• 터널과지하공간
• /
• 제2권2호
• /
• pp.251-264
• /
• 1992

In this study, the size effect in measuring the fracture toughness of rock was investigated using the ISRM Suggested Method for Fracture toughness using Chevron Bend Specimens. Total 58 specimens were prepared with 4 different diameters, 29, 42, 54, 68mm and center cut-chevron notch. In addition to this, to evaluated the effect of anisotropy of Jecheon granite, which is the sample for this study, core drilling direction was adjusted perpendicular(short transverse) and parallel(arrester) to the rift plane in the sample and the measured fracture toughness for each direction were compared. Important results obtained from this study are as follows. Level ll test condition is more adequate than l, because of low data scattering and precision and corrected fracture toughness of Jechoen granite measured and 2.2MPa{{{{ SQRT { m} }}}} for arrester direction with minimum initial crack length 0.7cm. From the relationship between core diameter and initial crack length presented in the ISRM testing method, the specimen diameter should be bigger than 47mm. The fracture toughnesses measured for arrester and short transverse directon show 10% difference. This is to the anisotropy of Jecheon granite possessing rift plane.

• 전자공학회논문지A
• /
• 제32A권1호
• /
• pp.129-137
• /
• 1995

AlGaAs/GaAs HBTs have been fabricated using SABM (Self-Aligned Base Metal) process technique. The mesa type HBTs were fabricated through following steps: isolation implant, wet etching, metal lift-off, and airbridge interconnection process. The fabricated HBTs with 2umx10um size emitter showed a common emitter current gain of 10 at a collector current density of Jk=100kA/cm$^{2}$, a breakdown volgate BVCEO of 8V, and the ideality factors of base and collector junctions of 1.6 and 1.1, respectively. On-wafer S-Parameter measurement at 0.5~18GHz has been made for the characterization of the common emitter HBTx with a 2umx10um size emitter. The extrapolated current gain cut-off frequency of ft=30GHz and maximum oscillation frequency of fmax=23 GHz were obtained at a collector current density of Jc=70kA/cm$^{2}$. Small signal HBT equivalent circuit was extracted from the S-Parameter data.

• Journal of Power Electronics
• /
• 제11권1호
• /
• pp.74-81
• /
• 2011

The cutoff frequency of the output LC filters of PWM inverters limits the control bandwidth of the converter system while it attenuates voltage ripples that are caused by inverter switching activities. For a selected cutoff frequency of an output LC filter, an infinite number of L-C combinations is possible. This paper analyses the characteristics of output LC filters for PWM inverters terms of the L-C combinations. Practical circuit conditions such as no-loads, full resistive-loads, and inductive-load conditions are considered in the analysis. This paper proposes a LC filter design method for PWM inverters considering both the voltage ynamics and he inverter stack size. An experimental PWM inverter system based on the proposed output LC lter design uideline is built and tested.

• 소성∙가공
• /
• 제18권5호
• /
• pp.422-427
• /
• 2009

Computed tomography(CT) has been applied to measure micro-defects in the aluminum knuckle parts manufactured by the thixoforming process. 6061 aluminum alloys were used to form knuckle samples in the semi-solid temperature after the SIMA processing of billets. Tensile specimens were cut from the different locations in a thixoformed knuckle. The size and the distribution of forming defects in tensile specimens were analyzed using CT scanning and image analysis technology before tensile tests. It has been qualitatively shown that the stress-strain curves were significantly affected by the size and the distribution of forming defects although the defect sizes lie in the range of micro-meters.

• 한국임상수의학회지
• /
• 제19권2호
• /
• pp.236-238
• /
• 2002

A 10-year-old mixed male dog, weighed 4.2 kg, was referred to an animal hospital in Pusan. Clinical signs were generalized alopecia, cough, cardiac murmur, dehydration, and right side cryptorchidism. Testis was surgically removed, fixed in formalin and submitted to Diagnostic Laboratory, Chonbuk National University. Grossly, right testis was enlarged. A bulging tumor mass of right testis was homogeneous and grayish white in cut surface, but left testis was normal. Microscopically, no border lines of tubules were formed and the cells grew diffusely, forming sheets with scant supporting stroma. Tumor cells were flirty uniform in size and round or polyhedral, and had discrete cellular lines. The nuclei were large and of variable size, and ovoid, round, vesicular but the cell cytoplasm was scanty. Mitotic figures were common. And giant cells and vacuolated histiocytes were scattered, which is called starry sky appearance. This is the case of seminoma with diffuse type in a mixed dog.

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.58-64
• /
• 2012

Instead of the surface pattern arranged repeatedly in two axial direction on a plane, we propose double patterns superposing two one-axial linear patterns as a reference target for surface encoding. A upper layer of the superposed pattern is the transparent glass with grooves cut in it at a fixed pitch. The position is sensed by detecting a shift of beam due to difference of a refractive index. And a lower layer is the aluminum with color-coated grooves. The amount of beam reflected on the layer varies according to its targeting position and is detected for encoding. For the above reference pattern, we can detect two-axial positions using only the single beam. Furthermore, the pattern size can be expanded with a size of the detector kept constant, meaning that the measured range can be expanded easily. In this paper, we review the existing optical encoding methods for grid pattern, and discuss the hardware implementation of the suggested surface encoding method.

