• Korea Trade Review
• /
• v.46 no.4
• /
• pp.149-166
• /
• 2021

This paper aims to reduce the frequency of dangerous goods storage accidents in China. Advocating the managers of warehousing and logistics enterprises to pay attention to the operation process of dangerous goods warehousing business. Improving the safe storage and management capabilities of dangerous goods warehouses. This article first collects official data on dangerous goods storage accidents in China and conducts a general statistical analysis of the accidents. Based on the results of accident statistics and related literature research on dangerous goods storage management, establish a dangerous goods storage safety management factor system, use the analytic hierarchy process, establish a factor importance questionnaire and implement data collection. Through statistics, this paper finds that the storage accidents of dangerous goods in China in the past ten years mainly occurred in the inbound phase of dangerous goods and the storage phase of dangerous goods warehouses. Through the results of the analytic hierarchy process, it is found that the professionalism of the dangerous goods storage practitioners, the compliance of the practitioners with safety regulations, and the awareness of operational safety are the most important.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.653-664
• /
• 2011

In this study, I collected materials through the survey whose object is 573 students of technical high schools and 512 students of academic high schools in Seoul and Kyunggi areas, for examining dangerous factors and protective factors which influence on school resilience in technical high schools. The studying results are as followed. First, as the result of analyzing correlation between school resilience and dangerous factor, the higher dangerous factor was, the lower school resilience was. Second, as the result verifying the effects of dangerous factor on school resilience, discrimination of teacher, delinquency bond and anti-sociality made an effect on students in technical high schools and discrimination of teacher, delinquency bond and depression made an effect on students in academic high schools. Third, as the result analyzing correlation between school resilience and protective factor, the higher protective factor was, the higher school resilience was. Forth, as the result verifying the effects of protective factor on school resilience, support of teacher, democratic atmosphere of school, sense of responsibility, family cohesion, self-worth, rational supporting attitude made an effort on students in technical high schools and support of teacher, democratic atmosphere of school, sense of responsibility and family cohesion made an effect on students in academic high schools. Fifth, as the result analyzing the difference between dangerous factor and protective factor according to grade of school and standard of school resilience, there was an interaction in variables of anti-sociality, depression, delinquency bond and self-worth.

• International Journal of Advanced Culture Technology
• /
• v.6 no.2
• /
• pp.30-35
• /
• 2018

In contemporary society, neglected families increase adolescents' maladjustment behaviors, causing academic problems, psychological and emotional problems, and showing flight behavior. By identifying the nature of the protective factor against the dangerous environment of a neglected family and increasing the protection factor for the children in a dangerous environment, it is necessary to create the environment so that the young can grow up positively rather than adversely. The purpose of this study is to identify the characteristics of adolescents who are psychologically adaptive at the level of general family children among the adolescents who are in a dangerous environment. The results showed that self - esteem, ego - resilience, ego - identity, and community variables had a significant effect on discriminating adolescents who showed high psychological adjustment from risk factors of neglect while controlling other factors. SPSS 20.0 was used to analyze the data.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.4
• /
• pp.867-876
• /
• 2013

Metabolic syndrome has been known as a major factor of cardiovascular disease. Several metabolic disorders, particularly chronic disease is complex, and from individuals that appear in our country, the prevalence of the metabolic syndrome is increasing gradually. Therefore, this study, using a multi-factor dimensionality reduction method, checks the major single risk factor of metabolic syndrome and suggests a new diagnosis results of metabolic syndrome. Data of 3990 adults who responded to all the questionnaires of health interview are used from the database of the 5th Korea national health and nutrition examination survey conducted in 2010. As the result, the most dangerous single risk factor for metabolic syndrome was waist circumference and the most dangerous combination factors were waist circumference, triglyceride, and hypertension. This is the result of a new diagnosis of the metabolic syndrome. Especially, waist circumference, low HDL-cholesterol and hypertension were the most dangerous combination for male. In particular, the combination of waist circumference, triglyceride and diabetes was dangerous for obese people.

