• International Journal of Safety
• /
• v.11 no.1
• /
• pp.22-25
• /
• 2012

Scoliosis can be biomechanically described as a three dimensional deformity of the spine, with deviations from the physiologic curves in the sagittal and frontal planes, usually combined with intervertebral rotation. Various factors are suspected such as genetic defects, uneven growth of the vertebrae, hormonal effects, abnormal muscular activity, postural problems, or a mix of some of these elements, but its initial cause is known in only 15-20% cases. The screening test for diagnosing scoliosis is called the Adams Forward Bend Test. During the experiment, the subjects were asked to bend over, with arms dangling, until a curve could be observed. The Scoliometer was placed on the back of the subjects and used to measure the difference between the left and right apex of the curve in the thoracic, thoracolumbar and lumbar area. Then, the subjects were asked to perform Maximum Voluntary Contractions (MVCs) using the digital back muscle dynamometer in three different postures: (1) 0o (sagittally symmetric); (2) 30o from the mid-sagittal plane (clockwise); and (3) 30o from the mid-sagittal plane (counterclockwise). In addition to the experimental data, subject-dependent variables including Body Mass Index (BMI), percentage of body fat and muscle mass of left/right arms and legs were employed to reveal the cause of difference among three MVC conditions. All those variables were tested using statistical methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.546-547
• /
• 2015

In this work, we implemented a system that a Robot catch up with the one ahead of it. We control the lead Robot by PC. The follower catches the movement of its precedence with ultrasonic sensors. We are going to develop an Android App for system control.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.8
• /
• pp.687-694
• /
• 2008

This paper is focused on the improvement of MOS device reliability related to deuterium process. The injection of deuterium into the gate oxide film was achieved through two kind of method, high-pressure annealing and low-energy implantation at the back-end of line, for the purpose of the passivation of dangling bonds at $SiO_2/Si$ interface. Experimental results are presented for the degradation of 3-nm-thick gate oxide ($SiO_2$) under both negative-bias temperature instability (NBTI) and hot-carrier injection (HCI) stresses using P and NMOSFETs. Annealing process was rather difficult to control the concentration of deuterium. Because when the concentration of deuterium is redundant in gate oxide excess traps are generated and degrades the performance, we found annealing process did not show the improved characteristics in device reliability, compared to conventional process. However, deuterium ion implantation at the back-end process was effective method for the fabrication of the deuterated gate oxide. Device parameter variations under the electrical stresses depend on the deuterium concentration and are improved by low-energy deuterium implantation, compared to conventional process. Our result suggests the novel method to incorporate deuterium in the MOS structure for the reliability.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.80-81
• /
• 2008

Schottky barrier thin film transistors (SB-TFT) on polycrystalline silicon(poly-Si) are fabricated by platinum silicided source/drain for p-type SB-TFT. High quality poly-Si film were obtained by crystallizing the amorphous Si film with excimer laser annealing (ELA) or solid phase crystallization (SPC) method. The fabricated poly-Si SB-TFTs showed low leakage current level and a large on/off current ratio larger than $10^5$. Significant improvement of electrical characteristics were obtained by the additional forming gas annealing in 2% $H_2/N_2$ ambient, which is attributed to the termination of dangling bond at the poly-Si grain boundaries as well as the reduction of interface trap states at gate oxide/poly-Si channel.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.38-45
• /
• 1989

We have studied the electrical characteristics of the hydrogenated amorphous silicon (a-Si:H) ambiploar thin film transistors (TET'S)using 100ppm boron-doped a-Si:H as an active layer. The enhancement of drain current due to the double injection behavior has been observed in the p-channel operation of the TFT. The drain current decreases with time in streched exponential form when the gate voltage is positive. The result indicates that the dangling bonds created by electron accumulation show identical time dependence as the diffusion of hydrogen in the film. We observed the experimental evidence that the doping efficiency changes either when the gate bias is applied or when the light is illuminated on boron-doped a-Si:H.

• Advances in materials Research
• /
• v.1 no.4
• /
• pp.245-268
• /
• 2012

Results of isothermal torsional oscillation tests are reported on melts of linear low density polyethylene and isotactic polypropylene. Prior to rheological tests, specimens were annealed at various temperatures ranging from $T_a$ = 180 to $310^{\circ}C$ for various amounts of time (from 30 to 120 min). Thermal treatment induced degradation of the melts and caused pronounced decreases in their molecular weights. With reference to the concept of transient networks, constitutive equations are developed for the viscoelastic response of polymer melts. A melt is treated as an equivalent network of strands bridged by junctions (entanglements and physical cross-links). The time-dependent response of the network is modelled as separation of active strands from and merging of dangling strands with temporary nodes. The stress-strain relations involve three adjustable parameters (the instantaneous shear modulus, the average activation energy for detachment of active strands, and the standard deviation of activation energies) that are determined by matching the dependencies of storage and loss moduli on frequency of oscillations. Good agreement is demonstrated between the experimental data and the results of numerical simulation. The study focuses on the effect of molecular weight of polymer melts on the material constants in the constitutive equations.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.2
• /
• pp.79-86
• /
• 2006