• 소성∙가공
• /
• 제3권3호
• /
• pp.320-334
• /
• 1994

A set of full size cold rolled steel sheets has been prestrained in the direction of rolling by uniform tensile elongation of 3% and 6%. Then mid-sized tensile specimens were cut from each of the full size sheets at 30, 45, 60 and 90 degrees to the rolling direction. The mid-sized tensile specimens were then prestrained again by uniform tensile elongation by 1%, 2%, 5%, 10% and 15%. finally, miniature tensile specimens were prepared from each of the mid-sized specimens at every 10 degrees to the specimen axis. From the tensile tests on miniature specimens material's hardening behavior under non-proportional loading has been investigated. There are a number of new observations which has not been known to the authors before current work. One of them is continuous reservation of orthoropic symmetry during tensile elongation of mid-sized specimens. Another is continuous rotations of orthotropy axes. Existing theories seem to fail to explain this observations. A new model is proposed in relation to the rotation of orthotropy axes.

• 한국유기농업학회지
• /
• 제25권1호
• /
• pp.53-69
• /
• 2017

The organic farming was begun with principles and values like environmental friendliness, symbiosis, and cooperation and circulation. And there has cut keen market competition, as sales and market size of organic agricultural products have been much larger. Thus producers and consumers have kept up with the market trend making light of the philosophy and principle of organic agriculture. So cases of fraud or false certification have been increased since 2010. Accordingly, not a few consumers have distrusted of the safety of organic agricultural products. And the status of organic agriculture has shown downward trend and market size of organic agricultural products has been reduced since 2012. Thus the income of organic agricultural farmers hasn't been increased. It is thought that present organic agriculture fell into the crisis. Now, organic agricultural farmers should practice farming methods based upon the philosophy and principle of organic agriculture in order to overcome its crisis.

• 생물환경조절학회지
• /
• 제22권2호
• /
• pp.175-181
• /
• 2013

최근 신선 유통되는 퉁퉁마디는 식물 체내 수분 함량이 높고 조직이 단단하지 못해 저장성이 낮은 식물로 MA 저장을 통해 저장성을 향상시키고, 최근 새롭게 개발된 비천공 breathable(NPB) 필름을 적용하여 각기 $5^{\circ}C$와 $10^{\circ}C$로 저장하여 실제 유통 수준에서의 영향을 알아 보았다. 또한 신선 편이 제품으로의 유통 가능성을 알아보기 위하여 3cm, 5cm, 그리고 10cm로 각각 절단하여 저장성을 상호 비교하였다. 그 결과 $10^{\circ}C$에 비하여 $5^{\circ}C$ 저장 조건이 NPB 필름을 적용 하였을 경우 저장력이 우수한 결과를 보였는데 저장중 생체중의 감소율은 $5^{\circ}C$에서 25일 저장 종료일까지 2% 이내의 결과를 보였고 $10^{\circ}C$에서는 저장 15일 후에 100,000cc NPB 필름을 제외하고 2% 이내의 감소율을 나타내었다. $5^{\circ}C$와 동일 기간인 15일을 기준으로 비교하면 $5^{\circ}C$가 1% 이내의 감소율을 나타내 상대적으로 우수한 결과를 보였다. 동일기간 동안 측정한 이산화탄소와 산소 농도의 변화에서는 5,000cc NPB 필름이 MA 저장시의 특징을 보였다. 저장중 포장내 에틸렌 농도는 진공 필름에서 NPB 필름처리들보다 10~100배까지 높았으나, 크기별 차이에 통계적 유의성은 없었다. 각기 $5^{\circ}C$에서 25일간 그리고 $10^{\circ}C$에서 15일간 저장한 이후 항산화 활성을 측정, 상호 비교한 결과 $5^{\circ}C$가 $10^{\circ}C$보다 두배 이상의 항산화 활성도를 나타내었고 100,000cc NPB 필름에서 높은 활성도를 보였고 크기별로는 10cm 크기가 활성도가 낮아지지 않는 것으로 나타났다. 저장 종료후 관능검사를 통한 외관품질과 이취를 평가한 결과 $5^{\circ}C$ 처리와 5,000cc 필름을 적용한 구에서 상대적으로 높은 수준으로 나타났다. 본 실험을 통하여 $5^{\circ}C$, 저장시 5,000cc NPB 필름을 MA 저장에 적용하는 것이 타당하다는 결과를 얻을 수 있었다. 다만 실제 유통 현장에서 사용되는 온도조건이 $10^{\circ}C$임을 고려하면 $10^{\circ}C$ 저장 시 10cm 크기에는 100,000cc NPB 필름이 단기유통이라는 측면에서 적용이 가능할 것 으로 판단되었다.

• Journal of Communications and Networks
• /
• 제10권3호
• /
• pp.316-330
• /
• 2008

This paper proposes a novel method for transporting various types of user traffic effectively over the next generation network called integrated services digital network 3 (ISDN3) (or quantum network) using quantum packets. Basically, a quantum packet comprises one or more 53-byte quanta as generated by a "quantumization" process. While connection-oriented traffic is supported by fixed-size quantum packets each with one quantum to emulate circuit switching, connectionless traffic (e.g., IP packets and active packets) is carried by variable-size quantum packets with multiple quanta to support store-and-forward switching/routing. Our aim is to provide frame-like or datagram-like services while enabling cell-based multiplexing. The quantum packet method also establishes a flexible and extensible framework that caters for future packetization needs while maintaining backward compatibility with ATM. In this paper, we discuss the design of the quantum packet method, including its format, the "quantumization" process, and support for different types of user traffic. We also present an analytical model to evaluate the consumption of network resources (or network costs) when quantum packets are employed to transfer loss-sensitive data using three different approaches: cut-through, store-and-forward and ideal. Close form mathematical expressions are obtained for some situations. In particular, in terms of network cost, we discover two interesting equivalence phenomena for the cut-through and store-and-forward approaches under certain conditions and assumptions. Furthermore, analytical and simulation results are presented to study the system behavior. Our analysis provides valuable insights into the. design of the ISDN3/quantum network.