• 한국추진공학회지
• /
• 제21권2호
• /
• pp.9-17
• /
• 2017

비정상 충격파 유도연소의 주기적 압력 진동 특성을 연구하기 위하여 DMD 방법을 적용하였다. Lehr의 충격파 유도 연소 실험을 기반으로 수치적인 연구를 수행하였다. Lehr의 실험을 4 수준의 격자를 이용하여 수치적으로 모사하였으며, FFT 결과로부터 430-435 kHz의 주파수가 계산되었다. 실험 결과는 약 425 kHz로 해석 결과와 유사한 것을 확인하였다. FFT 해석에서 도출되지 않은 저주파 특성을 파악하기 위해 dynamic mode decomposition (DMD) 방법을 적용하였다. 여러 가지 모드 주파수가 계산되었고, 연소불안정 평가 인자 중 하나인 damping coefficient를 도출하여 안정/불안정성을 평가하였다.

• 대한토목학회논문집
• /
• 제13권2호
• /
• pp.111-120
• /
• 1993

본 논문은 에너지 분산 장치의 일종인 점탄성 감쇠기를 설치한 건물의 거동에 관한 실험 및 해석적 연구이다. 점탄성 감쇠기는 강지진 하중에 의하여 건물에 발생한 과도한 진동을 감소시키는데 효과적이다, 모드 변형에너지법을 이용하여 감쇠기에 의해 증가된 등가구조감쇠를 성공적으로 예측할 수 있으며, 따라서 점탄성 감쇠기를 설치한 건물의 지진 응답이 일반적인 모드 해석기법을 이용한 수치 모형 해석에 의해 정확히 예측된다. 이러한 결과를 토대로, 점탄성 감쇠기를 설치한 건물에 대한 설계 방법을 제시한다. 이 설계 방법은 일반적인 건물의 설계에 감쇠비라는 설계 요소를 추가함으로써 가능해진다.

• 소음진동
• /
• 제8권1호
• /
• pp.157-170
• /
• 1998

본 연구에서는 진동수에 종속된 GHM (Golla-Hughes-McTavish) 내부보조좌표를 사용하여, 3층 샌드위치보의 유한요소모델을 정식화하는 새로운 기법을 제안하였다. 내부보조좌표를 3층 샌드위치보에 사용하면, 비감쇠질량과 강성행렬의 운동방정식은 정성감쇠행렬이 포함되므로써 행렬의 요소들이 복잡하게 확장되어 진다. 따라서 이 방법은 실제의 많은 응용에 있어서 바람직하지 못한 유한요소모델의 행렬요소들의 증가에 따른 많은 단점을 갖게 된다. 따라서, 본 논문에서는 행렬요소들의 증가에 따른 여러 단점들을 제거하기 위하여, 행렬요소 감소방법을 GHM방정식과 합성된 운동방정식을 유도하는 새로운 방법을 제안한다.

• 대한기계학회논문집
• /
• 제10권5호
• /
• pp.593-600
• /
• 1986

본 연구에서는 베어링과 같은 기계 회전부품의 정밀진동분석을 위한 구동장치 로서 평판 자기결합기를 갖는 회전장치를 제작하였다. 이 회전장치의 진동특성을 고 찰하기 위해 Weinmann 등의 연구결과에 따라 자기 결합기의 전달 토오크가 그대로 피 동축에 전달됨을 이용하여 이론전개를 하였으며 이 결과를 실험치와 비교하였다.

• Smart Structures and Systems
• /
• 제8권2호
• /
• pp.205-217
• /
• 2011

This article describes the research work involving the implementation of an Active Bracing System aimed at the modification of the initial dynamics of a laboratorial building structure to a new desired dynamics. By means of an adequate control force it is possible to assign an entirely new dynamics to a system by moving its natural frequencies and damping ratios to different values with the purpose of achieving a better overall structural response to external loads. In Civil Engineering applications, the most common procedures for controlling vibrations in structures include changing natural frequencies in order to avoid resonance phenomena and increasing the damping ratios of the critical vibration modes. In this study, the actual implementation of an active system is demonstrated, which is able to perform such modifications in a wide frequency range; to this end, a plane frame physical model with 4 degrees-of-freedom is used. The Active Bracing System developed is actuated by a linear motor controlled by an algorithm based on pole assignment strategy. The efficiency of this control system is verified experimentally by analyzing the control effect obtained with the modification of the initial dynamic parameters of the plane frame and observing the subsequent structural response.

