• Smart Structures and Systems
• /
• 제28권6호
• /
• pp.761-777
• /
• 2021

This study presents a numerical investigation on the sensitivity of electromechanical (EM) impedance responses to inner damaged concrete of a prestressed anchorage zone. Firstly, the Ottosen yield criterion is selected to simulate the plasticity behavior of the concrete anchorage zone under the compressive loading. Secondly, several overloading cases are selected to analyze inner damage formations in the concrete of the anchorage zone. Using a finite element (FE) model of the anchorage zone, the relationship between applied forces and stresses is analyzed to illustrate inner plasticity regions in concrete induced by the overloading. Thirdly, EM impedance responses of surface-mounted PZT (lead-zirconate-titanate) sensors are numerically acquired before and after concrete damage occurrence in the anchorage zone. The variation of impedance responses is estimated using the RMSD (root-mean-square-deviation) damage metric to quantify the sensitivity of the signals to inner damaged concrete. Lastly, a novel PZT skin, which can measure impedance signatures in predetermined frequency ranges, is designed for the anchorage zone to sensitively monitor the EM impedance signals of the inner damaged concrete. The feasibility of the proposed method is numerically evaluated for a series of damage cases of the anchorage zone. The results reveal that the proposed impedance-based method is promising for monitoring inner damaged concrete in anchorage zones.

• Advances in materials Research
• /
• 제5권1호
• /
• pp.11-20
• /
• 2016

In bonded composite repair of aircraft structures, the damage of the adhesive can thus reduce significantly the efficiency and the durability of the bonded composite repair. The adhesive damage models using critical zone have proven their effectiveness due to simplicity and ap-plicability of the damage criteria in these models. The scope of this study is to analyze the effects of the patch thickness and the adhesive thickness on the damage damage in bonded composite repair of aircraft structures by using modified damage zone theory. The obtained results show that, when the thickness of adhesive increases the damage zone increases and the adhesive loses its rigidity, inversely when the patch is reduced the adhesive damage be-comes more significant.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.106-109
• /
• 2001

In this work, we investigate the toughening mechanism of the rubber-modified epoxy resin. The fracture toughness($K_{IC}$) is measured using CT specimens for three kinds of rubber-modified epoxy resin with different rubber content. The damage zone and rubber particles around a crack tip of a damaged specimen just before fracture are observed by a polarization microscope and an atomic force microscope(AFM). Both the fracture energy($G_{IC}$) and the size of damage zone increase with the rubber content below l5wt%. The size of the rubber particles can be qualitatively correlated with the $G_{IC}$ and the size of damage zone. The cavitation of the rubber particles inside the damage zone is observed, which is expected to be main toughening mechanism by rubber particles. the stress which causes the cavitation of rubber particles is estimated by the Dugdale model.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.259-263
• /
• 2004

Rubber-modified epoxy resins have been employed as adhesive and matrix materials for glass and corbon-fiber composites. The behavior of fracture around a crack tip for rubber-modified epoxy resin is investigated through the acoustic emission (AE) analysis of compact tension specimens. Damage zone and rubber particles distributed around a crack tip were observed by a polarized optical microscope and an atomic force microscope (AFM). The damage zone in front of pre-crack tip in rubber-modified specimen $(15wt\%\; rubber)$ began to form at about $13\%$ level of the fracture load and grew in size until $57\%$ load level. After that, the crack propagated in a stick-slip manner. Based on time-frequency analysis of AE signals and microscopic observation of damage zone, it was thought that AE signals with frequency bands of 0.15-0.20 MHz and 0.20­0.30 MHz were generated from cavitation in the damage zone and crack propagation, respectively.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1162-1170
• /
• 2011

Since there is 70% of the land in South Korea is forest, tunnel constructions by blasting are common for building railways and roads. The damage to the bedrock and the development of overbreak near the face of the tunnel during the blasting directly affect the safety of the tunnel and the maintenance after the construction. Therefore, there is a need to investigate the damage zone in the bedrock after the blasting. The damage zone changes the properties of the bedrock and decreases the safety. Especially, the coefficient of permeability of the damaged bedrock increases dramatically, which is considered very important in construction. There is a lack of research on the damage that bedrock is received with respect to the amount of explosives in blasting, which is required for the design of optimum support in blast excavation that maximizes the support of the bedrock. Therefore, in this research, numerical analysis was performed based on the field experiment data in order to understand the mechanical characteristics of the bedrock after to the blast load and to analyze the damage that the bedrock receives from the blast load. In addition, a method was proposed for selecting the optimum blast pressure for train tunnel design with respect to the damage zone.

• 대한조선학회논문집
• /
• 제43권4호
• /
• pp.494-503
• /
• 2006

Inherent damage zone model is presented to explain the fatigue properties near the fatigue limit and the crack growth threshold consistently Inherent damage zone model assumes that the stress at a point which is located at a small distance, $r_0$, an inherent length of the material that represents the size of effective damage zone, from the crack initiation position governs the fatigue characteristics regardless of the geometric configuration of the specimen; smooth specimen, notched specimen or cracked specimens with short and long crack length. A special feature of the paper is using the exact stress distributions of notched and cracked specimens at the strength evaluations. Analytical elastic solutions by Neuber and Westergaard are employed for this purpose Relationship between fatigue limit of smooth specimen and threshold stress of cracked specimen, occurrence condition of non-propagating crack at the root of elliptic notch and circular hole and relationship between stress concentration factor and fatigue notch factor are discussed quantitatively based on the proposed model.

