• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.30-45
• /
• 2014

Recently, multimedia application users who demand for ubiquitous computing environment are rapidly increasing, and wireless mesh network is receiving attention as a cost-effective key technology for next generation wireless networking. When multiple flows are transmitting data at the same time in the network, routing for path selection of each flow and link resource allocation for data transmission of each flow are one of the key factors that influence to the effectiveness of the network directly. In this paper, we consider problems for path discovery and resource allocation of links at the same time and we propose an algorithm based on mathematical modeling using a technique for cross-layer optimization design in STDMA-based wireless mesh networks that can enhance transfer performance for each flow. We show by performance analysis that the proposed algorithm can enhance the throughput performance by maximally utilizing given bandwidth resources when the number of flows increase in multi-hop wireless mesh networks.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.1
• /
• pp.65-72
• /
• 2015

AMI / HDB-3 method used a scrambling technique is used primarily for long distance data transmission line encoding. In this paper, information communication code standard (KS X 1001; 2014 confirmation), as defined in Hangul Character Code HDLC Flag bit or character stuffing at the data link layer and physical layer with respect to the code set for Hangul AMI / HDB-3 the code set for the new system to increase the data transmission efficiency Hangul consonant and vowel tables presented in terms of scrambling. The result of the existing system and the code set ($4{\times}4$) bit source coding rules for comparing the frequency of use Hangul consonant and vowel tables and statistics showed that about 22.01% of the data processing efficiency is improved.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.2
• /
• pp.39-47
• /
• 2010

In Wireless Sensor Network, transmission errors are frequently occurred due to the node failure, battery discharge, and interference by objects. Although Directed Diffusion has been considered as a prominent Data-centric routing algorithm, it revealed some weaknesses at this kind of unexpected network errors. In order to address the problem, we proposed a radio-aware routing algorithm for improving reliability of Directed Diffusion in Wireless Sensor Networks. The proposed algorithm is aware of the network status based on the radio information of MAC and PHY layers using a cross-layer approach. The link quality and the node failure information from the acquired network status were used to decide an alternative path to provide a reliable data transmission in error-prone sensor networks. The proposed algorithm showed its effectiveness of the data delivery rate and data ratio with several simulations consisting of various error rates and the number of nodes.

• The Journal of Society for e-Business Studies
• /
• v.4 no.1
• /
• pp.87-101
• /
• 1999

To operate the automatic devices of manufacturing process more effectively and to solve the needs of the resource sharing, network technology is applied to the control devices located in common manufacturing zone and operated by connecting them. In this paper, functional standard of the network layers are set as physical and data link layer of IEEE 802.2, 802.4, and VMD application layer and ISO-CIM reference model. Then, they are divided as minimized architecture, designed as group objects which perform group management and service objects which organizes and operates the group. For the stability in this network, this paper measures the variation of data packet length and node number and analyzes the variated value of the waiting time for the network operation. For the method of the analysis, non-exhausted service method are selected, and the arrival rates of the each data packet to the nodes that are assumed to form a Poission distribution. Then, queue model is set as M/G/1, and the analysis equation for waiting time is found. For the evalution of the performance, the length of the data packet varies from 10 bytes to 100 bytes in the operation of the group management network, the variation of the wating time is less than 10 msec. Since the waiting time in this case is less than 10 msec, response time is fast enough. Furthermore, to evaluate the real time processing of the group management network, it shows if the number of nodes is less than 40, and the average arrival time is less than 40 packet/sec, it can perform stable operation even taking the overhead such as software delay time, indicated packet service, and transmissin safety margin.

• Journal of information and communication convergence engineering
• /
• v.12 no.3
• /
• pp.154-160
• /
• 2014

The address resolution protocol (ARP) provides dynamic mapping between two different forms of addresses: the 32-bit Internet protocol (IP) address of the network layer and the 48-bit medium access control (MAC) address of the data link layer. A host computer finds the MAC address of the default gateway or the other hosts on the same subnet by using ARP and can then send IP packets. However, ARP can be used for network attacks, which are one of the most prevalent types of network attacks today. In this study, a new ARP algorithm that can prevent IP spoofing attacks is proposed. The proposed ARP algorithm is a broadcast ARP reply and an ARP notification. The broadcast ARP reply was used for checking whether the ARP information was forged. The broadcast ARP notification was used for preventing a normal host's ARP table from being poisoned. The proposed algorithm is backward compatible with the current ARP protocol and dynamically prevents any ARP spoofing attacks. In this study, the proposed ARP algorithm was implemented on the Linux operating system; here, we present the test results with respect to the prevention of ARP spoofing attacks.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.10
• /
• pp.903-910
• /
• 2000

