• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권1호
• /
• pp.42-47
• /
• 2017

This paper proposes a new series-coupled voltage-controlled oscillator (VCO). The proposed VCO consists of four current-reuse Armstrong VCOs (CRA-VCOs) coupled by four transformers. The series-coupling, current-reuse, and Armstrong topologies improve the phase noise performance by increasing the negative-Gm of the VCO core with half the current consumption of a conventional differential VCO. The proposed VCO consumes 6.54 mW at 9.78 GHz from a 1-V supply voltage. The measured phase noise is -115.1 dBc/Hz at an offset frequency of 1 MHz, and the FoM is -186.5 dBc/Hz. The frequency tuning range is from 9.38-10.52 GHz. The core area is $0.49mm^2$ in a $0.13-{\mu}m$ CMOS process.

• 대한임베디드공학회논문지
• /
• 제18권1호
• /
• pp.9-17
• /
• 2023

This paper relates to the development of a device for measuring the efficiency of a solar panel based on a variable constant current, and proposed a standard for reuse of the solar panel. By applying a variable constant current circuit to a solar panel efficiency measuring device, it was easy to apply a maximum power point tracking (MPPT) algorithm. In addition, a load dispersion method was applied to measure the efficiency of a high-capacity solar panel. and it is possible to solve a problematic thermal runaway during a MOSFET parallel operation by applying the load dispersion method. As a result of the experiment, the solar panel efficiency measuring device was able to accommodate a large solar panel of 350W, which is the maximum measurement goal. In this paper, the validity was confirmed through the 310W solar panel efficiency measurement experiment collected after removal.

• 전자공학회논문지
• /
• 제54권2호
• /
• pp.53-57
• /
• 2017

본 논문에서는 의료 기기용 401MHz - 406MHz MedRadio 대역에서 사용하는 저잡음 증폭기를 제안한다. 제안한 저잡음 증폭기는 전류 재사용 gm-boosting 기술을 이용한 공통 게이트 증폭기 구조를 채택하여 기존의 gm-boosted 공통 게이트 증폭기에 비해 동일한 전력소모에서 더 높은 전압 이득과 더 낮은 잡음 지수 특성을 얻었다. 제안한 전류 재사용 gm-boosted 저잡음 증폭기는 $0.13{\mu}m$ CMOS 공정을 사용하여 설계하였고, 22 dB의 전압 이득, 2.95 dB의 잡음 지수, -17 dBm의 IIP3 특성을 보이며, 공급 전압 0.5 V에서 $170{\mu}W$의 전력을 소비한다.

• 한국물환경학회지
• /
• 제29권1호
• /
• pp.127-137
• /
• 2013

Reuse of wastewater will intensify in the coming decades due to water shortage, the change of climatic conditions, the need for industrial and agricultural use and the necessity of improving health and environmental conditions for the growing population. This paper considers (a) the status and trends of wastewater reuse and reclamation in the world, (b) case studies of wastewater reuse projects, (c) analysis of technology level, (d) forecast of global market, and (e) the future views and directions in development of wastewater reuse technologies. Based on the available documented literature, this paper provides a review assessment of the current status of the wastewater treatment processes including potential applications for reuse. Key challenges for both wastewater treatment and reuse are also discussed in the paper and include recommendations, e.g. cost, effluent water quality, energy use and technical solutions, for future developments.

• 한국경영과학회지
• /
• 제35권2호
• /
• pp.37-51
• /
• 2010

Understanding the antecedents of high public usage of national R&D facilities is a critical issue for both academics and facility managers. Previous researchrelated to general service management has identified service quality and user satisfaction as important antecedents of reuse and recommendation intention. The current paper reports findings from a survey which looked into the impact of service quality dimensions and user satisfaction on reuse and recommendation intention in the field of R&D facility public usage. Findings indicate that service quality appears to be linked to user satisfaction, and user satisfaction to be linked to reuse and recommendation intention. Findings also indicate that user satisfaction played as a mediator on the relationship between service quality and reuse/recommendation intentions in R&D facility public usage domain.

• 전기학회논문지P
• /
• 제56권2호
• /
• pp.65-73
• /
• 2007

In this study, the pulse charger and voltage regulator are proposed that can reuse the waste lead acid battery. The first we develop the voltage regulator that can reuse the waste lead battery. And the pulse current is applied to the terminal of the waste lead acid battery. The voltage regulator is available principle of the pulse current which can reduce the sulfate to incipient material such as Pb and PbO2. Therefore the internal resistance of the lead acid battery is decreased, the performance of the lead acid battery is improved and the durability is prolonged. The second we develop the pulse charger using the voltage regulator. The pulse charger uses the switch mode of the forward convert method. The pulse charger maintain the constant voltage in state removing the lead acid battery and when it connected the pulse charger, it is converted the charge mode of the constant current immediately. It continues the rapid charge until the full state of the lead acid battery. After that the pulse charger is converted to the charge mode of constant voltage automatically, and then it continues the normal charge. The experiment results show that the effectiveness of the voltage regulator and pulse charger such as the good performance and the prolonged durability in lead acid battery of the small and large capacity.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.228-228
• /
• 2015