• Journal of the Ergonomics Society of Korea
• /
• v.20 no.2
• /
• pp.47-57
• /
• 2001

To simulate an actual slip to measure floor slipperiness, slip resistance testers simulate slip in only forward direction because forward slip in the landing phase was found to be the most important factor for loss of balance. Backward slip in the take off phase was possible but was excluded in the friction test protocol because it was not dangerous. However, backward slip was tested in the friction test protocol without any theoretical background of the significance in generating dangerous slips and falls and was proven to be as good as forward slip in measuring floor slipperiness. Therefore, this study was designed to investigate the significance of backward slip in generating dangerous slips and falls with different combinations of floor and shoe sole. The results showed different tendency of backward slip in take off phase being significant in generating dangerous slips and falls because backward slip in the takeoff phase affected gait pattern disturbances seriously. resulted in dangerous falls. Fast toe velocity increased the severity of backward slip and confirmed the significance of backward slip in generating dangerous slips and falls. As a result, this study recommends the utilization of backward slip in the measurement of floor slipperiness.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.4
• /
• pp.68-77
• /
• 2008

When we design the grounding grid, dangerous voltage IEEE Std. 80 method has been commonly used in the domestic area. However there is not appropriative examination of ground design environment. So in this paper, we examined of IEEE Std. 80 touch voltage method's marginal utility and we induced corrective factor for those problems by comparison between IEEE Std. 80 touch voltage value and simulation experimentation value. Moreover, Logistic model's corrective factor we proved the maximum accidental error has reduced less than 10[%].

• Journal of the Korean Society of Safety
• /
• v.11 no.4
• /
• pp.115-121
• /
• 1996

This paper describes an analysis of the stress intensity factor (SIF) of the presented cracks in LNG piping. The stress analysis used the Finite Element Method. The stress Intensity factor calculated Raju & Newmann equation and ASME Section XI method. The cracks in the flanges are found to be influenced by temperature, but the cracks of the piping are found not to be influenced by temperature. If the cracks shape in the flanges and the cracks shape of the piping are same each other, the cracks in the flange will be dangerous more than the cracks of the piping.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.1
• /
• pp.1-14
• /
• 1996

The purpose of this study was an analysis of the elementary school child's attitude and dangerous factors of play apparatuses n elementary schools. The results were summarized as follows; 1. 53.0% of the reply child thought that play apparatuses were dangerous, and 41.0% of the total reply had experienced accidents by apparatuses, the child under 10 had experienced the accidents manytimes. 2. The types of injuries most frequently occurred are falls from play apparatuses, and part of the body most frequently injured parts of the body are arms and legs. 3. The danger of fall in play apparatuses that is over 3M amounted 19.6%, it asked safety of bottom materials. 4. Destructed play apparatuses reached up to 20.0%, and rusted or decomposed apparatuses reached to 28.4%. 5. The distance of each apparatus were very close ; it was within 0.3~1.5M, which was 24.9%, it was very dangerous factor. 6. The most frequent hazards of educational play apparatuses are ; - inappropriate size of apparatuses(height, gap, thick etc.)- inappropriate shape and finished state(bad welding and cutting, projection part etc.)- unsuitable use of bottom material in playground and safety color.- insufficient use zone.-inappropriate maintenance and inspection(endurance passage, erosin of iron-ware and wooden ware, projection of foundation concrete)

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.591-598
• /
• 2008

Recently, the government has improvement projects of dangerous road for the site that has very high accident rate due to bad geometric structures of the road. Although, route selecting of the road is a basic and important process, but the process of route selecting must consider the technical, safety and environment factor together. Also, the technology for the 3-dimensional terrain model can be used as an important factor in planning and designing for selecting alternative route projects. In the course of experimenting with the 3-dimensional topography generated by the combination of the digital map and drawing of route, the technology as been developed to offer the multi-dimensional access to the potential construction sites from the nearby main roads. This 3-dimensional digital elevation model has made it possible to make various terrain analysis base on GIS, which provides real-time virtual access to the designated construction sites for development planning and construction projects. Therefore, this study presents a reasonable plan for route selecting from some alternative routes through subjective evaluation and classify the methods linked basic design of road construction.

• Journal of the Korean Institute of Gas
• /
• v.25 no.2
• /
• pp.52-63
• /
• 2021

Analysis of risky behavior factors for workers in the manufacturing industry enables effective human error prevention and systemization of an efficient safety management system. This study examines the relationship between the effects of workers' work psychology, work environment, and work deviation factors on risky behavior intentions and the effects of such risky behavior intentions on risky behaviors. Among the small and medium-sized manufacturing industries, the analysis was focused on a survey of 80 workers in the manufacturing and processing industry. Looking at the results, it was found that work psychology and work deviation had an effect on the intention of risky behavior, but the work environment factors corresponding to job satisfaction and workload did not affect the intention of risky behavior. The relationship with colleagues, the degree of satisfaction or dissatisfaction with the job, the degree of importance of the job that the worker feels, and the tightness of time to digest a large amount of work do not affect intentionally inducing dangerous work, but they do affect risky behavior. In the absence of intention, the work environment factor was found to accompany dangerous behavior.