In this paper, we describe a slave chip based on the Profibus-DP protocol and a system board to verify the developed slave chip. The Profibus-DP protocol is designed using VHDL and implemented on FPGA. The system board adopting the developed FPGA is designed FPGA is designed in which the firmware is implemented on Intel 8051 by using C language. Among the Profibus-DP protocols, low level layers from the physical layer to the data link layer is implemented in the form of hardware that we are able to greatly reduce the CPU load in processing protocols, and then higher layers could be processed by software. These technologies result in an IP to make terminal devices in the distributed control systems. Therefore, many digital logics as well as communication logics can be implemented onto SOC(System On a Chip) and it could be applied to various fieldbus-related areas.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.1
• /
• pp.113-122
• /
• 1998

This paper presents an implementation method of Profibus interface software using FMS(Fieldbus Message Specification). The Profibus interface software is implemented on PC which is widely used as an industrial computer as well as a commercial embedded controller called IUC(Intelligent Universal Controller). In order to enable the Profibus interface software to handle many application tasks and communication services, two kinds of real-time/multi-tasking operating system, OS-9 and CTask, are utilized. We also develop an experimental model of Profibus-based automation system, and evaluate the performance of the Profibus network. Through experiments, the user layer level message latency is measured with respect to the change of message length, message generation interval and TRT(Target Rotation Time). The results of experiment are compared with those of a simulation model which comprises only the physical and data link layers of Profibus. The results of this study shows that the message latency in the user layer level occupies fairly a large part of the total message latency.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.56-63
• /
• 2012

The WBAN technology means a short distance wireless network which provides each device interactive communication by connecting devices inside and outside of body. Standardization on the physical layer, data link layer, network layer and application layer is in progress by IEEE 802.15.6 TG BAN. Wireless body area network is usually configured in energy efficient using sensor and zigbee device due to the power limitation and the characteristics of human body. Wireless sensor network consist of sensor field and sink node. Sensor field are composed a lot of sensor node and sink node collect sensing data. Wireless sensor network has capacity of the self constitution by protocol where placed in large area without fixed position. Mobile sink node distribute energy consumption therefore network life time was increased than fixed sink node. The energy efficient is important matter in wireless body area network because energy resource was limited on sensor node. In this paper we proposed cluster topology algorithm for efficient data transmission in wireless body area network based mobile sink. The proposed algorithm show good performance under the advantage of grid routing protocol and TDMA scheduling that minimized overlap area on cluster and reduced amount of data on cluster header in error prone wireless sensor network based on mobile sink.

• Journal of KIISE:Information Networking
• /
• v.30 no.6
• /
• pp.755-763
• /
• 2003

To improve performance over noisy wireless channels, mobile wireless networks employ forward error correction(FEC) techniques. The performance of static FEC algorithms, however, degrades by poorly matching the overhead of their correction code to the degree of the fluctuating underlying channel error. This paper proposes an adaptive FEC technique called FECA(FEC-level Adaptation), which dynamically tunes FEC strength to the currently estimated channel error rate at the data link layer. FECA is suitable for wireless networks whose error rate is high and slowly changing compared to the round-trip time between two communicating nodes. One such example network would be a sensor network in which the average bit error rate is higher than $10^{-6}$ and the detected error rate at one time lasts a few hundred milliseconds on average. Our experiments show that FECA performs 15% in simulations with theoretically modeled wireless channels and in trace-driven simulations based on the data collected from real sensor networks better than any other static FEC algorithms.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.9
• /
• pp.9-17
• /
• 1993

There are multiple controllers (PLC. LOOP Controller ) which are operating in product line and fabrication line. In those lines, it is necessary to connect various multilple controllers with integrity and coordination. The ways to connect those devices are specified by ISO network standard. In this paper, real time network is designed and implemented for factory automation at lowest possible cost that meets the small and middle size MINI-MAP specifications. Network performance is evaluated by simulation method on data link layer implemented interfacing modules has efficiency in throughput by reducing processing time. The system designed in this paper can be also applied to the field of distributed systems for real time processing.