• Structural Monitoring and Maintenance
• /
• 제10권1호
• /
• pp.43-62
• /
• 2023

Damage monitoring is a prerequisite step to ensure the safety and performance of concrete structures. Smart aggregate (SA) technique has been proven for its advantage to detect early-stage internal cracks in concrete. In this study, a 1-D CNN-based method is developed for autonomously classifying the damage feature in a concrete anchorage zone using the raw impedance signatures of the embedded SA sensor. Firstly, an overview of the developed method is presented. The fundamental theory of the SA technique is outlined. Also, a 1-D CNN classification model using the impedance signals is constructed. Secondly, the experiment on the SA-embedded concrete anchorage zone is carried out, and the impedance signals of the SA sensor are recorded under different applied force levels. Finally, the feasibility of the developed 1-D CNN model is examined to classify concrete damage features via noise-contaminated signals. The results show that the developed method can accurately classify the damaged features in the concrete anchorage zone.

• Composites Research
• /
• 제16권4호
• /
• pp.44-50
• /
• 2003

균열선단에 발생하는 손상역은 재료의 파괴인성 메카니즘을 알 수 있게 하는 중요한 영역이다. 본 연구에서는 고무변성 에폭시 수지의 균열선단 손상역의 생성 및 성장 과정을 음향방출법을 이용하여 조사하였다. 고무변성 에폭시 수지의 고무함량은 5 wt%와 15 wt%로 하였고, 3점 굽힘시험편을 사용하여 모드 I 파괴시험에 대한 각 시험편의 파괴인성값을 구하였다. 또한, 균열선단의 손상역과 그 내부의 고무입자 변형상태를 편광현미경과 원자력간 현미경을 사용하여 관찰하였다. 고무변성 에폭시 수지의 균열선단부의 손상역은 파괴하중의 약 13 % 하중에서 생성이 되어, 약 57 % 하중까지 균열개시 없이 성장하였다. 57 % 하중 근처에서 개시만 균열은 최대하중부근까지 고착-활강거동을 반복하면서 안정 / 불안정 파괴로 진전하였다 이 과정에서 발생한 음향방출신호의 시간-주파수 분석결과, 고투입자 내부에서의 케비테이션 생성단계에서 주파수대역은 0.15 ∼ 0.20 MHz 이었고, 그 후의 안정 및 불안정시의 주파수 대역은 0.20∼0.30MHz 이었다.

• 한국지반공학회논문집
• /
• 제22권11호
• /
• pp.55-64
• /
• 2006

터널과 같은 지하 공동 굴착을 위한 발파로 주변에 손상이 발생하였을 경우, 암반의 역학적 및 수리적 불안정성을 유발하기 때문에 암반의 최종손상영역의 예측은 매우 중요하다 그러나 복잡한 발파거동으로 인해 손상영역을 적절히 예측하는 데에는 상당한 어려움이 따르고 있다. 이러한 어려움을 효과적으로 해결하기 위해 발파하중을 응력파와 가스압으로 분리한 많은 연구가 진행되었다. 응력파는 발파공 주위에 분쇄환(crushing annulus)과 파쇄균열대(fracture zone)를 형성시키며, 상당시간 지속되는 준정적인 가스는 파쇄균열대의 닫힌 균열내부에 침투하여 균열을 다시 진행시키는 역할을 하게 된다. 즉, 가스압은 최종적으로 암반에 손상을 가하는데 기여를 한다. 따라서 본 논문은 이러한 가스압에 의해 생성되는 균열의 최종 진행 길이를 예측함으로써 발파로 인한 최종 손상영역을 간단하게 예측할 수 있는 방법을 제시하고자 한다. 이를 위해 균질한 무한 탄성평면에서 발파공 주위에 대칭으로 형성되는 방사균열을 모델로 사용하였다. 이 모델에서 균열이 진행할 수 있는 조건과 가스의 질량이 일정하다는 두 가지 조건을 사용하였다. 그 결과 응력확대계수는 균열이 진행할수록 감소하여 최종균열의 길이를 산정하였으며, 또한 발파공에 작용하는 압력도 감소하는 것을 확인하였다.

• 한국터널지하공간학회 논문집
• /
• 제6권3호
• /
• pp.227-235
• /
• 2004

터널의 시공은 터널주변 지반에 구조적인 손상과 시공상의 손상을 불러일으킨다. 여기서의 구조적인 손상이란 터널굴착으로 인한 원지반응력의 교란으로 인하여 발생하는 것을 의미하며, 시공상의 손상이란 시공방법에 따른 주변지반의 손상을 의미한다. 본 논문에서는 원지반의 특성과 시공 중 손상을 고려할 수 있는 Hoek과 Brown 2002년도 공식을 이용하여 터널주변 탄 소성 영역에 작용하는 접선 및 반경방향의 응력 산정을 위한 식과 터널 주변 소성영역의 산정방법이 제시되었다. 또한, 매개변수분석을 통하여 암반의 등급, 무결암의 일축압축강도, 그리고 터널의 크기와 소성영역간의 상관관계를 조사하였으며, 기존의 연구에서 제안된 방법과의 비교를 통하여 본 연구에서 제안된 방법의 정확도를 검증하였다.