• Smart Structures and Systems
• /
• 제18권2호
• /
• pp.335-354
• /
• 2016

This contribution presents an extended one-dimensional theory for piezoelectric beam-type structures with non-ideal electrodes. For these types of electrodes the equipotential area condition is not satisfied. The main motivation of our research is originated from passive vibration control: when an elastic structure is covered by several piezoelectric patches that are linked via resistances and inductances, vibrational energy is efficiently dissipated if the electric network is properly designed. Assuming infinitely small piezoelectric patches that are connected by an infinite number of electrical, in particular resistive and inductive elements, one obtains the Telegrapher's equation for the voltage across the piezoelectric transducer. Embedding this outcome into the framework of Bernoulli-Euler, the final equations are coupled to the wave equations for the longitudinal motion of a bar and to the partial differential equations for the lateral motion of the beam. We present results for the wave propagation of a longitudinal bar for several types of electrode properties. The frequency spectra are computed (phase angle, wave number, wave speed), which point out the effect of resistive and inductive electrodes on wave characteristics. Our results show that electrical damping due to the resistivity of the electrodes is different from internal (=strain velocity dependent) or external (=velocity dependent) mechanical damping. Finally, results are presented, when the structure is excited by a harmonic single force, yielding that resistive-inductive electrodes are suitable candidates for passive vibration control that might be of great interest for practical applications in the future.

• 한국해안해양공학회지
• /
• 제6권4호
• /
• pp.340-352
• /
• 1994

Dean(1965)의 유량함수 비선형 파랑이론을 개선한 수치모형이 제시되었다. 유량함수 파랑이론 모형은 공학이용에 매우 정밀하고 유용한 모형으로 평가되어 왔다. 선형화친 연립방정식에 사용된 damping 상수와 적분에 필요한 격자점의 수가 수치해에 미치는 영향을 분석ㆍ평가하였고 수정된 Dean표(Chaplin, 1980)의 자료를 사용하여 정밀한 파랑제원을 계산하여 도표화 하였다. 쇄파에 가까운 파랑의 특성인 파장 및 그 밖의 특성들이 쇄파에 이르기 전에 극대값을 보임으로써 본 모형의 정밀도를 입증하였다.

• Smart Structures and Systems
• /
• 제2권2호
• /
• pp.141-154
• /
• 2006

Recently, the Hilbert-Huang transform (HHT) has gained considerable attention as a novel technique of signal processing, which shows promise for the system identification and damage detection of structures. This study investigates the effectiveness and accuracy of the HHT method for the system identification and damage detection of structures through a series of experiments. A multi-degree-of-freedom (MDOF) structural model has been constructed with modular members, and the columns of the model can be replaced or removed to simulate damages at different locations with different severities. The measured response data of the structure due to an impulse loading is first decomposed into modal responses using the empirical mode decomposition (EMD) approach with a band-pass filter technique. Then, the Hilbert transform is subsequently applied to each modal response to obtain the instantaneous amplitude and phase angle time histories. A linear least-square fit procedure is used to identify the natural frequencies and damping ratios from the instantaneous amplitude and phase angle for each modal response. When the responses at all degrees of freedom are measured, the mode shape and the physical mass, damping and stiffness matrices of the structure can be determined. Based on a comparison of the stiffness of each story unit prior to and after the damage, the damage locations and severities can be identified. Experimental results demonstrate that the HHT method yields quite accurate results for engineering applications, providing a promising tool for structural health monitoring.

• Steel and Composite Structures
• /
• 제50권4호
• /
• pp.403-418
• /
• 2024

In this paper, vibration and energy absorption characteristics of a nanostructure which is composed of two embedded porous annular/circular nanoplates coupled by a viscoelastic substrate are investigated. The modified couple stress theory (MCST) and the Gurtin-Murdoch theory are applied to take into account the size and the surface effects, respectively. Furthermore, the structural damping effect is probed by the Kelvin-Voigt model and the mathematical model of the problem is developed by a new hyperbolic higher order shear deformation theory. The differential quadrature method (DQM) is employed to obtain the out-of-phase and in-phase frequencies of the structure in order to predict the dynamic response of it. The acquired results reveal that the vibration and energy absorption of the system depends on some factors such as porosity, surface stress effects, material length scale parameter, damping and spring constants of the viscoelastic foundation as well as geometrical parameters of annular/circular nanoplates. A bird's-eye view of the findings in the research paper offers a comprehensive understanding of the vibrational behavior and energy absorption capabilities of annular/circular porous nanoplates. The multidisciplinary approach and the inclusion of porosity make this study valuable for the development of innovative materials and applications in the field of nanoscience and engineering.

• KIEE International Transactions on Power Engineering
• /
• 제4A권3호
• /
• pp.129-133
• /
• 2004

This paper deals with the design and implementation of a TCSC (Thyristor Controlled Series Capacitor) simulator, which is a module for an analog type power system simulator. Principally, it presents configuration of controller hardware/software and its experimental results. An analog type power system simulator consists of numerous power system components, such as various types of generator models, scale-downed transmission line modules, transformer models, switches and FACTS (Flexible AC Transmission System) devices. It has been utilized for the verification of the control algorithm and the study of system characteristics analysis. This TCSC simulator is designed for 50% line compensation rate and considered for damping resister characteristic analysis. Its power rate is three phase 380V 20kVA. For hardware extendibility, its controller is designed with VMEBUS and its main CPU is TMS320C32 DSP (Digital Signal Processor). For real time control and communications, its controller is applied to the RTOS (Real Time Operation System) for multi-tasking. This RTOS is uC/OS-II. The experimental results of capacitive mode and inductive mode operations verify the fundamental operations of the TCSC.