• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.142-144
• /
• 2004

To provide more qualified data service on the HFC(Hybrid-Fiber Coaxial) access network, the channel characteristics of upstream transmission band should be carefully investigated and analysed. It will be easier to do network management if the monitoring system for noise measurement in the network is available, In this paper, noise analysis method and the frequency selection method in the upstream band for duplex transmission are suggested. And, Data aquisition device for the signal measurement Is implemented. With this network monitoring system, field test and the result from the collected data are described.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.2
• /
• pp.97-105
• /
• 2016

Microcontrollers (MCUs) for endpoint smart sensor devices of internet-of-thing (IoT) are being implemented as system-on-chip (SoC) with on-chip instruction flash memory, in which user firmware is embedded. MCUs directly fetch binary code-based instructions through bit-line sense amplifier (S/A) integrated with on-chip flash memory. The S/A compares bit cell current with reference current to identify which data are programmed. The S/A in reading '0' (erased) cell data consumes a large sink current, which is greater than off-current for '1' (programmed) cell data. The main motivation of our approach is to reduce the number of accesses of erased cells by binary code level transformation. This paper proposes a built-in write/read path architecture using binary code inversion method based on hot-spot region detection of instruction code access to reduce sensing current in S/A. From the profiling result of instruction access patterns, hot-spot region of an original compiled binary code is conditionally inverted with the proposed bit-inversion techniques. The de-inversion hardware only consumes small logic current instead of analog sink current in S/A and it is integrated with the conventional S/A to restore original binary instructions. The proposed techniques are applied to the fully-custom designed MCU with ARM Cortex-M0$^{TM}$ using 0.18um Magnachip Flash-embedded CMOS process and the benefits in terms of power consumption reduction are evaluated for Dhrystone$^{TM}$ benchmark. The profiling environment of instruction code executions is implemented by extending commercial ARM KEIL$^{TM}$ MDK (MCU Development Kit) with our custom-designed access analyzer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.349-354
• /
• 2009

In this paper, a new motion compensation scheme to reduce external memory access frequency which is one of the major bottlenecks for real-time decoding is proposed. Most H.264/AVC decoders store reference pictures in external memories due to the large size and reference blocks are read into the decoder core as needed during decoding. If the reference data access is done for each reference block in decoding sequence, the memory bandwidth can be unacceptable for real-time decoding. This paper presents a memory access scheme for motion compensation to read as many reference data as possible with reduced memory access frequency by analyzing reference data access pattern for each macroblock. Experimental results show that the proposed motion compensation scheme leads to approximately 30% improvement in memory bandwidth requirement.

• Journal of Korea Multimedia Society
• /
• v.10 no.12
• /
• pp.1612-1621
• /
• 2007

In this paper, we introduced our designed TDMA (Time Division Multiple Access) based MAC (Medium Access Control) protocol for Home Networks called HomeTDMA. We have implemented and tested it in a test bed using crossbow motes and TinyOS. We also have compared HomeTDMA and CSMA (Carrier Sense Multiple Access) in terms of space and time complexity, channel access time, delivery success ratio, and throughput. Based on our results, HomeTDMA has an advantage over CSMA on channel access time, throughput and delivery success ratioIn the case of complexity, HomeTDMA is more complex compared to CSMA. Thus, CSMA is more appropriate in wireless sensor networks (WSNs) where memory, energy, and throughput are important parameters to be considered. However, HomeTDMA has a natural advantage of collision free medium access and is very promising for home networks where a reliable transmission or data transfer and congestion control is highly preferred.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.35 no.3
• /
• pp.45-58
• /
• 2010

Due to rapid developments of IT technologies, convergence services like IPTV (Internet protocol television) are shown up. Even though expert and customer had great expectations for this innovative service, commercialization was delayed for years by the legal dispute between industry players. One of the biggest problems was that whether internet backbone providers have to share their internet network backbone with IPTV service providers (which don't have network backbone) or not. As other countries, Korean government set the rules that ISP have to offer indiscriminate access to other IPTV service provider. At the same time, internet backbone providers can charge access charge based on cost by way of compensation. Thus access charge is very critical to the IPTV industry players. The objective of this paper is to provide model that can calculate the reasonable access charge by system dynamics, based upon real data in Korean telecommunication industry.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.60.1-60.1
• /
• 2015

We present the current operation status of StarDB web services by showing its user access statistics. The StarDB web services started its operation in late November, allowing world-wide users to access results of new variability analysis for Northern Sky Variability Survey light curves. New analysis results of various time-series data have been added to the StarDB services. Importantly, our services have supported a simple cone search, which is an internationally well-defined catalog search interface in the international Virtual Observatory systems. We have collected user access statistics such as how users find our analysis data since its operation in later November. We expect our analysis of the StarDB operation to help Korean community members who plan and operate their own web services preparing for a future era of big survey data.

• Communications for Statistical Applications and Methods
• /
• v.15 no.1
• /
• pp.51-64
• /
• 2008

In general, R is useful for small size data. We study how to access a large data set in a database by R-language. We provide real examples to access data sets stored in database servers MySQL, Oracle or PostgreSQL.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.4
• /
• pp.358-381
• /
• 1991

In this paper, we construct a remote data access interface model using the IPC mechanism based on the monitor concept. A general purpose IPC mechanism which can be used to implement arbitrary forms of communications control over distributed processes in a network environment is developed as a basis to build the framework for the model. The interface model and synchronization mechanisms are presented for providing application processes with remote data access capability using the above IPC mechanism.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.2
• /
• pp.50-58
• /
• 1996

This paper proposes the channel-access protocol suitable to a very high speed photonic WDM network with star configuration, which can provide a high channel utilization and insensitivity to the propagation delay. The proposed protocol employs a control channel and a simple status table to deal with the propagation delay which has been a major limiting factor in the performance of the very high speed optical communication networks. The control channel transmits control information in order to reserve access on data channels, and each node constitutes a status table after the reception of control pckets which holds information about the availbility of destination node and data channel. The proposed protocol is insensitive to the propagation delay time by removing necessity of the retransmission and by allowing parallel transmission of control packet and data packets. It is proved in analysis and discrete event simulation that the proposed protocol is superior in throughput and mean delay, especially at the high load conditions compared to the existing high speed channel-access protocols.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.412-415
• /
• 1999

In this paper, we describe an implementation of the B-Link bus interface logic for a directory controller and a remote access cash controller in the SCI-based CC-NUMA multimedia server developed by ETRI . The CC-NUMA multimedia server is composed of a number of Pentium III SHV nodes and a SCI interconnection network. To communicate with remote nodes, each node has a CC-Agent which consists of a processor bus interface(PIF). a directory controller(DC), a remote access cash controller(RC), and two SCI 1ink controllers(LCs). The B-Link bus interface logic is developed for a directory controller and a remote access cash controller in order to communicate with a SCI link controller on a B-Link bus. It consists of a sending master controller a receiving slave controller, and asynchronous data buffers. And It performs a self-arbitration, a data packet transmission, a queue allocation, an early terminal ion. and a cut-through data path.