N-polar, Ga-polar, and non-polar GaN was grown by MBE and MOVPE using various substrates and influence of polarity has been investigated. The GaN growth by MOVPE is along cplane (0001), c-plane (0001), and a-plane (11-20) direction on c-plane (0001), a-plane (11-20) and r-plane (1-102) sapphire substrate respectively. The polarity of the film has a strong influence on the morphology and the optical properties of PA-MBE grown As-doped GaN layers. Strong blue emission from As-doped GaN was observed only in the case of N-polarity (000-1) layers, which was attributed to the highest concentration of Ga dangling bonds for this polarity of a GaN surface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.602-602
• /
• 2012

TCAD simulation을 이용하여 국부적 후면 접촉 구조를 가지는 단결정 실리콘 태양전지구조를 형성하고 실리콘 기판과 후면 passivation막 사이의 계면 특성 변화에 따른 태양전지의 전기적, 광학적 특성 변화에 대해서 연구하였다. 상기 연구를 진행하기 위하여 process simulator를 이용하여 후면에 국부적인 doped BSF region을 형성하고 device simulator를 이용하여 실리콘 기판과 후면 passivation막 사이의 carrier recombination 특성을 변화시켜 태양전지의 광학적, 전기적 특성을 분석하였다. Carrier recombination velocity의 감소에 따라 국부적 후면 접촉구조를 갖는 태양전지의 특성이 증가하는 것으로 관찰되었다. 이는 후면에서 실리콘과 박막 사잉의 결함이나, dangling bond에 의해서 carrier들이 재결합하는 확률이 줄어듦과 동시에, 후면 전극에서 carrier를 수집할 수 있는 확률이 커지기 때문이며, 800 nm 이상의 장파장영역 광원이 후면 passivation 박막에 의한 reflection으로 이차적인 carrier generation으로 인한 영향으로 판단되며 quantum efficiency 분석으로 규명하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.340-340
• /
• 2012

최근 MOS 소자들이 게이트 산화막을 Mono-layer가 아닌 Multi-Layer을 사용하는 추세이다. Bulk와 High-k물질간의 Dangling Bond를 줄이기 위해 Passivation 층을 만드는 것을 예로 들 수 있다. 이러한 Double Layer의 쓰임이 많아지면서 계면에서의 Interface State Density의 영향도 커지게 되면서 이를 측정하는 방법에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 $SiO_2$ Double Layer의 Interface State Density를 Conductance Method를 사용하여 구하는 연구를 진행하였다. Wet Oxidation과 Chemical Vapor Deposition (CVD) 공정을 이용하여 $SiO_2$ Double-layer로 증착한 후 Aluminium을 전극으로 하는 MOS-Cap 구조를 만들었다. 마지막 공정은 $450^{\circ}C$에서 30분 동안 Forming-Gas Annealing (FGA) 공정을 진행하였다. LCR meter를 이용하여 high frequency C-V를 측정한 후 North Carolina State University California Virtual Campus (NCSU CVC) 프로그램을 이용하여 Flatband Voltage를 구한 후에 Conductance Method를 측정하여 Dit를 측정하였다. 본 연구 결과 Double layer (Wet/CVD $SiO_2$)에 대해서 Conductance Method를 방법을 이용하여 Dit를 측정하는 것이 유효하다는 것을 확인 할 수 있었다. 본 실험은 앞으로 많이 쓰이고 측정될 Double layer (Wet/CVD $SiO_2$)에 대한 Interface State Density의 측정과 분석에 대한 방향을 제시하는데 도움이 될 것이라 판단된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.212-212
• /
• 2013

본 연구에서는 최근 다양한 전자 소자로써의 연구가 진행되고 있는 그라핀을 실리콘 기판위에 전자빔 식각(Electron-Beam Lithography)을 이용하여 TLM (Transfer Length Method) 패턴을 형성하고 가스 유입이 가능한 진공 챔버를 가지는 Probe Station을 이용하여 I-V 변화를 측정함으로써, 그라핀을 가스 센서 소자로서의 가능성을 연구하였다. 우리는 기존의 광식각을 이용한 TLM 패턴 형성과 더불어 전자빔 식각(E-Beam Lithography: EBL)을 이용한 TLM 패턴을 형성하여 I-V를 측정하였는데, 전자빔을 이용한 TLM 패턴의 형성은 광식각을 이용한 방법에 비해 더 세밀하고 미세한 패턴을 형성하는 것이 가능하다. 이렇게 형성된 그라핀의 TLM패턴은 가스 유량 조절이 가능한 진공 챔버를 가지는 Probe Station을 이용하여 측정하게 되는데, 이 때 저진공 상태의 챔버 내로 N2, H2 두 종류의 가스를 각각 유량을 변화시키며 주입하고 그 변화를 측정하였다. 유입된 가스는 그라핀의 Dangling Bond에 결합됨으로써 그라핀의 전도도를 변화시키게 되고, 변화된 그라핀의 전도도에 따른 I-V 결과의 변화를 측정하여 이를 가스 센서로 사용할 수 있는지를 측정하였다. 또한 유입되는 가스의 유량 변화에 따른 I-V 결과의 변화량을 통하여 가스 센서의 민감도 또한 측정하였다.