage assessment in the large structure. The noise-injection learning algorithm is used to reduce the effects of the noise in the modal data. The data perturbation scheme is also employed to assess the confidence in the estimated damages based on a few sets of actual measurement data. The feasibility of the proposed method is examined through a numerical simulation study on a 2-bay 10-story structure and an experimental study on a 2-story structure. It has been found that the joint damages can be reasonably estimated even for the case where the measured modal vectors are limited to a localized substructure and the data are severely corrupted with noise.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.3
• /
• pp.338-346
• /
• 2006

In this paper, the test results of medium-size(120 kW class) PV system which was installed in the Taeahn thermal power station of Korea Western Power Co., Ltd., were summarized for developing the practical technology to applicate high voltage grid connection PV system. The 120 kW photovoltaic system which was consisted of 1,300 modules, PCS, and 150 kVA transformer station has been operated since Aug. 05, 2005. For verifying the modeling results of PV system, the operation data was compared with modeling results which was executed commercial PSCAD/EMTD and Psim tools. An equivalent circuit model of a solar cell has been also used for solar array modeling. A series of parameters required for array modeling have been estimated from general specification data of a solar module. A PWM voltage source inverter(VIS) and its current control scheme have been analyzed by using P&O (perturbation and Observation) MPPT algorithms technique.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1804-1812
• /
• 2022

The aim of this paper is to assess the reliability and accuracy of the PSI standard method, used in many previous works, for the quantification of ND uncertainties in the SPERT-III RIA transient, by quantifying the discrepancy between the actual inserted reactivity and the original static reactivity worth and their associated uncertainties. The assessment has shown that the inherent S3K neutron source renormalization scheme, introduced before starting the transient, alters the original static reactivity worth of the transient CR and reduces the associated uncertainty due to the ND perturbation. In order to overcome these limitations, two additional methods have been developed based on CR adjustment. The comparative study performed between the three methods has showed clearly the high sensitivity of the obtained results to the selected approach and pointed out the importance of using the right procedure in order to simulate correctly the effect of ND uncertainties on the overall parameters in a RIA transient. This study has proven that the approach that allows matching the original static reactivity worth and starting the transient from criticality is the most reliable method since it conservatively preserves the effect of the ND uncertainties on the inserted reactivity during a RIA transient.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.4
• /
• pp.395-404
• /
• 2000

A damage detection and assessment algorithm is developed by measuring accelerations at limited locations of a structure under forced vibrations. The developed algorithm applies a time-domain system identification (SI) method that identifies a structure by solving a linearly constrained nonlinear optimization problem for optimal structural parameters. An equation error of the dynamic equilibrium of motion is minimized to estimate optimal parameters. An adaptive parameter grouping scheme is applied to localize damaged members with sparse measured accelerations. Damage is assessed in a statistical manner by applying a time-windowing technique to the measured time history of acceleration. Displacements and velocities at the measured degrees of freedom (DOF) are computed by integrating the measured accelerations. The displacements at the unmeasured DOF are estimated as additional unknowns to the unknown structural parameters, and the corresponding velocities and accelerations we computed by a numerical differentiation. A numerical simulation study with a truss structure is carried out to examine the efficiency of the algorithm. A data perturbation scheme is applied to determine the thresholds lot damage indices and to compute the damage possibility of each member.