Water reuse plays significant role in water saving and water environmental protection, and it helps alleviate the shortage of water resources. China's water reuse was put into practice since 1980s by means of pilot and promotion in National Fifth-year Plan and other strategies. The effects of water reuse is beneficial in both economic, social and environmental aspects. But some shortcomings still undermine future development of water reuse in China. To overcome and boost water reuse, Ministry of Water Resources conducted a successive survey across China. The aim of this study is to demonstrate the current condition of water reuse in China in construction, funds, legislation, planning, policy aspects, to summarize problems and its reasons underneath, to make suggestions for further development. Basically, in 2010, China's water reuse is 2.83 billion cubic meters and the utilization rate is 10.35%. Water reuse in China has four major characteristics: the first one is water reuse differences in amount occur national-widely and North of China has the main percentage as 47.3%; the second one is water reuse is mainly in environment maintenance (42.1%) and industry cooling (29.8%); the third one is funds for water reuse station and pipe construction is main in non-fiscal budget which take percentage as 56.8%; the fourth one is progresses of administrative system, political system, price management, standard system and technologies go rapidly recently. The problems of water reuse such as lack in water reuse station, delay in pipe constriction and limits on water reuse amount still exist due to some reasons. As a think tank of Ministry of Water Resources, we give some suggestions: firstly, water reuse needs to be integrated with traditional water resources allocation; secondly, public budgets need to be strengthened and income mechanism should also be constructed; thirdly, water resources integrated administrative of city and county should be boosted and roles as water reuse need to be clear and precise; fourthly, national, provincial and regional water reuse planning should be made in time; fifthly, regulations on water reuse should be programmed as soon as possible.

• 전자공학회논문지
• /
• 제51권11호
• /
• pp.94-100
• /
• 2014

본 논문에서는 전류-재사용 구조를 사용하여 1.95 GHz~3.15 GHz 의 광범위한 튜닝 범위를 갖는 저전력 전압 제어 발진기(VCO)를 설계하였다. 클래스-C 타입을 적용하여 위상 잡음 특성을 향상 시켰으며, 2 단계 자동 진폭 캘리브레이션 기법을 통해 전류-재사용 전압제어발진기 구조의 가장 큰 단점인 차동 출력 전압간의 불균형을 최소화 하였다. 차동 출력 전압간의 차이는 1.5mV ~ 4.5mV 가량으로 나타나며, 이는 출력 전압의 0.6% 이내 오차이다. 제안하는 전류-재사용 전압제어발진기는 CMOS $0.13{\mu}m$ 공정을 사용하여 설계 하였다. 공급 전압은 1.2 V를 사용하였고, 소모 전류는 2.3 GHz에서 2.6 mA이다. 출력주파수가 2.3 GHz에서 위상 잡음은 -116.267 dBc/Hz(@1MHz Offset)이며, 레이아웃 면적은 $720{\times}580{\mu}m^2$ 이다.

• 인터넷정보학회논문지
• /
• 제3권3호
• /
• pp.39-53
• /
• 2002

도메인 모델은 객체 모델 개발과 소프트웨어 설계에 관한 결정에 큰 영향을 끼치고 있어, 오늘날 많은 객체 지향적 시스템과 컴포넌트 기반의 소프트웨어 개발 시 도메인 모델을 만들고 있다. 그러나 UML과 객체 지향적 방법론에서는 재사용을 위한 개발과 재사용을 수반한 개발의 지원이 부족하여 매번 새로이 모델을 개발하고 있으며 프로젝트 개발 기간 지연과 불충분한 모델 생성을 초래하고있다. 이러한 문제는 UML 표기의 확장과 재사용 처리방법을 통해 해결될 수 있다. 본 연구에서는 도메인 모델의 재사용을 위하여 UML 기반의 도메인 모델 템플리트를 설계하고 분석정보의 재사용을 위한 도메인 모델 개발 방법을 제안하였다. 아울러 제안된 표현을 인터넷 응용에 적용하여 도메인 모델과 도메인 템플리트를 생성할 수 있었다.

• 한국정보통신학회논문지
• /
• 제10권8호
• /
• pp.1465-1470
• /
• 2006

본 논문에서는 단거리 무선 통신의 새로운 국제 표준으로 부상하고 있는 2.4 GHz ZigBee 응용을 위한 저전력 CMOS LNA(Low Noise Amplifier)를 설계하였다. 제안한 구조는 전류 재사용 기법을 이용한 2단 cascade구조이며 회로의 설계에서 TSMC $0.18{\mu}m$ CMOS 공정을 사용하였다. 전류 재사용단은 두 단의 증폭기 전류를 공유함으로써 LNA의 전력 소모를 적게 하는 효과를 얻을 수 있다. 본 논문에서는 LNA설계 과정을 소개하고 ADS(Advanced Design System)를 이용한 모의실험 결과를 제시하여 검증하였다. 모의실험 결과, 1.0V의 전압이 인가될 때 1.38mW의 매우 낮은 전력 소모를 확인하였으며 이는 지금까지 발표된 LNA 중 가장 낮은 값이다. 또한 13.83dB의 최대 이득, -20.37dB의 입력 반사 손실, -22.48dB의 출력 반사 손실 그리 고 1.13dB의 최소 잡음 지수를 보였다.