• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1241-1244
• /
• 1996

This paper present a performance evaluation method for Timed Place Petri Nets modeled by Live-and-Bounded Circuits (LB-circuits) through a bottom-up approach. The method can handle the case for the nets having common resources(CR). The target system is divided into the sub-systems by disconnecting the common Transition-Transition-Path(TTP) or Place-Place-Path (PPP) between sub-systems. The common PPP pattern is classified into Parallel Common Resource (PCR) and Sequential Common Resource (SCR) in detail for handling common resources. We evaluate the performance of each divided sub-system, and calculate the sub-systems affect on the performance of the whole system. The facts are generalized as a theorem. The developed theorem are applied into the performance evaluation of an automated assembly system shown in an example. All the results are verified by simulation.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.1
• /
• pp.114-125
• /
• 1993

Thermoelastoplastic analysis of a typical device consisting of fixed tube and movable case having an inital clearance in between, which is subjected to pressure and thermal load, has been carried out to examine the cause of malfunction mainly at high temperature condition, and to improve the design. Stresses, deformed shape, interface state and their effects on normal function of case are discussed by using finite element method. The extraction energy can be remarkably reduced by changing the configuration of tube from the present design (Parallel type) to the improved design (Tapered type). This effect has been proved by sustained cyclic function test.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.8
• /
• pp.66-75
• /
• 1999

In two-stroke engines, methods of evaluating scavenging effciency have been studied in parallel with trials for improvement of scavenging process. But simulating methods have a wide difference with difference with scavenging process in real engines and methods of evaluating scavening efficiency in real engines are very difficult and very expensive. This study shows that there is a possbility of evaluating scavenging efficiency in real engines very easily by analysis of in-cylinder pressure data. And as a characteristics two-stroke engines, the poly tropic indices in the process of compression are varies with degreeof scavenging and good representatives of scavenging efficiency.

• 연구논문집
• /
• s.30
• /
• pp.15-23
• /
• 2000

In this study, develop the thermal pump using water evaporation and condensation. Vapor from heating room moves up to pumping room and press the water of pumping room. Consequently water is pumped out to water tank. Then hot vapor direct contact with cold water in condensing room after pumping process. At this time, pressure of condensing room is down to-5kPa and suck in water of tank. This pump executes self ping and good durability because of no mechanical moving parts. Thermal pump is pumped cyclic so that, this pump is not used single. Therefore thermal pump of hot water boiler used to multi-stage for stable pumping rate. As the result of performance test, the developed thermal pump proves pumping action of water evaporation/condensation. And total volume flow rate is 500liter during one hour. If three thermal pump is installed parallel, this pump can use to the hot water boiler in the 300,000kcal/h class.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.457-462
• /
• 2007

The high tensile strength of steel cable enabled the development of long span cable bridges which that a better tensile element can break the limitation of current bridge design. A carbon fiber has at least strength as steel cable and is very light material relatively. Due to its characteristics. commercial carbon fiber cables are already used in place of steel prestress tendons. This study proposes a parallel carbon fiber(CF) cable for cable based on NPWS and CFCC cables. Static and nonlinear analyses reveal that the CF cable develops much less stress than the NPWS cable cyclic loads.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.2
• /
• pp.184-193
• /
• 2003

Cyclic sweep voltametry was performed to investigate the electrochemical behavior of heavy metal ions and the organic additives in surface finishing process. And electrolysis using parallel plate electrode electrolyzer was carried out to simulate the treatment of real waste water. Results showed that more than 99 percent of Cu was recovered and selective recovery of Cu in mixed waste water was possible, but the possibility of economical recovery of Ni and Cr were very low due to the evolution of hydrogen gas. Electrochemical oxidation of cyanide and organic additives on anode showed very excellent removal rate. The complete removal of several hundred ppm of cynide was possible within several tens minutes and organics within 2 or 3 hours. Even in case of concentrate waste water, the complete removal of COD by using NaCl and air stirring seemed to be possible.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.3
• /
• pp.29-35
• /
• 2006

Various types of elliptical motions are generated by PZT mechanism which is composed of two parallel piezoelectric actuators. Elliptical vibration cutting(EVC) is obtained by attaching single crystal diamond cutting tool to the mechanism, and V-grooving for Brass and Aluminum is carried out by applying the EVC. It is experimentally observed that the cutting force in the process of the EVC reduces compared to the ordinary non-vibration cutting, which is due to the decrease of undeformed chip thickness and frictional force between the tool and chip. Ultrasonic elliptical vibration cutting(UEVC) suppresses burr formation and decreases cutting force still more, so UEVC makes it possible to enhance the shape accuracy of machined surface.

• Journal of Information Processing Systems
• /
• v.10 no.1
• /
• pp.69-80
• /
• 2014

The free distance of (n, k, l) convolutional codes has some connection with the memory length, which depends on not only l but also on k. To efficiently obtain a large memory length, we have constructed a new class of (2k, k, l) convolutional codes by (2k, k) block codes and (2, 1, l) convolutional codes, and its encoder and generation function are also given in this paper. With the help of some matrix modules, we designed a single structure Viterbi decoder with a parallel capability, obtained a unified and efficient decoding model for (2k, k, l) convolutional codes, and then give a description of the decoding process in detail. By observing the survivor path memory in a matrix viewer, and testing the role of the max module, we implemented a simulation with (2k, k, l) convolutional codes. The results show that many of them are better than conventional (2, 1, l) convolutional codes.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.460-462
• /
• 2005

본 논문은 통신 시스템에서 오류 검출을 위해 널리 사용되고 있는 Cyclic Redundancy Check (CRC)회로의 병렬 구현을 위한 최적화 알고리즘을 제시한다. 논리 단을 최소로 하면서 가능한 않은 공유 텀을 찾아 매핑 함으로써 속도 및 게이트 수를 줄인다. 본 논문에서는 이더넷의 32비트 CRC를 병렬로 구현하여 성능평가를 하였다. FPGA 및 표준 셀 라이브러리를 이용하여 합성하였으며, 기존의 방식에 비해 속도와 면적 모두 향상되었음을 보여준다.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.224-228
• /
• 1997

Rolling contact fatigue tests were performed for two types silicon nitrides using disk- type specimens. Materials showed a fatigue behaviour similar to that typically found in metallic materials From the fractographic and metallographic observations, it has been found that the crack initation in the silicon nitrides subjected to rolling contact fatigue is to be induced by cyclic subsurface shear stress, as is known in steel bearing. On the mid-sections of the specimens, many subsurface cracks which lay parallel to the contact surface can be found at a depth where fluctuation of the Herzian shear stress was the maximum.