• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.114-118
• /
• 2021

In this research, the dimensional error of the measured specimen according to the measurement method was analyzed for the length, angle, radius of curvature and diameter using a projector which is used in industry. One-way analysis was performed on each data tested 30 times using a statistical technique. Through the experiment, it was found that an error occurred in each data when measuring the length and radius of curvature according to the measurement method, and the null hypothesis that no error occurred when measuring the angle and length was established. Based on this experimental data, the automatic measurement when measuring the projector causes less measurement error, so automatic measurement is recommended when measuring a small product. Also, an optimal measuring method is suggested for securing reliability on formulations of measurement automation.

• Journal of Advanced Navigation Technology
• /
• v.8 no.1
• /
• pp.1-9
• /
• 2004

In this paper, we have studied the reliable scheme for transmission of digital watermarking-inserted image data through wireless channel. Multimedia data and watermarking data are degraded because of the high BER (Bit Error Rate) and the effect of fading in wireless channel. We adapt the error correction scheme for mitigating the degradation in watermarking data. We have evaluated the error performance of watermarking data modulated by OFDM/16QAM and sent through Rician fading channel. The simulation results show that when error correcting scheme is used the watermarking data can be detected without severe error even though watermarking-inserted image data is suffered from severe damage.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.2
• /
• pp.143-151
• /
• 2016

The distribution of seabed rock in the coastal area is relevant to navigation safety and development of ocean resources where it is an essential hydrographic measurement. Currently, the distribution of seabed rock relies on interpretations of water depth data or point based bottom materials survey methods, which have low efficiency. This study uses the airborne bathymetric Lidar data and the hyperspectral image to detect seabed rock in the coastal area of the East Sea. Airborne bathymetric Lidar data detected seabed rocks with texture information that provided 88% accuracy and 24% commission error. Using the airborne hyperspectral image, a classification result of rock and sand gave 79% accuracy, 11% commission error and 7% omission error. The texture data and hyperspectral image were fused to overcome the limitations of individual data. The classification result using fused data showed an improved result with 96% accuracy, 6% commission error and 1% omission error.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.3
• /
• pp.613-621
• /
• 2016

Since the error control problem is a critical and sensitive issue in the one-way network, we can adopt a forward error correction code method or data retransmission method based on the response of reception result. In this paper, we propose error control method and continuous data transmission protocol in the one-way network which has unidirectional data transmission channel and special channel to receive only the response of reception result. Furthermore we present data encryption and key update mechanism which is based on the pre-shared key distribution scheme and suggest some ASDU(Application Service Data Unit) formats to implement it in the one-way network.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.135-141
• /
• 2000

The major role of temperature sensors in thermal error compensation system of machine tools is improving machining accuracy by supplying reliable temperature data on the machine structure. This paper presents a new method for fault diagnosis of temperature sensors and recovery of faulted data to establish the reliability of thermal error compensation system. The detection of fault and its location is based on the correlation coefficients among temperature data from the sensors. The multiple linear regression model which is prepared using complete normal data is also used fur the recovery of faulted data. The effectiveness of this method was tested by comparing the computer simulation results and measured data in a CNC machining center.

• Journal of information and communication convergence engineering
• /
• v.10 no.3
• /
• pp.237-241
• /
• 2012

In wireless sensor networks, the importance of transporting data correctly with reliability is increasing gradually along with the need to support communications between the nodes and sink. Data flow from the sink to the nodes requires reliability for control or management that is very sensitive and intolerant of error; however, data flow from the nodes to the sink is relatively tolerant. In this paper, with emphasis on the data flow from the sink to the nodes, we propose a mechanism that considers accurate transport with reliability hop-by-hop. During the process of sending the data, if errors occur or data is missing, the proposed mechanism supports error recovery using a fixed window with selective acknowledgment. In addition, this mechanism supports congestion control depending on the buffer condition. Through the simulation, we show that this mechanism is accurate, reliable, and proper for transport in wireless sensor networks.

• Journal of IKEEE
• /
• v.9 no.2 s.17
• /
• pp.170-178
• /
• 2005

The video data corrupted by the transmission error due to packet loss induce error propagation in decoded video data, and cause poor video quality. To remedy these corrupted video data, there have been introduced two types of error concealment techniques: spatial or temporal error concealment algorithm. Computational overhead by using spatial error concealment algorithm is a serious disadvantage in mobile video data streaming environment. In this paper, we propose hybrid type error concealment technique recovering video quality of mobile device using MPEG-4 video streaming on error-prone wireless network. Our algorithm is implemented in MPEG-4 decoder. The algorithm adopts Intel Wireless MMX technology to provide high performance of portable embedded multimedia mobile device. It is proven that the proposed algorithm shows expected performance for a mobile streaming system(PDA) on IP channels. Our approach showed better processing speed and better video quality comparing with traditional error concealment algorithm.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.44-46
• /
• 2005

Data storage related with writing and retrieving requires high storage capacity, fast transfer rate and less access time. Today any data storage system cannot satisfy these conditions, however holographic data storage system can perform faster data transfer rate because it is a page oriented memory system using volume hologram in writing and retrieving data. System can be constructed without mechanical actuating part therefore fast data transfer rate and high storage capacity about $1Tb/cm^3$ can be realized. In this paper, to reduce errors of binary data stored in holographic data storage system, a new method for bit error reduction is suggested. We proposal Algorithm use The Extended Kalman filter. The Kalman filter reduce measurement noise. Therefore, By using this error reduction method following results are obtained; the effect of measurement nois of Pixel is decreased and the intensity profile of data page becomes uniform therefore the better data storage system can be constructed.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.129-133
• /
• 2005

Data storage related with writing and retrieving requires high storage capacity, fast transfer rate and less access time. Today any data storage system cannot satisfy these conditions, however holographic data storage system can perform faster data transfer rate because it is a page oriented memory system using volume hologram in writing and retrieving data. System can be constructed without mechanical actuating part therefore fast data transfer rate and high storage capacity about $1Tb/cm^3$ can be realized. In this paper, to reduce errors of binary data stored in holographic data storage system, a new method for bit error reduction is suggested. First, find cluster centers using subtractive clustering algorithm then reduce intensities of pixels around cluster centers and fuzzy rules. Therefore, By using this error reduction method following results are obtained ; the effect of Inter Pixel Interference noise is decreased and the intensity profile of data page becomes uniform therefore the better data storage system can be constructed.

• The Journal of the Korea Contents Association
• /
• v.6 no.2
• /
• pp.65-74
• /
• 2006

The MPEG-2 video compressed bitstream is very sensitive to transmission errors due to the complex coding structure of the MPEG-2 video coding standard. If one packet is lost or received with errors, not only the current frame will be corrupted, but also errors will propagate to succeeding frames within a group of pictures. Therefore, we employ various error resilient coding/decoding techniques to protect and reduce the transmission error effects. Error concealment technique is one of them. Error concealment technique exploits spatial and temporal redundancies of the correctly received video data to conceal the corrupted video data. Motion vector recovery and compensation with the estimated motion vector is good approach to conceal the corrupted data. In this paper, we propose various error concealment algorithms based on motion vector recovery, and compare their performance to those of conventional error concealment methods.